Canon 5 d MKIII - autofocus problem

Similar Questions

• Canon Pro 9000 MKII printing problem

  When I try to make a 5 "X 7 print with Photoshop CC (towards 2015.0.1) using my Canon Pro 9000 MKII I get an error 1062 say printer the paper width is set to false (it is not)." The printer prints, paper and fine same photo using Lightroom.  My computer is the retina 5K of Mac with OS X Yosemite 10.10.5.

  Hi Jermer073,

  Well this will be the key to the space bar on the keyboard. Press and hold down the SPACEBAR when you click Print on the file menu.

  Thank you

• Canon 5 d Mkiii problem with multiple registration.

  Hello.

  I have a CF (32 MB sandisk extreme 60 MB/s) card and an SD card (sandisk 32 GB extreme pro 95 MB/s) inserted and in the menu under the Record func + map section I the func record. Rec. multiple value. My problem is that sometimes my video files are only copied to the SD card and not the CF card although the photo files are saved at the same time.

  Any help would be greatly appreciated.

  Canon 5 d Mkiii 50 mm f/1.4. EF 16-35mm f2.8L II USM.  EF 24-105mm f / 4L IS USM.

  EF 24-70mm f/2.8 L USM. EF 100 mm f/2.8 L Macro USM.  EF 70-200MM f/2.8 L IS USM

  Speedllite 430EX II

  I asked a videographer, a friend and he said...

  You can choose which films of map will be saved to, but there is no excess capacity or ability to mirror

  for movies with the 5 d Mk III.

• Cc 2015.4 Lightroom will not import video from canon 5 d mkii!

  I was able to import videos directly from my canon 5 d mkii in lightroom on my macbook pro 2015. IPhotos, bridge, and Lightroom show an error when I try to import videos from 5 d. Import photos perfectly fine, but no video. I tried to import the videos same in Lightroom to my pc and they import fine. I need to import it back in my mac! Help, please.

  Hello Stephen,

  It seems a problem with the destination folder, then I would suggest to check if you have read and write access to the destination folder where you try to import images.

  Also try to change the location of the destination folder, and then import the videos in Lightroom.

  Let me know if it helps.

  Kind regards

  Tanuj

• Print using the Canon Laser Base MF3220 printer problems.

  I have a Dell Inspiron purchased October 2012.  Until December 2013, I could use my printer Canon MF3220 Laser Base without problem. In December, something goes very wrong on my computer.  As a result, everything has been reinstalled.  I have managed to get my printer scanner works but cannot get my printer to work.  When I try to add the printer, I get the message that the active domain Directory Services is currently unavailable.  I'm ready to chuck both the laptop and the printer out of pure frustration.  Please could someone help me.

  Go to the Control Panel

  * Select Printers

  Click on Add a printer

  * Select Run as Administrator

  Now, try to add your network printer

• Captive capture for Canon EOS 1Dx MkII?

  Are there word on when there may be captive capture for Canon EOS 1Dx MkII?

  I guess it will be in the next full update for example LR6.6 or 2015.6 CRD

  The last update was a minor double dot release 6.5.1 with mainly bug fixes.

• is it possible to update or upgrade of LR4 to do read CR2 of Canon 7 d MkII

  LR4.4 does not read Canon's CR2 MKii 7 d files. What is the solution (or options)

  If you check the official list of the devices supported by Camera Raw

  you will see that the Canon 7 d Mk 11 was taken in charge of 5.7 LR.

  Since Lightroom is currently in version 6.1.1 LR /Lightroom CC 2015.1.1 and there will be no other updates to Lightroom version 4, you have two options.

  1. the upgrade to the latest version of Lightroom or

  2. download the latest version of Adobe DNG Converter (free from Adobe) 9.1.1 and convert the CR2 raw files from your Canon 7 d Mk 11 to the DNG format, then you can import the DNG files in LR 4.

• Camera Raw Support for Canon 7 d MkII

  Just try to get an idea if I should spend the $99.00 to buy at the Apple Store opening.  This may seem a little over the top, but the workflow, I miss by not having not RAW support in Lightroom is worth the expense of buying from opening.

  I find it very disappointing that Adobe do not have as the support yet for the new Canon 7 D MkII.  It is a VERY popular camera.

  Mostly I find this slowness on the part of very disappointing Adobe because they sell CC buy saying: "you always up-to-date software.  When you think Apple and Google Picasa have already taken care of the Canon 7 d MkII.  I might add that they had both for the camera within days of its release on October 31.

  So, after my little mug shot.

  Someone from Adobe can advise when we see Camera Raw support the new Canon 7DMkII?

  Although it is in beta, I'd be very happy to be a beta tester.  I have extensive experience in software testing and would be ready to do the beta-test structure.  I would be very happy if someone on Adobe Labs would contact me to Beta test for the 5 d MkII 7 Camera Raw support.

  Kind regards

  Tom Croll

  We have just released the new support for the 5 d MkII 7 with Lightroom 5.7. Here are the details from the release: 5.7 now available Lightroom

  Let us know how it goes.

  Kind regards

  Pete

• My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  My CS 4 has ceased to recognize the file Raw CR2 for my Canon 5 d MkII and G12?

  Run the Creative Suite cleanup tool, reinstall. However, according to the tables below, your G12 files should not be readable in CS4 at all.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  Mylenium

• I use LR 3.6 and CS6 with RAW 7.1.  Lightroom can't open images from a Canon 5 d MkIII - which CS6 c

  I use LR 3.6 and CS6 with RAW 7.1.  Lightroom can't open images from a Canon 5 d MkIII - which can CS6. Should I re-download 7.1 RAW or what I need to update to Lightroom?

  3.6 Lightroom is not and will not support files of 5 d Mk3.  Your choice is either to upgrade to 4.1 LR or convert the files to DNG.

• How can I import Canon. Generated by the new Canon 5 d MkIII CR2 raw files?

  Just got the new Canon 5 d MkIII and none of Adobe products can recognize files raw (called. CR2) it generates.

  I'd be happy just to be converted. DNG but converters do not identify them either.

  Anyone know of a solution for me?

  Thank you.

  Support for the EOS 5 d Mark III has been added to Lightroom with the 4.1 update:

  Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5393

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5392

• EOS T3i - Autofocus problem

  Hi gang... I have an intermittent problem with an EOS T3i I bought for my wife.

  It was a purchase of kit that came with the 18-55 mm IS II lens.

  It seems that the autofocus function works imtermittently on my camera. I still have 2 months left on the warranty, but I want to run this by the group.

  At startup, the unit works very well. The autofocuses of stepper motor, the camera's going to break a few (or more) pictures. I'll hear the engine step by step to do its thing, auto focus points viewfinder shows and illuminate. Confirmaiton focus light begins to blink. The camera will make the two beep. the camera will take the picture.  Now when things go wrong, they go really wrong for this device.

  If I change a scene where the camera will have to move the lens and the automatic re-development. Engine step th does not light, auto focus points viewfinder will not not turn on and the right focus confirmation light will blink. If I press the shutter button, nothing happens. I have no beep.

  I called Canon support and they suggested a low level format. I did it but the problem persists.

  just need conformation that it's not normal behavior and I was wondering if anyone else had this type of problem. Thank you very much! :

  OK you need start the normal process of elimination.

  The lens works on another camera?

  The camera works with a different lens?

  The contacts between the lens and the camera are clean? Try denatured alcohol and a q-tip.

  You have already set the camera to the factory settings? It is not the memory card, BTW. The unit should work if she has a card in it or not.

  If these simple things have no success, a repair shop is probably expected.

• Canon printer this print spooler problem

  I have a printer canon set up a network for the last 12 months without a problem.  Today, when I press print, the document goes to the spooler, but does not print.  Only when I restart the computer will display the items.  All other computers on the network are not performed.  According to the Canon when I called them, they said that I had a problem of print spooler.  The spooler is set to automatic and when I manually restart the spooler prints the item.  The printer driver has been reinstalled and I am sure this isn't the printer.  How can I solve this problem, then the element I want to print, print when I press the button? If the computer is connected to the router by cable, this problem does not occur

  Hello
   
  You can follow below link that can help you to solve your problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows7-64x-and-Canon-LBP7200CDN-print-spooler/a7485628-5790-44DD-9864-b48650afe0aa

• With my new Canon's MG7120 software installation problem

  I recently updated my homeoffice with a new Dell XPS running Windows 8.1.

  Bought a new Canon Pixma MG7120 to replace my old Epson printer.

  I tried to install the printer software from the disc that came with the printer.

  Ive been trying to connect wirelessly and my wireless router connects with my printer.

  My problem is when I run the disc.  When I get to the part of the installation, nothing happens.  All I get is a window telling me that "my firewall may try to block the installation of Canon and I should respond accordingly as" Yes, accept,... and no matter what the choice, I give myself to allow Cannon installation.:

  There is a button 'Next' at the bottom right corner and it will highlight when I place my cursur on that.  I clicked and nothing happens.  The installation should take between 5-10 minutes.

