Windows PE found RAID drive on HP EliteFolio 9470 m using SSD Cache

Similar Questions

• How to install Windows Vista on the Qosmio G35-Av600 RAID driver?

  I have Windows Vista Home Preminm upgraded Pakage. When I start the installation process, the installation program ask Toshiba Raid Driver. So I click the button to load a driver and choose the folder where the driver is located, as mentioned on the guide, but said configuration there is no driver found for this player.

  What is the reason and what is the solution?

  Hello

  Have you chosen the right RAID driver?
  It seems that this laptop Qosmio was designed for the American market and therefore, you need to download the driver to the US page:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  It is specially designed RAID driver for Vista. At that time its version 1.10.0016 .
  Please note that you will need to extract this file prior to installing the RAID driver!

• Portege M400 - RAID driver for Windows 7

  I'm doing a clean install of Windows 7 64 bit on a Toshiba Portege M400.

  I have the computer with the boot CD in, by scanning my fongerprint, press a key to start from the CD, enter the country, click on install now, accept the license, select custom installation and get an empty listview, asking me where I want to install windows.

  I insert a memory stick with drivers from the download page of Tosh (selection of laptop |) Portege | Portege M series | Portege M400 (3G) | PPM41E | Windows XP Tablet Edition | RAID driver, which seems to accurately describe my machine), but the installer just give you the message: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.

  Can someone point me in the right direction please?

  A.

  Hello!

  Drivers Windows XP don t work on Windows 7's the reason why you can t install Windows 7 successfully.

  You should try it with Vista driver again. The Vista drivers are also work on Windows 7. I think that's all you can do at the moment.

  Good luck! :)

• Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition

  I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDU
  Who knows where to find the RAID driver to load when you start the installation of xp?

  This model no longer appears in the driver download section.

  Of course, it is listed by download, but the older models are listed in the ARCHIVES.

  Please visit the download page for Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp - once again and the slot type of product choose Archive.

  For Windows XP Home edition, you will find RAID driver for download.
  Can find you it?

• Qosmio G30-175 - where to find RAID driver for Windows 7?

  I have a Toshiba Qosmio G30-175 and I need raid driver so I can install Windows 7. My operating system is XP and on Toshiba-home page, I can't find the driver.
  Can Enyboby please?

  Kenneth

  Hello!

  Have you ever tried the Vista driver? If this isn't the case, you need to test, because most of the Vista drivers are also work on Windows 7.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope it will work for you, but you can give us feedback on this subject. I think it could be interesting to other people, too. ;)

  Good bye

• Windows 7 can't detect the TOSHIBA Portege M400 RAID driver

  I put to level my M400 tablet from Windows XP to Windows 7.

  Questions of compatibility check out, all right. In research I realized I needed to upgrade the RAID driver to a version of Win7. So I downloaded which, from my external hard drive to install to Win7, and installing Win7 can't find it. I tried the same thing with a variant of Vista with no luck. Even through the installation on the hard drive itself, nothing happened. Impossible to get in the tio silent run command prompt, absolutely nothing. I'm back where I throw this computer out of my 4th story window.

  Any help please?

  Hello

  Where did you download the RAID driver?
  Please try to download the RAID driver on the Toshiba site directly. These drivers are pre-tested and should work on your laptop too.

  The older Portege M400 taken Windows 7 isn't supported so in the worst case, you can t use it.
  But normally the drivers should work on Vista so make sure you are using the correct driver.

• Portege M400: Installtion Windows - cannot install the RAID driver

  Hello world
  I installed my original form of the system DVD Toshiba (60 GB partition).
  So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
  There is also no results:
  -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
  -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
  Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
  .. Sorry for my poor English :)...

  Hello

  After installing the driver RAID you should not make any partition or format the HARD drive.
  If you do this, the RAID driver is deleted and you will get an error.

  So do all the changes on the HARD disk before you install the RAID driver.

• Pavilion Elite m9500z raid driver windows 7

  I upgraded my Pavillion Elete m9500z to windows 7. Worked very well. Update of Windows has loaded a new driver for the video card. The pilot hangs the system, the blue screen. I tried to go back to the previous driver and the system still crashes. I tried a system restore point with no luck. Finally, I tried starting problems resolution and makes things worse. System boots to the point just before the login screen. Remains black with the cursor, even in safe mode.

  At this point, I amtrying to fix the installation with the windows installation disc. The problem is that the boot drive is a raid drive. The installation disc can not see the drive without the driver. HP drivers are exe only files not the driver files. Motherboard MSI website has no drivers because the jury is the property of HP.

  I need the drivers in a format that windows will recognize or a method of extracting files from the installer of HP.

  Yet once it shouldn't be this difficult.

  Help, please

  These drivers failed with the same error. Finally, I converted the RAID drives to AHIC and they have been recognized by windows. The problem with the system was caused by the video card. Windows was unable to complete the repair process and the system is in place again.

  Thanks for your help.

• How upgrade to Windows 8 RT979UT - need RAID driver

  I want to spend my RT979UT to Windows 8 and keep the motherboard SATA configured in RAID. The installer of windows 8 reports that I need a driver (I think it says expressly "media driver"), at least I have change the BIOS setting to one of the IDE options (I think they were native and emulated?).

  Given that this system has the chipset AMD Radeon Xpress 1150, I tried the drivers on site AMD, more specifically the files that I unpacked of 12-10_vista_win7_win8_32 - 64_raid.exe on another system, but while the driver seemed to match, Setup was not convinced, always complaining that he was missing one or more drivers.

  I have update the latest version of the BIOS from the HP website.

  Because I was able to do an install when I changed the setting in the BIOS for an option to IDE, I think that the missing driver (s) is/is specifically RAID driver.  With this successful installation, I installed the AMD/Catalyst drivers as appropriate (I think that Device Manager showed that all devices are properly recognized), then changed the BIOS setting to RAID, but Windows wouldn't boot.

