Windows fix disabled services and prevention

Similar Questions

• I have a Toshiba running Windows 7. I was wondering what was the "Windows Security Center" Service and what it does?

  I have a Toshiba running Windows 7. I was wondering what was the "Windows Security Center" Service and what it does?

  He will tell you the State of the AV / Firewall that is installed. Whether or not they are

• I've been using Photoshop CS6 Student Edition on 2 laptops; updated Windows 8 to 10 Windows without disabling CS6 and installer says I already have 2 options and that you can not install

  I bought Photoshop CS6 Student Edition through B & H in 2014 for two users, which I used in my 2 laptops and yesterday I have one of my laptops upgraded Windows 8 to 10 Windows without disabling the Photoshop CS6 Student Edition on it. Now, when to start the download of the software again in the same portable computer the installer says, I used 2 options and impossible to install any other software. What should I do to install the software again?

  A Win10 update is SUPPOSED to maintain all existing software without having to reinstall... so exactly how did you install Win10?

  In any case, to have your adjusted number of activations you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Disabling services and my toolbar settings disappeared!

  When my pc restarts about 80% of my services clear, msconfig says im start-up selective or diagnostic, even if I would have set to normal. I turn most of them and try to start, about 35% of them will start. My Os is xp sp2.  Thanks in advance, Teresa512

  Hi teresa512,

  Method 1

  This can happen if the computer is infected with virus or malware infections.

  I suggest that you scan and remove all infections from the computer and check if it works.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

  Method 2

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  (a) click Start, click run, type cmd in the Open box, and then click OK.

  (b) at the command prompt, type sfc/scannow, and then press ENTER.

  Note: you can be fast to insert the Windows XP CD.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to install the driver for printer Epson homepage says Windows could not finish as installer works not properly. Can I get a windows fix or diagnosis and remote assistance?

  Because it's part of windows, why it does not help with the problem? Lived the installation with the Epson phone while technical assistance process what to do and they say it's faulty Windows.

  Hi paul,.

  What is the exact error message?

  Check this box if this may help: http://support.microsoft.com/kb/315346

  http://social.msdn.Microsoft.com/forums/en/windowsgeneraldevelopmentissues/thread/f8d02788-04dd-42dB-8E74-55f980aa566e

• Help please - Windows update - restart issues (and upgrade to Windows 10 questions?)

  Hello

  I wanted to switch to Windows 10 but got stuck on the "start download" page, as have other users.

  Looking through the other questions on this site, I have seen that Windows update may need to complete before you start with Windows 10.

  I had not run windows update for a long time I thought that would mean Windows 10 would install and I wasn't ready for this, but now I am.

  Then I ran windows update and more than 150 updates have been installed.

  However, he now says:

  "Restart your computer to install important updates

  Windows cannot update services and important files while the system uses them.  Save... "

  I rebooted, shut down, rebooted several times, but this message continues to appear in the Windows Update window.

  Still, the update of Windows 10 stuck initially download.

  I ran disk cleanup in safe mode, as well as normal and tried to restart, but it did not help.  I tried the troubleshooting windows update option, but this did not help.

  I used two tools, the Microsoft FixIt who did not help and a WindowsUpdateDiagnostic.diagcab file which allows to find the two errors and saying: he fixed them, but this still does not work, IE always ask me to restart and Windows 10 gets stuck to download from.

  The two problems it finds are listed as:

  "Windows Update error 0 x 80070005(2016-05-30-T-08_49_44P)" and is listed as fixed

  "Problems install the latest updates" and is considered to be fixed.

  I am at my wits end and would be really grateful for the help.

  If this becomes technical, please help me in using a step by step method or referring to one for me.

  I have a laptop of Toshiba Windows 7 64-bit.

  Thanks in advance

  EDIT: I ran the above diagnostic tool and the error was fixed progresses over time, that is to say it is correct to say 09:03 now...  Also, to revise accordingly the so-called updates installed, many of them, but not all, have the status of a failed.

  What to do about all this?

