Windows HP Pavilion g7 8.1 missing ralink pcie adapter bluetooth

Similar Questions

• Pavilion 15 "2 years: replace ralink RT3290 adapter

  I'm fed up with my Ralink RT3290 constant of dropouts wifi adapter, reset, etc., I would buy a different brand adapter, can anyone suggest anything but Ralink.   I have HP Pavilion E0116AU 15 2 years.   I read somewhere on these forums that HP supports only some adapters.

  I am well aware of the switch, I have never activated, I'll watch the service guide.

  later: I see a mediatek should be MT7630E I'll try valid purchase.     Thank you for your quick help

  Thank you

• Pavillion 500-102ix Desktop Ralink RT 3290 Bluetooth driver missing

  Last month my bluetooth adapter no longer works so I uninstalled it it and tried to reinstall it. I downloaded the driver from the HP website but the driver manager says missing Ralink RT 3290 Bluetooth.

  Kindly help.

  Hello:

  If you run W8.1 use this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130262-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0011

  If you run W7/W8, use this driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Pavilion 500-451nl: controller Ethernet and PCI Simple Communications Center missing

  I bought a new HP Pavilion 500 - 451nl that came with 10 Windows installed.  I did not like the new OS so I refomated the hard drive and installed Windows 7 64-bit.  Now, Miss me the drivers for the following items:

  -Ethernet Controller:

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF103C & REV_0C

  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  -PCI Simple Communications Controller:

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C & REV_04

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_2AF7103C

  PCI\VEN_8086 & DEV_8C3A & CC_078000

  PCI\VEN_8086 & DEV_8C3A & CC_0780

  I searched on the site of HP but very confusing.  Can someone guide me to the right direction where I can download the drivers for the controllers above?

  Thank you

  Silvio

  Hello:

  Try this one... I explored the driver file after extraction of the pilot inside under components and look for the hardware ID you have posted...

  [Intel.ntamd64.6.2]
  ; DisplayName Section DeviceId
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1E3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1DBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_1D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9C3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_8CBA
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_9D3A
  % TEE_DeviceDesc % = TEE_DDI_W8_x64, PCI VEN_8086 & DEV_A13A

  This package contains the Intel Management Engine Interface driver for support of office models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73237.exe

• Pavilion 15-n201sk: driver missing

  computer hp laptop pavilion 15-n201sk windows 7 64-bit

  driver missing for:

  1 - Ethernet controller

  2 - Bluetooth controller

  3 Intel (r) 8 series xHCI HC - 9 c 31

  4. PCI device

  5 - video controller

  6 - unknown device

  Hello:

  You should be able to use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/product/HP-Pavilion-15-N100-notebook-PC-series/5436989/model/6422011/drivers

• Windows 8 pro and windows 8.1 pro 64 bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller

  Hello

  I have a HP Pavilion GP A10 AMD laptop 2313-AX. The latest drivers from the HP website for windows 8 pro and windows 8.1 pro 64-bit drivers ralink rt3290 and lan realtek PCIe FE Family Controller appear limited in my laptop, but in the same laptop connectivity when I start in Windows Server 2008 R2, both LAN and wifi works very well.

  Are there drivers available updated 2013 for these two hardware devices as dated?

  Are there universal or generic drivers that can act as a workaround?

  If so, please give me the URL for the same thing.

  Kind regards
  Sriram.

  Hi Steve,.

  I came across similar issues where the driver manually enabled users to solve the problem. Uninstall the current network adapter drivers and manually install drivers that you previously downloaded.

  a. press Windows key + R key, type devmgmt.msc, hit the Enter key to open the Device Manager.

  b. expand network adapters, right-click on the listed network adapter and select Update driver software.

  c. click Browse my computer for driver software, click Let me pick from a list of drivers for devices on my computerand then click on disk.

  d. in the dialog box to install from the disc, click Browse, locate the drivers, and then click Open.

  e. follow the steps described in the DeviceName update driver software dialog box to update the driver.

  Try these steps and let us know the results.

• RALink Bluetooth PCIe Adapter has a driver problem Windows 8.1 - code 39

  RALink Bluetooth PCIe Adapter has a bus PCI driver 2 problem. device 0. function 1 Windows cannot load the driver for this hardware device. the driver may be corrupted or missing (code 39)
  Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  HP ENVY desktop PC 700-050
  Serial number: MXX32503WL
  Product number: H5P83AA

  Hello

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.

  Follow the steps under Code 39 of this Microsoft article:

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Uninstall and reinstall the network driver to recreate a link from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5368252#N614

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• Windows XP showing ANIOApi.dll is missing

  Windows XP showing ANIOApi.dll is missing?

  http://forums.techguy.org/networking/802880-solved-wzcsldr2-exe-failing-upload.html

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19343605/19739436.aspx

  read these discussions.

  return ticket if the solutions work for you.

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows Boot Configuration data file is missing required information

  Hello

  I am trying to boot up my laptop and the Windows Boot Manager appears saying that Windows could not start.

  File: \boot\bcd

  Status 0xc000000d

  Info: The windows boot configuration data file is missing required information.

  I have a laptop Dell Inspiron notebook, which came with Windows 7 pre-installed so I didn't have an installation disc, nor do I have a CD player.  How can I solve this problem and is it simple?  I tried to turn on my new laptop and pressing F8 but nothing happens and the windows Boot Manager appears again.  Can someone help me please, or I'll have to return someone to solve this problem for me?

  Thank you

  Michael

  For questions of Windows7 you should repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.  It is a Forum of Vista so I wasn't expecting a question of Windows7.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Some VPCSE Windows 8 drivers seem to be missing

  My VAIO, model VPCSE16FX, is supported by Sony to upgrade to Windows 8. However, some Windows 8 drivers seem to be missing:

  1. the video drivers Windows 7 are a combination of AMD & Intel drivers while the only driver video Windows 8 listed is "Graphics of Intel® driver." I know that there is a combo for WIN8, driver for switchable graphics. I do not know how to interpret this: Will Windows Installer the driver AMD? Must I download direct from AMD? Should I install the Windows 7 video driver instead?

  2. the other drivers are missing completely from the list of Windows 8; for example, no audio driver doesn't appear, which is a concern that I found that Dolby drivers are essential to make the usable internal speakers. Also conspicuous by their absence in WIN8 list are a number of drivers of Intel/apps as well as the driver for the Synaptics touchpad. I have the same questions here; WIN8 will install these missing drivers? Should I upload them directly from their manufacturers? Can I install the versions of WIN7 instead?

  Thank you!

  Hello
  Thank you for your message
  We know, it lacks the Windows 8 drivers, such as the AMD graphics driver, Audio driver and touchpad for your VPCSE16FX and this driver have referred for consideration.
  We recommend that you check back the Page drivers VPCSE16FX occasionally in the coming weeks, as many models is updated driver that will be posted soon.

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Z600 Workstation: workstation Z600 missing of pci data acquisition and signal processing controller driver

  I just installed Win7 Pro x 86 on my Z600 workstation.  It was an upgrade to Windows XP Pro.  I'm missing the driver for PCI Data Acquisition and processing of the Signal and Hardlock USB 1.02 controller in Device Manager.  Can someone help me find these drivers.  I looked on the page of Support/Drivers for this model, but could not find anything.

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a professional worktsation.

• Pavilion Elite HPE-170 t - Wi - Fi adapter with antenna?

  I would like to connect to a desktop Pavilion Elite to a local network. The router is a Linksys EA3500 (802.11n technology). The distance between the router and the wireless adapter on the desktop will be about 30 feet with walls between the two.

  The office doesn't have an outdoor antenna. When I checked for network adapters, I found this: Realtek RTL8168 / 811D Family PCI - E Gigabit Ethernet NIC (NDIS 6.20).

  I use the computer for HD, movies, not for games. Should I buy a Wi - Fi adapter? And if so, which one of these adapters Linksys would give me better performance?

  1. a USB adapter - http://bit.ly/1tg8Cj1

  2. a card PCI adapter with antenna - http://bit.ly/1pzVpSt

  3. a USB adapter with antenna - http://bit.ly/1taGZd2

  Thank you

  Brescia

  Record office:

  Product name: BN496AV-ABA-HPE-170 t

  Product number: BN496AV #ABA

  Operating system: Windows 7 Ultimate 64-bit

  Hello:

  I have the AE3000 on two of my HP business offices.

  It has good reception and never had a problem with either of the units.

  I have a 2-story house with a finished basement.

  My Linksys EA 4500 router is on the second floor.

  One of my desltop of PC's in the basement.  The AE3000 on it, you get 4 bars of reception on the 5 GHz band and 5 bars on the 2.4 GHz band.

  Connection speed is 324 Mbit/s (out of 450) on my PC of basement on the 5 GHz band.

  Connection speed is 216.5 Mbps on bandwidth 2.4 GHz because I have this band the blended value that allows (wireless B and G) to connect legacy devices.

  It works fine on W7 x 64 and x 64 W8.1 (using the drivers W7 on the CD).

  It also comes with a 3' USB cable attached to a docking station so that you can position the camera somewhere for better reception.