Windows is no longer allowed after P V conversion

Similar Questions

• Windows Vista no longer starts after re-installation (cursor black screen, white after installation)

  A few days ago I decided that I wanted to start my Dell Inspiron 1720, back to square one. I knew that there are a few options, so I tried to restore. I realized it let me only a month back in time and my computer was slow for about a year now. I looked through my manual that came with my laptop and decided to unstack reinstall drive in and all re - install Windows Vista. I realized after I put the disk in and from the installation, I forgot to disable my anti-virus (trend pro microphone). I don't know if this is causing the problem, but after the installation, I get a black screen with a white cursor. I let it sit for about 4 hours before I decided to restart my laptop. Once I rebooted, it wouldn't let me normally, start in safe mode, or start from the last successful boot. I then tried to fix with my Vista DVD and who do not have too much work. I also tried the restore and it tells me that I am running in a low state of diagnosis and it cannot be done. I tried to reinstall vista twice since then and I'm out of ideas. Help, please! I forgot to add, when I try to start in safe mode, it stops at the ckcdisk.sys (I think it's called).

  millsx89,

  When you install Windows Vista on the 1720 Insp, you need to install the SATA drivers during installation. That's why your system stops at this point. You can also boot into the bios by pressing F2 and changing the Sata in ATA instead of AHCI operation. And then install windows. You will need to change it back once you have installed windows and loaded the drivers.

  Thank you

  Jesse

• Windows XP no longer allows the dual core cpu to work together

  Among the recent windows updates (I think around October) caused my AMD core 7750 dual processor no longer work together.  What I mean by that is that when I use an application heavy processor as an anti-virus or a game it will allow only this program to use 50% of the total of the processor, when I use two of them at the same time, then windows allocates the other processor to the second task, also sometimes when you check the Task Manager I see that the CPU usage is 50% and has a 99% system idle process.  After Reinstalling windows xp processor works as it is supposed to, but I don't know what update is the cause of the problem, but it seems to happen after I get a rundll32 error if that helps any.

  I managed to fix it but I don't know exactly how, all I know is that the problem went away after I reinstalled windows xp again.

• Windows is no longer enabled after startup repair!

  Specifications of the computer: SL500 (model M 274633)

  2.26 Ghz dual core, Intel Centrino 2

  nVidia 9300 M GS

  2 GB of RAM

  I got a shock a week ago... Windows won't load and repair and recovery 4 commissioning. Ok... I tried Startup Repair tool because it seemed reasonable... It worked. Sort of.

  My version of Windows is enabled is no more, and even more annoyingly, because the key has already been activated Windows refuses to accept the current key!

  Now, Windows tells me I have the rest of today to activate... I gave in after that system restore has failed so that it starts every time and used R + R4 and tried to "restore to the factory. Which failed.

  That may have to do with the fact that I created my restore disks... However, I can not really on for about another week and a half restore disks, these are my holidays.

  I desperately need to keep my system intact, it is my lifeline. I live on an isolated island and this is my only form of communication with everyone, as being the main thing that I use for work or school.

  Can anyone help?

  Well, after spending some time on the ' net and pouring through hundreds of sites I came upwards with a fix "semi".

  I said I have type in a 'new' key when Vista application be activated first and the type of the key on the bottom of my computer.

  It works! Vista activated!

  Now however in the lower left corner of the screen there is a warning.

  Windows Vista (TM)

  Build 6002

  This version of Windows is not genuine.

  Very confused... There is absolutely no chance that it is a cracked version of Windows... I got it from a retailer of office.

• Computer with pre installed windows 7 no longer work after Windows installation 10

  Hello

  A few months ago, my son ordered a computer with Windows 7 pre-installed. He installed Windows 10 such as recommended with the message 'free upgrade'. Unfortunately, now the computer does not work at all and the computer doesn't seem to have a possibility of recovery (at least we cannot find it).