  Appreciate any comment or idea about it.

  Thank you

  CSantos

  

  I'm so disappointed.  I bought a brand new Pixma MG7120 for my grass hobby photograhy.  Finally, my old Epson Stylus photo passed his end of life phase where it is no longer supported.

  I have a new PC with os Windows 8.1.

  I was so excited, winning this new printer.  I followed the instructions to the letter and bam, phase of the Installation stalls.  The screen is just sitting there doing nothing.  I tried again to recharge etc... with the same results.

  I'm not a computer programmer and am really frustrated and angry that I have to go through this bs... and still not get the printer running.

  I went in the Drivers Canon section and set to date.  Still nothing.  I tried downloading online and still nothing.  Always the same stall during the installation phase.  Just can't get past that.

  What is going on?  I spent $250.00 on printers and ink and even impossible to print a letter.

  I have tried wireless and usb and a big '' NOTHING. ''

  I ask the support over the weekend and if I'm still able to print, I'LL RETURN the UNIT AND FIND ANOTHER BRAND THAT WORKS.

  

• Canon 6 d light leak problem?

  Anyone has any idea what this is all about?

  https://www.Facebook.com/photo.php?v=10153703965930366

  Here is a timelapse I did today with my 6 d but obviously something is not majorly. Should I send it to Canon? Someone at - it a similar problem?

  Normally, whenever your eye does not cover the viewfinder, you would cover the viewfinder to prevent light leaks through the pentaprism.  Canon usually provides a small rubber plug that you attach to the Canon neck strap.  Remove you the eyecup and slide the CAP in its place (press the sides where the eyecup has rubber grip ridges and drag upwards - some of my organs, you don't have to press, he'll just slide up - but I don't own a 6 d).

  But I was reading the comments on your post facebook - if I understand, you said the following:

  • you get the problem with three different lenses - probably isn't a matter of lenses
  • you have tried to completely cover the camera to block all light - it probably not leak in the viewfinder (btw, even if it was a leak through the viewfinder, which is not a default... all SLR cameras can do and that's why they give you the viewfinder cover.)

  You also showed a photo of the inside of the camera... you mentioned something about 'Hung', but unfortunately the shot was blurry, I couldn't see what was "hanging down.

  I can tell you that this is certainly NOT the shutter.  The camera has a shutter of focal plane with two "curtains" that move vertically.  If a trigger bit you had notice suddenly was unevenly lit being very dark everything at the top or at the bottom of the image ("Curtain" service is experiencing a problem) - but your question is a bright spot about 3/4 of the way on the right side and ends in.

  It could be something to "hang" and catch a reflection which at this place.

  On the inside of the camera, there is a replaceable glass by the user above the mirror.  When you use the viewfinder, the mirror is in position 'low '.  In this position, the light is bounced upward and on the frosted glass (you can view this as a rear projection screen.  When you look through the viewfinder of the camera, you actually see the frosted glass.

  The frosted glass is a framework or a tray that is hinged at the rear.  Normally that hinge never moves (the only time where it would move is when you open it to swap the glass.)  If the bin is not completely closed, it is possible the mirror isn't entirely swing clear (it would hit the status bar that keeps the screen in place.)

  Before going further, it's easy to scratch the ground glass and since it is a textured surface (for example, the frosted glass) it is important that you do NOT touch.  Canon actually provides a tiny tool when you buy a replacement screen so that you can open and close the drawer share screens - all of this without ever touching the screen (it looks like a pair of tweezers with a hook on the end).   Canon has replacement with different options screens, and models as well as original replacement screens if you damage your (they cost about $30).

  It may be wiser to watch a video: https://www.youtube.com/watch?v=YNwOr3g9gzA

  I used this video because it is for a 6 d specifically.  But the process is the same on many other models with CELS replaceable - so if you don't see it enough in detail, just look for other videos on how to share a screen of the development of the Canon.  While the screens are not the same between models, the basic concept of this image that keeps the screen is the same.

  BTW... does not by showing how to swap the screen up to 4 minutes into this video, in case you want to fast forward.

  I heard of cases where the screen update tray was not completely closed and it makes a bit of a problem.  The good news is that it is a remedy very simple just close the door.  It snaps closed.  The tab in the top-center is the output of the gate.  Normally to open the door you gently pull the tab toward you (you pull it gently) and it releases the tray so that it can swing down.    Once again... Avoid touching the screen with your fingers.  In the absense of the right tool, a Lint of _very_ clean cloth can be used.  Just push the status bar (do not press the screen... just the edge where you see the tab) until you hear a click in.