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:

  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:

  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:

  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please restart your computer and wait 20 minutes for the system to operate before you download the information needed to help me investigate your problem. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows Error Reporting service not connected to the internet

  Since the center of the Action, when checking for Solutions is selected, the following error message is returned;

  Problem connecting to the Windows error reporting service.  Some of the reports can not be uploaded to the Windows error reporting service.  Please try again later.

  I had the same problem with Vista and now 7 does too.  Any ideas?  (I know that I'm connected to the internet, as I am posting this...)

  Hello Mr. Merritt,

  Welcome to the Microsoft Answers Forum!

  To solve the problem better, please let us know the details mentioned below.
  (a) if it works well before?
  (b) have you done with the latest changes on the computer?
  (c) is your computer connected to any domain?

  I suggest you to check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  Click Start > type of search in the services box, press enter > find windows error reporting service in the list of the list of services > right click and then click Start.

  Also run the service as automatic, please follow the steps below.

  Right-click on the service from the list of windows error reporting services and then click on properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Also I suggest you to temporarily disable the security software and settings of the firewall and check if it helps you to solve the problem.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• Problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  Hello

  When I present reports of error and asks me to send additional information, I get the above error. I have read and tried all the solutions already asked for this problem except for the removal of error reports (because if I do that, how could they be downloaded for analysis?)

  Just to confirm, I have:
  Restarted with a clean Windows with only Microsoft services running and no boot entry and retried the upload.
  A ran the SFC system without any problems.
  Insured to the logs and alerts are allowed through the firewall and temporarily disabled my virus scanner traffic analysis

  The persistent questions seem to be Google Reader goes down, and several accidents related to my AMD video driver.

  Hope you can help.

  Hi Kyle,.

  Did you do any change in software of hardware on the computer before this problem?

  You can read the following steps and check if it works.

  Method 1:

  Check if error reporting is enabled.

  For do I suggest you check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  a. click Start> type of search in the servicesbox, press enter > find windows error reporting service in the list of the list of services > right click , and then click Start.

  (b) also to run the service as Auto, please follow the steps below.

  c. right-click on the service from the list of windows error reporting services and then click Properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Note:

  The purge will remove the existing report but if the problem reappears to collect the reports again and you will be able to move forward with the process of reporting errors.

  Purge all existing reports by using the disk cleanup utility, and then see if you can send information to the server of problem reports.

  Refer to this help article.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  Please refer to Google Drive Known Issues, you can also ask your question in the support of Google using Google Drive question forums.

  For the problem with the AMD video driver, you can try to update the drivers for the latest on the manufacturer 's Web site and check if that helps.

  To know better the question you can always check the event viewer details related to the issue.

  With the event in the Event Viewer logs, you can get information about your hardware, software and components of the system and monitor the events of security on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Please return to the State of the issue and also let us know in case you need assistance on issues related to Windows.

• Want to access a SOAP service and display the data in the external list

  Hello

  I could see a WCF Service via the type of external content successfully. Now I want to access a SOAP Service and display the data in an external list in Sharepoint 2010. I am able to create a data source with success with the SOAP service, but how to display the data in the external list as external list uses only as data sources for external content types.

  Also with WCF as external content type, it is only on WCF services or any kind of web services can be added as an external content type.

  Any help would be appreciated.

  Thanks in advance

  Hello sunny198218,

  The question you have posted is related to Windows Communication Foundation Service and would be better suited in the MSDN forum for category Windows Communication Foundation. I've included a link to the forum where you can ask your question.
  http://social.msdn.Microsoft.com/forums/en-us/WCF/threads

  Sincerely,

  Marilyn

• Disabling services not microsoft and startup programs for Windows Vista

  I have Windows Vista on my laptop and for some reason some difficulties to install updates for Microsoft Office 2007 security. I got a microsoft support shadow person my computer and fix the problem for me. The problem is that I have to disable all non-microsoft services and first start a number of issues on my computer and I can't remember how he disabled them.

  In the Start Menu search box type "run" without the quotes. In the run box type "msconfig" without the quotes. When open the System Configuration utility, click the Services tab, check the box that says "hide all Microsoft services". When Microsoft services are hidden, clear the check boxes next to the other services. Click apply and then click OK, close the System Configuration utility and restart your computer. After installing the security updates restart if necessary, and then restart the System Configuration utility, put checkmarks in the boxes unchecked, you uncheck "Hide all Microsoft services", click on apply and OK, close the System Configuration utility and restart your computer. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

• What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

  I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

  I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

  I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

  Thank you.

  To check the event logs, go to start / Control Panel / administrative tools / event handler.

  To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

  I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 firewall service does not start automatically and cannot be started manually

  Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

  Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
  Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

  Firewall service is set to start "automatic."
  Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

  Falied given departure following the event log:
  Log name: System
  Source: Service Control Manager
  Date: 2009-11-06 12:19:25
  Event ID: 7024
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: VISTALAP
  Description:
  The Windows Firewall service is stopped with the special service error access is denied...
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7024
      0
      2
      0
      0
      0 x 8080000000000000
     
      99759
     
     
      System
      VISTALAP
     
   
   
      Windows Firewall
      %%d Ko
   
  

  Repository is consistent.

  Suggestions?

  Hi dynameme,

  What is a home or work computer? Is there any server/domain mean?

  Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

  STARTUP REPAIR

  If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows 7 installation disc:

  1. Insert the installation disc.

  2. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. choose your language settings, and then click Next.

  5. click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Installation of Windows 7 repair

  Information

  This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.
  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
  • It was reported that you can also lose your Media Center gadget after doing the repair facility.

  WARNING

  You will not be able to do a repair installation of upgrade mode without failure. Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation. You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

  Here's how:

  1. start Windows 7 and log on to an administrator account.

  2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

  3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

  NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

  4. click on the install button now to start the installation. (See screenshot below)

  5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

  6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

  7. check the I accept the license terms box, and click Next. (See screenshot below)

  8. click on the upgrade option. (See screenshot below)

  9. installation of Windows 7 will now begin. (See screenshot below)

  NOTE: During the installation, your screen may flash, and the computer will restart several times.

  10. after the final reboot, you will see this screen for a while. (See screenshot below)

  11. Enter your Windows 7 product key number. (See screenshot below step 12)

  12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

  NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

  If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

  13. click on the settings recommended. (See screenshot below)

  14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

  15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

  NOTE: It is best to choose a Public place for the best security.

  16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

  17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

  18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

  NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

  19 refresh your performance Windows (WEI) index score.

  20. when completed, all you need to do is to activate Windows 7.

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• Windows 7 Security Center service is missing from the (local) services and cannot be started

  Hi Experts,

  I use the version of windows 7 Home premium. My computer suddenly got hit by the virus and I found the message in the center of action as "Activate windows Security Center service", but when I do, the message I m getting "failed to start the windows Security Center service"

  Options, I tried to replace as follows.

  one) went to the services (local) and checked the Security Center to check the startup mode but the Security Center is missing here
  (b) tried to run the malwarebytes software, he finds some virus and I deleted

  Yet, I could not able to get rid. Help, please

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

  Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
  Chech also the serices dependent as below.

  References to Vista also apply to Windows 7.
  
  Check the default services and dependencies to ensure that they are running.
  http://wiki.blackviper.com/wiki/Security_Center

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  ====================================

  To look for the Windows 7 KB and responses for Solutions (most are above).

  Searck of Ko &-> 1058 Security Center
  http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

  I hope this helps.

• Redirects Web site and the Windows Security Center Service that cannot be turned on

  I have Windows 7, 64-bit and recently whenever I click on links such as google search I have continues to be redirect to randomly selected sites. Sometimes, I have to click on the link even 10 times just to connect, I wanted to see. In addition, I have a perpetual notification telling me the Windows Security Center Service is disabled and when I try to make it back, I get a message telling me that it cannot be started. Can someone tell me what is the problem and how to fix it?

  Hi Sir sniper,

  which web browser is installed on the computer?

  The question seems to be like a browser hijacking. I suggest you try the steps from the following links:

  What is the browser hijacking?
  http://www.Microsoft.com/security/resources/hijacking-WhatIs.aspx

  Difficulty to your browser hijacked webhttp://www.microsoft.com/security/pc-security/browser-hijacking.aspx

  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.