Cannot get remote windows media center to change the channel on Cisco DTA50! Help!

Similar Questions

• Windows Media Center-how change the titles of audio tracks

  Edit titles when burning a CD with the media library.

  Is it possible to edit tracks I want to burn it to a CD with Windows Media Center?  Trying to get rid of long intro and outro, then I can fit more information on the disk.

  Not with Media Center, you need an app for that, likeAudacity (free) for audio editing special.
  Tim Baets
  http://www.BM-productions.TK

• Cannot get Windows Media Center to learn the remote control codes decoder

  I'm trying to put in place my TV card in Windows Media Center in Windows 7.  The card is a Hauppauge HVR 2250, which has a blaster/IR receiver.

  The configuration of the set-top box tells me to point the remote at the receiver and "hold" the number 0.  The problem is that the remote control supplied with the set-top box (Motorola RG2400) is not constantly emits the same IR signal when I press and hold the button - signal IR lasts only about a year and a half seconds before turning off. This does not seem to be sufficiently long for Windows Media Center and never detects the signal.

  Can I make it work?

  Hello

  Looks like the remote is faulty I recommend you do replace from the cable/satellite for a replacement/repair provider.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• How to get Vista Windows Media Center to really stop video

  During playback of a video in WMC the stop button takes me to the screen with various options beginning with 'Done '. When
  'fact' is selected the video goes into the small PIP with square stopped blue and remains here and in "Now Playing".

  How do I really stop a video rather than have him act as if he is only suspended.

  When I press 'stop' and 'fact' I want that it shut down completely.

  Hi Dazema,

  It is the occurrence of same process even in my computer when any type of video. This is normal.

  You can also pass the option to click on the left arrow to return to Windows Media Center options after stopping the video or the video playback.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think. If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Xbox 360 and Windows Media Center interfere with the operation of the Vista computer.

  Since the implementation of an Xbox 360 for the family to use, turning power switch and return to the dashboard caused Windows Media Center on the laptop family to turn on automatically, which, in some cases, interrupts programs and blocks computer. Sometimes the computer will be same turns on automatically when the XBox is turned on.

  I've done everything I can think of to stop the problem, including 'disconnect' XBox WMC in the "Uninstall" the XBox and the XBox settings in the settings of WMC. I do not anticipate using WMC in the near future, I just want to stop this crazy to happen.

  Thanks in advance for any help and please ask if you need more information on my problem.

  Hello ebduhamel,

  1. what type of connection you have between the computer and the Xbox, it's a cable or a wireless connection?

  2. is it to wake up the computer from standby or everything just stops?

  I suggest you try the steps below and check if you have the same problem.

  This could be possible only if media sharing is enabled on your computer.

  I suggest that you turn off media sharing and make sure you always have the same question:

  a. click the arrow below the Library tab, and then click media sharing.

  b. turn off media to find that others share and share my media to check boxes, and then click OK.

  By clicking OK, you confirm that you want to turn off sharing for yourself. You will also be asked if you want to turn off sharing for everyone who uses this computer. Note that if you let one of the selected check boxes, some sharing services may continue to run in the background.

  c. When you are prompted to turn off sharing for everyone who uses the computer, follow these steps:

  To make your changes apply to all users of your computer (including yourself), click Yes.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• problems with Windows Media Center, rotation of the photos after burning a DVD

  During the preparation of photos, create a slide show using Windows Media Center, all the photos are well aligned. When I burn the DVD, some of the pictures are rotated 90 degrees. I double-check the photos in the file and they are properly aligned.

  Hello

  I suggest you pass by the mentioned below link and check that they are properly editing pictures in Media Center.

  http://Windows.Microsoft.com/en-us/Windows7/edit-pictures-in-Windows-Media-Center

• Windows Media Center opens but the program closes itself and offers no solution?

  Hello, I have windows vista family premium and Im trying to use my windows media center. I don't use it often, but now Im trying to add the Extender for my xbox 360. The program does not open, but then once I click on what anyone in the program or just scroll up and down he says "Media Center has had a problem, this program closes" and it offers no solution that relates to my problem. I have updated everything and even tried other solutions that were offered on this site, as the removal of the "data store file. Well, I do not have this file or can't seem to locate. Help, please!

  Try the steps in the following article.

  Article number: 916180 - you tried to configure your Xbox 360 as a Media Center Extender, but the installer is not started
  http://support.Microsoft.com/kb/916180/
   
  Thank you

• Why windows Media Center only shows the most?

  Media Center Windows used to have a lot of tv shows also present and past to watch. But I've had my computer for three months and now I see there is no TV shows more. Microsoft has abandoned this service?

  If you're referring to the internet, TV,

  Microsoft does more Internet TV in Windows Media Center of 09 20, 2012.

  It will be supported.

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/25/t/103422.aspx

• Video error - files needed to display video are not installed or not working not properly. Please restart Windows Media Center or restart the computer

  I have Vista Version 6.0.6002.18030 (vistasp2_gdr.090429 - 2357) SP2 installed during an automatic update.  This box is only used as a Media Center

  Now, I get this error when you try to watch HD programming - I get a few seconds of viewing before the image starts to freeze, the acoustic breaks then the error message.
  Recorded at stations SD I will often get towards the end of the program, and it starts too break up.
  The Analysis ToolPak that I found for the Hauppauge 500 t tuner I have reports that all networks have 70 + strength and 100% quality.
  The performance of the Task Manager tab indicates the processor cores ares works at about 25% of capacity
  I had a lot of trouble getting the Pioneer BD drive to work - it turned out to be a very minor mistake, a slider maxed out on the Graphics tab "overlay" card - but until I found this he encouraged to re - install the OS from the original DVD and the problem persists.
  The system used to work properly and there has been no hardware apart from the Pioneer BD drive changes.
  I got ffdshow installed from the beginning, so I don't think that's the problem.

  DVD read OK

  BluRay disks play back ok using the Cyberlink plug in BOF VMC

  Different types of downloaded files play OK using VLC.  So, I conclude that the (integrated) graphics (latest drivers installed) and in the rest of the material are very good.

  Looking through the forums, this seems to be an old problem, but its very curent FRO me and SUPER frustrating.

  The indices of anyone?

  Hello Clement,

  Thanks much for the reply.
  I had already downloaded the Tuner card driver on the site yesterday and installed (this is the same version I already had, but he did not seem wrong to re - install).  No change.
  I really don't understand well enough codecs!  -are you making allusion to the East no doubt not that the encoding of the input signal software cannot do its job properly?  Are the part of the tuner driver codecs? I could not see them on the website of the tuner (http://www.newmagic.com.au/Support/Hauppauge_Vista_Drivers.html)
  Can you please point me in the right direction for the codec pack (btw, I though 'codec packs' were notoriously bad news! and since I recently made a new facility would be not all right codecs be there that they must have been before when everything worked well?)
  I have a chart integrated 'card' on the ASUS P5E - VM HDMI, an Intel GMA x 3500 and here too I have the latest driver from the Intel web site.
  I think I've found the "MS decoder checkup" utility you mention (http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en).  I have a Red Cross and green ticks for different decoders but 'Microsoft MPEG-2 Video' (msmpeg2vdec.dll.) decoder is compatible with MCE, but not with MP10.  When selected "update now" button is dimmed.
  Thanks again

• In Windows Media Center, I find the names of file for photos but no pictures. I can find them in "my pictures".

  It seems other files more bleeding in the 'My pictures' folder but the pictures are not appearing in Media Center.  If I go to the start menu and click on 'Images' I'm in the photos, but still, there are many files that do not belong.  If I go directly to the "my pictures" folder everything is fine.  What did I do to cause this?  How can I solve this problem?

  Hello

  Restore to factory conditions would certainly solve the problem - there is no reason you should have to reset the bios to be able to do.

  To consider is to force Windows to re - build the library - getails of the procedure are described in method 1 below.  You must view the files system and records that you were before being able to locate these files.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/media-library-is-corrupted-on-Windows-7/2afcac17-984b-48fe-98FA-451aa5c085e6

  Kind regards

  DP - K

• Media Center Download correct the channels but totally wrong listing of programs.

  Implementation guide for Media Center on Windows 7 64 bit system. I get the right lanes, but there is no correlation between the programs and the actual programs. Can't trust record because the listed show may be a different length of time as the real.

  Please repost this in
  http://social.answers.Microsoft.com/forums/en-us/mediacenter/threads and start a
  new thread.
   
  You must include your zip code, your provider, the type of tuner you have and
  If you have a top of the page box set or cable card or?
   
  Check your time, the date, the zone settings.
   
  And please see if ads on zap2it.com are the sane as you see inside
  Media Center.
   
  Friday, October 29, 2010, 01:48:59 + 0000, ALs Media Center problem says:
   
  > Configuration guide for Media Center on Windows 7 64 bit system. I get the right lanes, but there is no correlation between the programs and the actual programs. Can't trust record because the listed show may be a different length of time as the real.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• How can I me EPG of Windows Media Center to retrieve the Info for all channels instead of a few?

  I changed recently upgraded my old outdoor antenna to something much better. As a result, I now get many more channels. Some of these channels are probably close to 100 miles away. EPG WMC not being extracted and live online in the info, I guess that it takes only few of my 'area '. This translates I only find info for strings nearest while some other display Info not available. It is of course annoying and makes doing the impossible registration application.

  I'd like to solve this problem by trying to use an EPG that will pull information from over the air signal. While I searched it online all methods that seem to work for others are for people in Europe, or even for the older versions of XP/Vista of WMC. I have Windows 7 Home.

  Hello

  I will suggest you to post your question in the community of the Windows Experts:

  http://experts.Windows.com/

  I hope that helps!

• Not show Netflix in Windows Media Center because of the N8151 error.

  NETFLIX WILL NOT MY FILM BECAUSE OF THE N8151 ERROR DISPLAY.  THANKS FOR ANY HELP THAT YOU COULD PROVIDE.

  original title: THIS IS WHO CODE the ERROR N8151 THEN HOW I fix IT?

  Hi LENEDMONDS,

  You can try to uninstall and reinstall the latest version of Silverlight and see if it helps...

  Step 1:

  We will uninstall Silverlight completely and install the latest version and check if it helps.

  Uninstall or change a program

  Step 2:

  Download and install the latest version of Silverlight, and check if it helps.

  Download Silverlight | Microsoft Silverlight

  For more information, you can also read the following article.

  Uninstall previous versions of Silverlight on Windows

  Hope this information is useful.

• Reinstallation of Windows Media Center XP error, the application failed to initialize properly (0xc000135

  I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:

  PxShare.exe Application error.

  The application failed to initialize properly (0xc000135).  Click OK to close the application.

  It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.

  I don't know if the two problems are related or not.

  Thanks for any help!

  Hi Lowery619,

  (a) If you have external devices unnecessary connected to the machine, unplug them.

  (b) thereafter, you can try reinstalling Windows XP.

  For more information, please visit this link: install, reinstall, or uninstall Windows

  Install Windows XP

  Hope the helps of information.

  Please post back and we do know.