  In addition, the computer manufacturer does not meet one of e-mails and calls from some time. What can we do to recover his computer with Windows 7 or Windows 10 (I don't like which version of Windows)? Windows setup does not work 10 from scratch, the product key has not been accepted, probably because there is only a product key for a pre installed windows 7.

  Help, please!

  Kind regards

  John

  Have you checked to make sure that your drivers are up to date? Normally, this can resolve that many users experience problems after updating to Windows 10:

  How to: 10 things to do after installing Windows 10

  • How to: install and update drivers in Windows 10

  If the certificate of authenticity for Windows 7 sticker is connected to your computer, you can try to get the edition of Windows 7 then use your product key to reinstall:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  How to: perform a customized Windows installation

  See the section for Windows 7.

• Windows is no longer active after deployment

  I have 3 networks that deploy all Windows 7. Two networks use VMWare and is using WDS. When the machines are deployed, they declare windows will try to activate in 3 days but it never does. I can get the machine to turn on either by pressing enable now or a command prompt running at the level of the administrator and by using the command slmgr /ato. Is it possible to automate this?

  Better you the problem can be solved if you post on the forum Pro Windows 7: http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itproinstall

  J W Stuart: http://www.pagestart.com

• I have an asus x501a and windows 8 no longer works after update 8.1!

  Maybe you can help me I have a laptop Asus x501a and he's stuck in the menu of the bios it does not boot from BIOS. Heres how it happened the laptop was working fine then a message of Windows popped up and said that I had to improve my windows 8 and Windows 8.1 he do now or later if I chose now and he started installing and about 5 minutes in a message popped up saying that something was wrong with the installation of Windows 8.1 and the laptop back using Windows 8 Once again, but when restarted if it went straight to BIOS and won't come off it I tried everything the laptop has no CD/DVD drive so how can I get Windows to work again?

  Either reinstall later Asus information (if you can) or download and make recovery media and reinstall by following the instructions from Microsoft I posted in the first part of my initial response to you.

  Here it is again.

  Replace.

  http://www.ASUS.com/support/FAQ/1006133/

  This will help you.

  'Create the installation media for Windows 8.1 '.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Windows 2000 Server VM blue after the P2v conversion screens

  Hello

  I'm having a problem of blue screen with a virtual machine after a P2V of a box of Windows 2000 Server conversion. The bluesceen error is attached. The P2V was carried out using the latest version of VMware Converter.

  Someone at - he encountered this before? Any suggestions?

  Thanks in advance,

  Pedro

  It could also help...

  http://communities.VMware.com/thread/131499

• Pavilion A9Q88PA: Beep Long before you start window and sometimes repeated beep after starting windows without stop

  Recently, my laptop have long beeps after turning the power on before launching the window and the last ringtone for 5-10 minutes. Secondly, keyboard seems to have problem because without pressing the letters that he is out nonstop by itself. Touchpad not moving not too. able to surf on the net but unable to control the keyboard at all. If I press a letter, she repeats the letters nonstop. never had this problem before.
  I realize taking power was to change and have requested replacement. Is it because of the tis? BTW, my rate of hard disk performance is now 4.4.
  Please help advise. Thank you very much.

  Product model: A9Q88PA #AB4
  Product name: HP Pavilion g4-1322tx Notebook PC
  Serial number: 5CD15225B7

• Lately my Windows Live Mail is no longer allow me to attach files to the message.

  Windows live Mail

  Lately my Windows Live Mail is no longer allow me to attach files to the message.

  When I try, I get the following error window:
  "The file picker was suddenly closed by Windows" and this happens everytime I try to join.
  Send and receive e-mail works great.
  I also tried to run the command file check:
  c:\sfc/scannow
  invites me to insert the Windows XP Pro SP3 CD disc.
  Since this is a computer that is about 41/2 years I have
  original OEM Windows XP Pro disk, even if I've upgraded to SP3 via MS download
  How this rpoblem of e-mail can be fixed?
  I really need help with this question
  Thank you

  Hi Tell214,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://www.windowslivehelp.com/product.aspx?ProductID=15

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• Windows Update running long after the system restore Image

  This is my 2nd try at why put Windows runs so long.

  I did everything that was asked of me in my 1st post.

  My last answer a question for me was on 19 September 2016.

  Which was a Monday.
  Then silence. I don't know if anyone can help with this problem.

  It is still ongoing.

  But at least informed me that it is not something that can be done.

  Instead of silence.
  The links below are to my OneDrive. Please let me know if there is more information.

  Operating systems: Windows 7 Ultimate sp1 64-bit

  Recently I reinstalled Windows 7 with a system image backup.

  He took my computer the initial installation of Windows 7.

  When I checked for updates that need to be installed in the Windows Update control panel there are not.
  So I clicked Check For Updates.

  Rental search automatically updates, run first for 3 hours. Once again for 8 hours. Then once more for 20 hours.
  Each control time for updates still worked and no updates have been downloaded for installation.

  How can I get updates for my computer, if check for updates is not download any?

  Sheilah

  systemlog

  SystemInfo

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Flash player no longer works after safari 10

  Help! Flash Player no longer functions after the update Safari 10 22/09/16. His need for my childs home schooling... How can I fix? I reinstalled flash, rebooted, cleared on safari etc and it still does not work. All SWF downloads only instead of jumping in a reading window.

  Thank you!

  If you have installed the Adobe Flashplayer correctly and for the first time in Safari 10, you must activate it in the Safari preferences panel: Security: Internet Plug-ins: √ allow Plug-ins (plug-in settings...). In Control Panel, you will see a place to pick up Adobe Flash Player and a selection (when visiting other Web sites: on.) Then click done. Quit and then restart Safari.

  Working in the restoration of the functionality of Flash Player?

• Windows 7 is more authentic after 2 months.

  Long story short: my Windows 7 is more real after 2 months of use. I bought the computer from a recognized seller and this seems to have not been a problem. Windows Update has always worked and has always passed verification for all the MS downloads.
  Aside: About 1 month ago, I updated the current HARD disk to a DDI and copied the entire cross and abandoned the HARD drive. Everything worked very well (updates and all) until the day or 2 ago.
  I browsed the forums and tried to make sense of the MGADiag but nothing helped.
  Any idea?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - GJY49 - VJBQ7-HYRR2
  Windows product key hash: W5/6nm6F2UPXrCkY5xUhXb / + 21 = g
  Windows product ID: 00426-OEM-8992662-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {8EEAEE53-D7D6-4584-934D-AA5C35D18578} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120830 - 0333
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {8EEAEE53-D7D6-4584-934D-AA5C35D18578}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-HYRR200426-OEM-8992662-000062S-1-5-21-3276465773-2855726761-725573862Gigabyte Technology Co., Ltd.. GA-78LMT-S2P Award Software International, Inc.. F2 20120320000000.000000 + 000F6373C07018400FC04090409Pacific Standard Time(GMT-08:00)03100100Microsoft Office Enterprise 200712E0CFA584CBA586b1iY/5rXzpRuO63mEkI3 + LEkXZQ =89388-707-0572597-6517214

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600006-02-1033-7600.0000-3042012
  Installation ID: 013556417550549643139403435494750313091075529180722262
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HYRR2
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 4
  Trust time: 28/12/2012-13:34:44

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 12:25:2012 23:45
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: OAAAAAEABAABAAEAAAAEAAAAAgABAAEAln2UFzAkiDwYiBAzVPkwjp7/1ln0AT2Is8aO5qMMICE =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  MSDM GBT GBTUACPI
  SSDT AMD POWERNOW

  I bought the computer from a recognized seller and this seems to have not been a problem

  
  
  seems to me that you have bought from a crooked salesman.
  you have an Acer OEM SLP key on a motherboard retail. An OEM SLP key should communicate with slic table specific manufacturer yourself is to activate it. A motherboard retail is not a slic table. (this key works only on a win 7 compatible motherboard Acer.)
  You can buy a genuine windows.
  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates.