Windows initialize with Veritical lines

Similar Questions

• When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  When I click on to develop, a blue rectangle appears, with two lines connecting opposite angles.  I was able to get a picture in this window.  Can anyone help?

  Hello

  Please open Lightroom and click on Preferences.

  Once the preferences window opens, go to the performance tab, and please make sure 'Use graphics processor' is unchecked.

  After unchecking the option restart Lightroom, and it should deal with the issue.

  Please let me know if it helps.

  Kind regards

  Tanuj

• Help, please! I need help installing own window 8 with LEGACY BOOT OFF

  Hello world!

  I am running in a difficult situation. During the installation of windows 8 UEFI with Legacy Boot Support off the POWER, then the WINDOWS SETUP doesn't detect any HARD or SSD drive. Then I had to install windows 8 UEFI Legacy BOOT SUPPORT market. When all install them, I turn OFF LEGACY SUPPORT, my computer running INACCESSABLE_BOOT_DEVICE error.

  Experts please help.

  With Legacy BOOT SUPPORT works, my computer so slow startup and there are too many startup steps taken in place.

  Thank you!

  SUMMARIZE:

  1: install Windows own 8 UEFI

  2: SECURE BOOT: WE

  3: THE LEGACY SUPPORTED STARTING: OFF

  Dear KNRK!

  I'm so happy. Everything seems to be in trouble, so I have to use the legacy on support. I installed the windows 8 install any update, and then upgrade to windows 8.1. The first initialization of the windows 8.1 installation, I go into the BIOS, then choose restore default.

  Like a charm, everything's fine. Now he worked on Legacy support OFF and Secure Boot on.

  BTW, I'm sharing my EXPERIENCE on installing windows 8 with UEFI.

  1. create UEFI USB BOOTABLE WITH RUFUS

  2. IF can detect the drive HARD or SSD IN WINDOWS SETUP is FINE

  If 2 is not available

  Go to 3

  3. TURN ON LEGACY SUPPORT

  3A - CREATE UEFI-BOOTABLE USB WITH RUFUS USNG MBR SYSTEM FOR BIOS

  4-USE TROUBLESHOOT - COMMAND PROMT

  5. CLEAN THE OS INSTALLED HDD

  6 - CONVERT TO GPT

  7-ACTIVE

  8 - RESTART

  9-HDD DETECTED

  10 INSTALL

  IF ENCOUNTER 03200024 ERROR 0 x

  SOLUTION - REMOVE ALL HARD DRIVE - JUST LEAVE THE OS INSTALLED HARD DRIVE

  AFTER FINISH INSTALLATION - REINSERT THE OTHER HARD DRIVE.

  TO OBTAIN AGAIN A MISTAKE.

  SOLUTION - CLEAN HDD VIA USB BOTABLE WITH MBR SCHEME FOR UEFI

  CONVERT HDD OS INSTALLED TPG, ACTIVE

  THEN AGAIN CREATE USB BOOTABLE WITH TPG TO UEFI SYSTEM

  EVERYTHING'S OK. BUT LEGACY SUPPORT MUST BE ON.

  INSTALL ALL OF THE UPDATE, INSTEAD OF UPGRADING TO WINDOWS 8.1

  IN THE FIRST REBOOT, GO TO BIOS THEN RESTORE THE DEFAULT SETTINGS.

  EVERYTHING'S FINE.

  GOOD LUCK, EVERYBODY

  Thank you very much for your help.

• Wiping Hard Drive, Reinstalled with Windows 7 with upgrade disk product key error

  My computer has been acting upward, so I back up hard drive and erased the hard drive with the BACK CLEAN ALL command. I then reinstalled windows 7 from my Windows 7 Upgrade disk and restore my files on hard disk. The computer works fantastic and returned half of the memory of the hard drive. A few days later, I get a message on the screen that I have 30 days left until I can produce a product key from the original Windows installation, does not accept the upgrade product key.

  I tried the product key located on the bottom of my laptop for Windows Vista comes with the HP computer. It does not work and it gave me no disk backup for Windows Vista from HP.

  I called Microsoft and they told me to contact HP for the product key. I see on this forum that someone else has written a similar plea, because it is a plea, and HP said to contact Microsoft. In other words, Microsoft says to contact HP and HP says to contact Microsoft.

  I use Microsoft since Windows 3.2 operating systems and have bought a lot of products of them. It's my 3rd HP laptop, my wife is on her 2nd HP laptop. Well you know what? If I don't get this resolved quickly by one of your companies, and I'm not remember Microsoft, I'm through the two of you.

  I don't see where Microsoft is not being fooled off but when it's to the detriment of a loyal customer, so don't worry. HP is also responsible for this. An upgraded version of Windows 7 (to upgrade from Vista or XP) should be smart enough (and I thought it was) to remember that I had the original version and its product key should be enough. Also I don't never told me that I had to keep the old product keys, and it doesn't matter anyway because the product key is always available in my laptop HP, but it does not work.

  I'm not buying another HP without your help and actually buying an Apple Mac for my wife and my next computer if it is not resolved. I think that HP is probably as bad as Microsoft so that it will not be solved and I'm not shelling out more money for something I already own.

  System information:

  Other OS Description not available OS manufacturer Microsoft Corporation system name MADRONA system manufacturer Hewlett-Packard model system HP Pavilion dv6 Notebook PC OS name Microsoft Windows 7 Home Premium Version 6.1.7600 X 86 - based PC processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz, 2133 MHz, 2 Lossnay Build 7600 system type, 2 logic or the BIOS Version/Date Hewlett-Packard F.24 processors , 12/06/2009 \Device\HarddiskVolume1 SMBIOS Version 2.4 Windows directory C:\Windows directory C:\Windows\system32 peripheral initialization system local United the States Hardware Abstraction Layer Version = "6.1.7600.16385" username madrona\majoraward Pacific Daylight Time zone installed physical memory (RAM) 3.00 GB Total physical memory 3.00 GB available physical memory 1.74 GB memory virtual 5.99 Total available virtual memory 4.66 GB Page file space 3.00 GB Page file C:\pagefile.sys

  I used here from method 3 with success. Basically just throw the disc to upgrade from in Windows and make install an inplace upgrade.

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media-128512

• Initialization with 34970A on GPIB problems

  I have a built in LabVIEW 7.1 that takes data from a pair of 34970A executable and 34401, using comms NOR-488.  I have no problem at all to get data. My problem - an intermittent one - occurs during the initialization of the 34970A.  The problem has persisted for a few years.  I use 3.1 NI-VISA.

  The problem is that the 34970A puts in error during initialization, with an error-113 (undefined header).  When single-browsing the Initialize.vi HP34970A I can see that the error occurs as soon as the * IDN? request is sent to the 34970A via the function Write VISA.

  I tried many things: 1. concatenated in a line of constant power to the * IDN? query.  2 tried a 34970 driver later.  3 replace the 34970 A.  4. replace the cable release between 34970 and 34401 (although, as far as I can see, it is unimportant).  The only solution I found is to reset the 34970A.  Sometimes, it works.  In the attached picture you can see where the * IDN? request is sent to the instrument.

  Johnboy:

  I think the problem is with the command sent before this one.  Maybe something flying in the transmission of the buffer that the * IDN? query command gets added, causing the equipment to get confused.  Time out NI SPY max to check what is happening.

  Bill

• Debugging starts with command line arguments?

  How to start the debugger to a program installation command line arguments? I've never had the need to do this before and I am puzzled as to how to do it now. I added a couple of command line arguments to control some run time options and I don't know how to start the debugger with the options passed to the program. I used cela in the past to start two different execution through a pair of icons of Windows shortcut with properties: goal: target option1a option1b chemin_acces_de: path_toexe option2a option2b but they have so far been so trivial that I never really had to try them under the debugger. How to start the debugger and the RCGA and * argv [] variable configuration when main() is called? It is a modification of a very old project, so I use CVI 5.5 here, if it's important. -wally.

  Hey Wally.

  In CVI 5.5, you can go to the menu Options in the project window and choose ... command line to specify command line options to use when debugging.  In more recent versions of the CVI, this option is located under the menu run .

  NickB

  National Instruments

• How can I install Windows Xp with Windows Vista?

  INSTALLATION OF WINDOWS XP WITH WINDOWS VISTA?

  I HAVE WINDOW VISTA HOME PREMIUM 32-BIT IN MY SYSTEM, BUT SOME OF MY SOFTWARE IMPORTANT DO NOT INSTALL VISTA SO I TRY TO INSTALL WINDOWS XP WITH VISTA BUT IT DOES NOT WORK.
  AFTER AWHILE, I SEE THE TYPE OF HARD DRIVE IN MY SYSTEM IT IS AHCI IN THE CASE OF VISTA, WHEN I CHANGE TO THE SECOND IDE TYPE THEN XP IS INSTALLED AND WORKING BUT VISTA IS DEAD AND WHEN I CHANGE TO NEW TYPE OF DISC TO AHCI THEN VISTA THROUGH REPAIR AND BECOME WORK VERY WELL , BUT DESTROYED XP.
  BOTH THE WINDOW WORKS ON DIFFERENT DISC TYPE AND WHENEVER THE DISC TYPE CHANGE, IT WILL TAKE VERY LONG TIME TO FIX THE WINDOW.
  IT BECOMES IRRITATING.
  WHY I CAN'T USE THE WINDOW AT THE SAME TIME?
  SO PLEASE GIVE ME THE GUIDE-LINE STEP BY STEP HOW INSTALL WINDOW XP WITH VISTA?

  Hi AbidAman,

  I suggest to check the following items and check.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

   

  Installation and reinstallation of Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

   

  Install multiple operating systems (multiboot)

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-more-than-one-operating-system-multiboot

   

  Set up a dual-boot system

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-dual-boot-system-from-Windows-Vista-inside-out

  Hope this information helps.

• Networking a laptop 64 bit Windows 7 with a desktop computer Windows Vista 64-bit

  I have a Dell desktop running 64-bit Windows Vista with a USB connected HP Photosmart printer operating system.  My wife used to have a laptop with an XP operating system and we have had no problem sharing the printer.  Now she has a laptop (HP) laptop to Windows 7 64 bit and fails to print.

  His laptop is connected wireless to Verizon FIOS router (wireless-g, I think).  I am connected by ethernet.

  If I look at a map of the comprehensive network of my Vista PC I can see his laptop and explore appropriate records of (public) level on his hard drive.   Sharing my Vista PC and are discovery options: network discovery:; File sharing:. Public folder sharing:; Printer sharing:; Password protected sharing: Off; The media sharing: Off.  My Vista shows the home network as a WORKING group.

  I use McAfee SecurityCenter and when I open the McAfee network map it also shows my wife's cell phone with its IP address.

  On my wife's cell phone two PCs appear on the map of the comprehensive network of the window and it shows my PC IPv4, IPv6 and MAC address, but if I try to 'Open' from my PC to the icon on the map, I get an error message suggesting I be spelled the name wrong or there is a network problem (error code 0 x 80070035 the network path was not found).  I ran the diagnostic of the error dialog box and he suggested to "make sure that the device allows incoming connections for printing and file sharing", the windows firewall settings.  Its network card qualifies to the network TPEN1, identity, assigned to the Verizon router. It shows his laptop connected by a dotted line (wireless)? to TPEN1 which is connected to a switch.  My PC is also connected to the switch which in turn is connected by a bridge to the Internet.  Options advanced sharing his PC for the home or work (current profile) are set on: turn on the discovery network. Enable file sharing and printing; Turn on sharing so anyone with network access can read and write files in public folders;  Media streaming is disabled; Use 128-bit encryption to protect file sharing connections (recommended); Disable password protected sharing;  Use the user accounts and passwords to connect to other computers.

