Windows photo password does not work

Similar Questions

• Dose of Windows Photo Viewer does not work! Why?

  My local disk C: / was full, so I moved my default folder for programs install on my E: /. Then the folder of the Windows Photo Viewer and others have been moved automatically to the new folder. And now my windows photo viewer will not work. I don't know exactly when he stopped work because I don't use very often, but it's after I've changed the default folder. Now of poliovirus Sauvage just dose not load. I opened image, it loads and dose not open anything.  I have install Picasa because I thought that I can't use the wild poliovirus. But the dose of Picasa is not working too. It makes a black image and a unknown title. Is there a way to fix this without a computer preinstallation mt. Thank you. I'm really sory for mistakes and the gramer, but I'm not talking about English country.

  Hello

  How have you changed to E:\ program files folder location?

  Microsoft does not support changing the location of the Program Files folder by modifying the ProgramFilesDir registry value

  Reference: http://support.microsoft.com/kb/933700

  Note: The link above applies to Windows 7.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope the above information is helpful.

• Windows Photo Viewer does not work when photo is clicked on

  When I click on the individual image in the folder, the first message received error is 'there was a problem starting D:\Program Files\Windows Photo Viewer\PhotoViewer.dll. The specified module could not be found.

  Windows 7 is installed in C:\ and D:\had the old XP Professional which I've updated.

  Slide show does not work either.

  However, I can say 'Open with' and select the Windows Photo Viewer to view the photo. Photos of the record may be consulted by clicking on 'Next' and 'Previous', but not when you click on individually

  Any help is appreciated.

  Best,

  Mahesh

  Syed,

  Thanks for the reply. I had to reinstall Windows 7 on my machine. It corrects the problem.

  However, it caused another :). Now my camera Canon A710IS unrecognized despite getting all the latest updates. Any help will be appreciated.

  Thank you

  Mahesh

• Connect you to windows 7 password does not work and no disk password does!

  I had the same password for years.  I've never had a problem.  All of a sudden my password no longer works.  Help!  I have no disk password.  Don't know.  I have no recovery disk.  Do not no more.  I only RESTORE which I want to use.
  Can someone help me please?

  Can you think of anything else I should do to prepare in case something goes wrong with the computer.  I have the recovery CD I created them when I got the laptop.

  Can of course! Those of us who prefer do not re-install Windows from scratch in case something does not take the following measures:

  1. Burn a CD to repair Windows via Control Panel / backup and restore.
  2. Connect an external hard drive in a USB enclosure.
  3. Create an image of the drive system via the control panel / backup and restore. Store it on the external drive.
  4. Use the repair Windows CD to start the machine in Repair Mode.
  5. Check if the image in step 3.
  6. Update the image to twice a year.
  7. Use the USB drive to your regular backups.
  8. Keep the USB drive, far away from your PC for most of the time.

• Delete on Windows Photo Gallery does not work. Is thre a way to restore it?

  I have the Windows Vista system.

  When I try to delete an individual highlight or a group of photos and clicking on 'Remove', the entire page freezes outside the circular slider, which continues indefinitely.  There is no escape aprt to unplug the computer's power supply.  Is there a simple way to restore the installation to remove?

  Hi Tim,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) other Windows Photo Gallery features work very well as expected?

  Method 1: Run the fixit available in the link below and then check if it makes a difference

  Windows Photo and slideshow problems

  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows Photo Gallery does not work on Windows Vista

  How can I reconect my Windows Photo Gallery?  It has stopped working.

  Error message, or anything that happens when you start the program?

  Have you tried the system restore back to before it stopped working?  The System File Checker is the market too.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  See if another program is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  It is if you create another user and test with it?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Administrator Bios password does not work on HP 4420 s XT940UT #ABA Windows 7 64-bit

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits I suppose initially that he came with? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Once you open a session with the service the customer of HP one case of pension, they will provide once the utility you and steps to execute it. who can capture the UUID. BTW - UUID is a unique ID for each machine (16 digits or more) stored in the BIOS itself.

  Once the results of the utility (UUID and other info) in the log file, shared with HP, they can generate a key file (SMC) to reset.

  Well, depertment of technical support can help you in it, no need to ask for anyone in particular or the Department.

  It will be useful.

• my password does not work on windows vista. I get the message user profile service has no logon

  My password does not work. I get the message user profile service has no logon. Help please.

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• One of my ID Windows Live ID does not work

  One of my ID Windows Live ID does not work, I can't reset the password (I get an error), I can not connect with her online (I get an error).

  When I get the Live ID to submit a case on the support of Live ID site I get an error.  To clarify, errors are associated with the Live ID and come from Microsoft, it is not my PC that produces errors.

  I tried calling and e-mailing for the support to unsuccessfully (was returned to the site, which generates an error when I enter this Live ID, which means that I have no way to submit this problem in the right group - Live ID team)... What can I do to fix this problem?

  Hello

  The question you have posted is related to windows live ID and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=10

• Need help my e-mal cases. reset password does not work.

  How can I case my email I tried to reset password does not work. I forgot my password and it is entered repeatedly. I want to be to my e-mail or deleate my account. Help, please.

  Hello

  Is Hotmail or Windows Live Mail email? If this is not the case, contact the mail provider.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  ------------------------------------------------

  Windows LiveMail has its own Forums, so you can ask your questions there.

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.

• WRT160N... password does not work to get back in line to restore settings after update firmware.

  The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected.  I was hoping that would solve the problem.

  Failed to connect to router just after the firmware has been updated successfully (what said on the screen), but could not use "continue" to to precede.

  Because the screen indicates the success, I closed the browser and reset the default router.

  The next step in the process is to access the configuration page of the router web-based and restore my settings.

  The PROBLEM... Now my password does not work to allow me access to the page of the router's web-based Setup to restore the settings.

  I have an account, but nowhere in the account he mentions the password settings.

  When you reset the default router, the router returns to a cache of user name and a password of 'admin' (without the quotes).  Please try to connect to your router.

  If you continue to have problems, then you must try to reset the router by default.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• my password does not work, but I could connect before

  my password does not work but I could connect once before, when I tried to create a password reset disk i cant.im using the account invited now and don't have any other administrator account with the paswords working or I know.

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Somehow my diary of the administrator password does not work, no disc reset

  original title: locked out! Help, please

  Somehow my diary of the administrator password does not work. I tried everyting. I use Windows Vista.

  I continue to be asked to provide a 'A' floppy to recover my password, but there is no floppy drive on my computer.  I have not configured a retreival diskette.

  I am not able to access all the programs that I installed as an administrator through the comments log in.

  I tried to re - install the complete operating system after no longer being able to access my programs and I am not allowed to do it either.

  I'm at my wit's end! Can someone please?

  Thank you

  Completely lost in cyber space.

  Hello AdrianaMonti,

  I'm sorry but the Microsoft forum rules do not help users circumvent passwords of Windows OS or software systems.

  I do not understand why you have problems with re-setup because it has nothing to do with your original administrator password. Your copy of Windows came pre-installed on your PC or did you buy a boxed copy and install it yourself?

  If you are unable to re - install probably you get error messages. What these error messages?

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.