Windows Media Center-how change the titles of audio tracks

Similar Questions

• Cannot get remote windows media center to change the channel on Cisco DTA50! Help!

  During the TV signal together towards the top there is no option for "Cisco".  Then I select "Unlisted" and setting up tells me there is nothing that can be done and leave the whole upward. Media Center will learn the remote control IR codes because it does not pick up the DTA remote this process.   I was finally able to get a "tv signal" implemented by choosing comcast, although this isn't my cable tv company, , but still the wmc remote will not change channels on the DTA cisco. The wmc remote works fine and changes channels in the real of windows media center, but because the string must be changed on the real DTA there on some channel I entered on the DTA remote. Since I use record TV WMC, indicates on the guide, it's impossible, unless I can get the DISTANCE WMC, put in place to change the DTA channels!

  I need help!

  I was finally able to set up the remote after tweaking autour with IR receiver. I have even connected infrared diffuser!

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Xbox 360 and Windows Media Center interfere with the operation of the Vista computer.

  Since the implementation of an Xbox 360 for the family to use, turning power switch and return to the dashboard caused Windows Media Center on the laptop family to turn on automatically, which, in some cases, interrupts programs and blocks computer. Sometimes the computer will be same turns on automatically when the XBox is turned on.

  I've done everything I can think of to stop the problem, including 'disconnect' XBox WMC in the "Uninstall" the XBox and the XBox settings in the settings of WMC. I do not anticipate using WMC in the near future, I just want to stop this crazy to happen.

  Thanks in advance for any help and please ask if you need more information on my problem.

  Hello ebduhamel,

  1. what type of connection you have between the computer and the Xbox, it's a cable or a wireless connection?

  2. is it to wake up the computer from standby or everything just stops?

  I suggest you try the steps below and check if you have the same problem.

  This could be possible only if media sharing is enabled on your computer.

  I suggest that you turn off media sharing and make sure you always have the same question:

  a. click the arrow below the Library tab, and then click media sharing.

  b. turn off media to find that others share and share my media to check boxes, and then click OK.

  By clicking OK, you confirm that you want to turn off sharing for yourself. You will also be asked if you want to turn off sharing for everyone who uses this computer. Note that if you let one of the selected check boxes, some sharing services may continue to run in the background.

  c. When you are prompted to turn off sharing for everyone who uses the computer, follow these steps:

  To make your changes apply to all users of your computer (including yourself), click Yes.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).

  If I click OK, the program seems to function, but I was wondering if all the features or functions are working properly.   I checked the Microsoft and Windows Update Sites, as well as the Windows Media Center Site and there is no mention of this message or patches.  Is this a problem? Should I just ignore the message?  Is there a fix or update?

  I am running Vista Home Premium on a Fujitsu N6470 with Intel Core 2 Duo T575 clocked at 2.0 GHz and 3 GB of RAM.

  Hello Steve613,

  Thank you for your message.  In order to get this error, you will have to do some registry changes.  Before any modification of the registry, click on the link below to save your registry database.
  http://support.Microsoft.com/default.aspx/KB/322756
  Please follow the steps below to perform appropriate registry changes:
  Click 'Start' > type regedit in the search field and press ENTER.
  If you are prompted, select Yes to user account control
  Click 'Edit' > select 'Search' > type SymAddin in the search field, and then select "next".
  Remove all the entries that are found with SymAddin
  Restart your computer and test.
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
  Please let us know if it did or it does not solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• problems with Windows Media Center, rotation of the photos after burning a DVD

  During the preparation of photos, create a slide show using Windows Media Center, all the photos are well aligned. When I burn the DVD, some of the pictures are rotated 90 degrees. I double-check the photos in the file and they are properly aligned.

  Hello

  I suggest you pass by the mentioned below link and check that they are properly editing pictures in Media Center.

  http://Windows.Microsoft.com/en-us/Windows7/edit-pictures-in-Windows-Media-Center

• Windows Media Center opens but the program closes itself and offers no solution?

  Hello, I have windows vista family premium and Im trying to use my windows media center. I don't use it often, but now Im trying to add the Extender for my xbox 360. The program does not open, but then once I click on what anyone in the program or just scroll up and down he says "Media Center has had a problem, this program closes" and it offers no solution that relates to my problem. I have updated everything and even tried other solutions that were offered on this site, as the removal of the "data store file. Well, I do not have this file or can't seem to locate. Help, please!

  Try the steps in the following article.

  Article number: 916180 - you tried to configure your Xbox 360 as a Media Center Extender, but the installer is not started
  http://support.Microsoft.com/kb/916180/
   
  Thank you

• Cannot get Windows Media Center to learn the remote control codes decoder

  I'm trying to put in place my TV card in Windows Media Center in Windows 7.  The card is a Hauppauge HVR 2250, which has a blaster/IR receiver.

  The configuration of the set-top box tells me to point the remote at the receiver and "hold" the number 0.  The problem is that the remote control supplied with the set-top box (Motorola RG2400) is not constantly emits the same IR signal when I press and hold the button - signal IR lasts only about a year and a half seconds before turning off. This does not seem to be sufficiently long for Windows Media Center and never detects the signal.

  Can I make it work?

  Hello

  Looks like the remote is faulty I recommend you do replace from the cable/satellite for a replacement/repair provider.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My legal copy of Windows Professional 7 does not include Windows Media Center, how do I get it?

  I bought my copy of Windows 7 Professional as an upgrade to my computer Windows Vista of origin. Windows 7 was purchased through a special student discount program that Microsoft offered. How can I get Windows Media Center legally without having to 'upgrade' my copy of Windows 7 Professional (which, according to Microsoft, you should already have Windows Media Center installed)? Any help would be greatly appreciated.

  Thank you.

  I thought about it. Everything you have to do is go to control panel-> programs-> turn windows features turn on or turn off "windows media features"-> expand-> check windows media center.

  It's for Windows 7 Professional.

• Why windows Media Center only shows the most?

  Media Center Windows used to have a lot of tv shows also present and past to watch. But I've had my computer for three months and now I see there is no TV shows more. Microsoft has abandoned this service?

  If you're referring to the internet, TV,

  Microsoft does more Internet TV in Windows Media Center of 09 20, 2012.

  It will be supported.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/103422.aspx

• Windows media Center cannot find the path of HRESULT: 0 x 80070003

  I'm trying to put Windows media center tv, but I can't because of the # following can not find the path HRESULT: 0 x 80070003 someone can help - I heartily thank you David

  Uninstall, reinstall, and then update the TV tuner card. Visit the manufacturer's Web site to download and install the latest driver TV tuner card driver. Once that is done, try to reconfigure WMC from scratch.