  Its Norton Internet Security Network security map shows my PC as being in line with trust to full trust level.  It also shows the Swith and 2 generic devices with Shared Trust.

  So... anyone have any suggestions?

  Hello

  Maybe this can help.

  - ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  You should consider that many times the final solution could involve total uninstall of the 3rd party security Suits.

  In this case, you can be set at the same level with installing Microsoft Security Essentials which are used in the applications of a native Vista/Win 7 firewall and AntiVirus/AntiSpyware.

  http://www.Microsoft.com/Security_Essentials/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Photos of saved slide show appear with jagged lines

  Media Center

  Photos saved slide show appear with jagged lines like the pic was originally built with LEGO blocks, then smooth. recorded in Media Center-Transition the value NONE appears on the two (Medical Center) computer & TV through a DVD player. What are the causes of the first jagged lines. Thank you

  Hey woodytwoshoes,

  1 how long have you had this problem?

  2. it happens with all registered slideshows?

  Step 1:

  I suggest you to check with another recoded slide show and see if the problem persists or not.

  Step 2:

  Also update the video card drivers and check:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Savan - Microsoft technical support.

• I have a microsoft wireless keyboard4000 when I try to use the question mark I get / can you tell me what the problem with it I was getting with a line above.

  I have a microsoft wireless 4000 keyboard when I try to use the question mark I get / can you tell me how to fix

  or what is the problem, I received an e with a line above.

  Hello
  
  1. what was your keyboard last working fine?
  2. you remember to make changes on your computer recently?
  Try the steps and mark for the question below.
  a. click the Start button, type region and language and press ENTER.
  b. click the keyboards and languages tab.
  c. click Change keyboards.
  d. in the pop-up window, click Legeneralonglet.
  e. under default input language, select English (United States) - US or any another language you use generally.
  f. click on the OK button.
  g. click OK button region and language.
  I hope this helps.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Icons for .docx files are rectangles with black lines on the inside

  I recently increased the size of the font on my computer for the icons (via the Customize option in the context menu in the office) one size higher (I think it's 10 now). I don't know if it's related, but now when I see the .docx files on my desktop and in folders in my documents instead of a rectangle with blue lines and a blue w, score in the corner, I see is a rectangle with a large number of black lines. It's not what I'm used to, and it's distracting. When I make the folders in my documents score show list view or small icons, I think the traditional icon. But when I do the plus icon (either medium or large size), I get this black rectangle. I don't know if Windows tries to give me a thumbnail of the file (or the first page of it) or not, but I'd rather widely by the icon traditional .docx.

  How can I get that back?

  I use Office 2010 on Windows 7.

  I agree, it sounds like it is trying to display a thumbnail.  To turn off power, click on organize up to left and go in options of records, then on the display, the first box tab, according to me, must "always show icons, not thumbnails.

  Unfortunately it also means that you will not see your thumbnails of photo either, just an endless sea of identical icons to 'image file '.

  You can also delete the thumbnail of the file itself.  Open the file in Word, choose "Save as" and uncheck the "save thumbnail" option until you press save (and confirm the replacement of the same file, save on top of itself with the non-thumbnail version).

• Taskbar Windows parade with only two visible icons

  How can I change this?

  It makes it slower find my open programs and Favorites.

  Help, please.

  AW

  Original title: taskbar Windows parade with only two icons visible instead of a horizontal line which shows all the...

  Who has not worked for me under Windows 7.  I found that unlocking the taskbar, and then double-click the two dotted vertical lines closely grouped to the immediate right of the star button, I was able to disable scrolling.

• I have a red circle with a line through it on my need for speed Shift II in my Start menu, the game does not open

  Problem: I have a red circle with a line through it m need for Speed Shift II in my Start menu.   I have never had a red circle with a line pop up on any program in my Start menu, I wanted to know why it happened and how to fix it. The game accepts updates in the form of 'Add packs' of special vehicles in the original site via the EA download manager sports. So I guess that the game is installed correctly, but the game will not open and run at all, not from the start menu, or by clicking the desktop icon. Any help learn more about the red circle with a line about my program and what to do in case it happens again.

  Recently, I installed my Windows 7 Ultimate OS on a SSD which had been replaced because of a total failure of the car. I've updated the operating system with all

  latest updated windows and the updates of my video card, motherboard, HHD and SSD updated; Thus, all the hardware and software are up to date.

  I was going to restore the disk using last good upward from the orginal SSD before he died a month or two ago. So I think this will probably fix my need for speed II problem, but since it's the first time I've ever seen this problem with a program I would like to know how to cope.

  Any help would be greatly appreciated,

  Take care. Skyraider33

  I've never seen what you describe in the Start Menu, either

  You have a new installation of Windows on your new SSD, Yes? If the game is on another HARD disk,
  is that what you did re - install the game after installing the new Windows?
  Otherwise try to reinstall the game and origin. He would register
  entries, both in the previous installation of Windows.

  If this does not help forums EA would probably be a better place to find out if the
  mods are the source of the problem.

• How to concatenate strings with the lines of a text file

  Hello
  I tried concatenate strings with the lines of a text file, but something is wrong with my code and I belive is the agruments I use in the cycle for. If anyone can help me I will appreciate it very much.
  My code is:
  [code]@echo off
  the value "input=C:\Users\123\Desktop\List.txt".
  for /f "usebackq tokens = *" % in (' input % ') do)
  the value 'str1 = C:\some directory\ ".
  the value ' str2 = %% ~ F '.
  the value "str3 = .pdf".
  the value "str4 = str1% str2% str3%.
  echo.%STR4%
  ) [/ code]
  and the text file is something like:
  121122 [code]
  122233
  123344
  124455 [/ code]
  But I get only one wrong answer and I have to run it like 3 times to get a real result and it is a mistake, the first two are empty spaces and gives the third one as the last line of the text file but repeated n times, where n is the number of lines in the text file.
  Result:
  [code] C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\Users\123\Desktop>concatenate.bat
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\some directory\124455.pdf
  C:\Users\123\Desktop>[/code]
  So if anyone has an idea about what is wrong please let me know.
  Concerning
  -Victor-

  Hi Victor,

  This forum is dedicated to the support of the Office of consumer Windows (fonts, colors, personal settings).  Since your question is about programming and usually outside the context of most of the customers, I suggest you post your question in the forums as http://msdn.microsoft.com - the Microsoft network to users will be more adapted to help you in your quest.

• 11.4 install on XP Pro 32-bit MSIE crashes with error: line 1, ActionGtbCheck not defined in adobe.js

  Have been updated Flash via download for years on XP - Pro SP3 MSIE. I must say Adobe updates have been fraught with problems and frustration. From two updates ago, update crash with a yellow error notification window, saying error on line 1: not found ActionGtbCheck from Adobe.js. In frustration, I uninstalled Flash completely and started with a clean slate. Verified that no Adobe.js is anywhere in the system. Same error on new install, no update. Now, I don't have any Flash and can not download. On the Net, came across the endless negative comments about the rawness of the tools to update Abobe software compared to modern update interface from other providers. Someone knows a way to work around this error? Forgive my insensitivty.

  Thank you.

  Two things simple base should solve this problem

  Step 1:

  Install the latest Java - http://www.java.com/en/download/index.jsp

  Step 2:

  Install Flash using the standalone installer - http://www.filehippo.com/download_flashplayer_ie/

  Who should fix it if all goes well. Let me know. Thank you!