  Would I be able to find a driver that will allow me to level to Windows 8 with the Radeon Xpress 1150 configured in RAID?

  \c

  Hello:

  I would try the Vista driver of support for your PC and driver page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3253421&prodNameId=3253423&swEnvOID=2103&swLang=13&mode=2&taskId=135&swItem=vc-75484-1

  In addition, I do not understand why you change just the emulation of SATA in RAID in BIOS (Storage Options > Emulation SATA) and install W8.

  The Guide to install it on the link below, page 5.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00765938/c00765938.PDF

  The RAID driver should be included in the W8 installation media driver database already, I think that woulld. It is in the drive of W7.

  Thus, if for some reason W8 asks a driver, use the facility advanced, have the driver above extracted with No folder and copied to a USB flash drive, then select the RAID driver when you see listed flash player files.

  Make sure that you simply copy the 32-bit or 64-bit files according to the case, so there is no confusion.

  Paul

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.

• Qosmio G30-145: WinXP and RAID driver - no response

  I did everything that is needed for the installation of windows xp for Qosmio G30-145.

  Installation process is as a result: as in http://support.toshiba-tro.de/kb0/TSB56012H0001R01.htm and that worked, but during the installation of windows has started, you will be asked once more (first time I did format and second time that I did ' t format HARD drive): "INSERT THE DISK LABELLED"TOSHIBA RAID DRIVER"in the A: drive... "Press on enter when ready '- but no reaction... SOLUTION!

  Thanks in advance.

  Hello

  According to the Toshiba page suggested when installing Windows using to partition or format the HARD drive, the RAID driver is deleted in the process. This causes the shot the next time that the machine start-up.
  To avoid this, perform a partitioning and formatting before you run the manual installation of Windows.
  This behavior is not displayed during the installation of Windows XP with SP2 integrated

  Well, perhaps, you need a CD OS Win SP2 integrated?

  But why you do not use the recovery CD Toshiba delivered?
  On this CD, all drivers are preinstalled and you only need to install the OS from the recovery CD. All should work properly.

  PS: Just for the record: in the BIOS, you should find an option to disable (or change) the RAID.

• SSD upgrade failed - not found boot drive

  I need your help guys... I've been everywhere on the net, try different methods to clone my Windows 7 for SSD and failed repeatedly.

  Here is my setup, I have a HP Envy 14 with a 500 GB HARD drive. I bought an SSD to speed things up.  I have 2 OS (dual boot),

  Win7 and win 8, on which Win8 is the default operating system (according to the news of easyBCD).   I just want to clone the Win7 OS part.

  (Win7 - C drive), (Win8 - F drive) and recovery on the D drive.

  I tried these t hings upafter the defragmentation and backup)

  1. While on Win7, I created a copy of the image, but strangely, thought, once the process is complete the copy of the image is Win8

  I've used EaseUs to do backup and clone Drive C

  Swapped with the SSD HARD drive and got a message could not find a boot disk

  2. because I failed on the first try, I formatted the SSD and opt instead for a new installation.

  -J' I downloaded the ISO of Win7, swapped the (empty) SSD newly formatted

  -Started on the Win7 Installer, and have the operating system installed on the SSD.

  -J' thought that I was until I noticed assigned HP keys do not work, the USB drivers do not work, I could not turn on/off wifi. The reason may be the missing drivers (bloatware since the HP recovery disk - given that I didn't copy that one)

  3. after the attempts, I formatted the SSD drive. I read somewhere to use the HP recovery instead.

  -J' cloned the disc to my HDD to the SSD HP recovery

  -Swapped with the SSD HARD drive

  -Started my laptop and not found boot drive... (even after pressing F11)

  can you tell me a better way to do it?   Or if someone could point out what I did wrong, or perhaps missed?  Really appreaciate... This was bugs me for the last days...

  Hello wawipack,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that you're having trouble to locate the boot device. I'll do what I can to help you! To start, make sure that you have tried all the steps in this document from HP: Solve Boot Device Error Message not

  If this does not help, I suggest to do a reinstall of HP standard on the SSD. Once done, do a restore to a previous image in the OS Windows, is not using any bootable media.

  These steps should help get back you on track. Please provide your results. Thanks for choosing the HP Forums. Have a great day!

  Mario

• Satellite P200-1JY - Windows mass storage controller driver 7

  Hello
  I own a P200-1JY PSPB6E, and I installed Windows 7. One device no driver found, is the "mass storage controller" and I havn't found this driver...
  Am I the only one having this problem?
  Kind regards.

  Hello

  You are not alone.
  I aso had this on a P500 when you perform a clean install of Win7.

  Go to the Toshiba website for your area and download the Toshiba Win7 drivers for the driver problem, you... P200 I found here - http://support.toshiba-tie.co.jp/windows7/download/Satellite_P200_32_au.htm

  There is a storage config atch here as well I think solved my problem in a few weeks ago...

  Windows7

  Pilot

  PatchFiles (TOSHIBA Storage Configuration Patch for Windows7)

  BR /.
  Rob

• Question about the V1.3.8.0 Raid driver update

  Hello.
  Can someone tell me what are the advantages of doing an update of the RAID Toshiba Windows XP MCE 1.3.8.0 driver or what case?

  Also had another problem... I tried to install the driver for interim relief and he made a mistake... my version of raid is always the one I had before and couldn t install this version.
  Any help would be cool.
  Thank you

  As far as I know the RAID driver must be installed at the begging of the installation of the OS.
  Unfortunately there is no any official documents about the correctional system and the benefits of updates.
  But I think that the new driver could be compatible with more motherboards and controller.

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .