Windows Recovery 10 drive

Similar Questions

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows recovery can recover files that have been moved from the computer to an external hard drive?

  A month ago, I moved my photos from my laptop on my external hard drive. The hard drive has stopped working some time later, so I lost some valuable files. Windows recovery retrieves these photos lost?

  Hello

  If the drive hard failed and no longer spin, contact a data recovery specialist

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• Sleekbook 15b032el: how to make a recovery USB drive right the first time

  Hello. I just got a 15b032el running Windows 8 Sleekbook. I am in a process of making a recovery USB drive and I want to just do it right the first time. I understand that it is only possible at the same time. I was wondering how many gigabytes of capacity must have the USB key. Anyone of you who knows? Thank you. Rgds.

  Hello

  The USB Flash drive is 32 GB - for a complete description of the process of creating a recovery Image on a USB Flash drive, see the following HP document.

  Creating recovery media - Windows 8.

  Kind regards

  DP - K

• I don't have windows recovery, how do I get it?

  Original title: my komputer.

  I don't have windows recovery, how do I get it? my computer is ACER Aspire 6920, thank you,

  Hello

  Here are the different ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If you have never received a recovery to buying disk, you won't be hace a recovery Partition

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have a computer with Windows Vista business on her key. I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Activation of WINDOWS VISTA oem with another oem drive?

  HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?

  Hello

  A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.

  Here is the link to order the Acer recovery disks:

  http://us-store.Acer.com/RCD/

  And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.

  With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.

  See you soon.

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 10 Windows recovery media does not work on 3020MT tour

  I have a number of systems with lower upgrade Windows 7 installed by default. So I changed the firmware in the UEFI as shown:

  

  I then started the UEFI boot option dvd DVD, and then try again to install the OS, but don't have the option, I also checked the following article:

  

  but I don't get the option to install as per step 13, instead I get options for recovery / repair, same as you would get when running a recovery disk.

  I tried the firmware with or without Secure Boot enabled, that does not make a difference, I also tried to create a USB of UEFI since the DVD and use that same result.

  Finally if I go into advanced options, I choose the built in option to 'Recover' the OS from the disk, the problem with this is that it installed a clean install of Windows 10, no driver, no specific settings for Dell, no trial Office not installed that I simply want to activate.

  Thought I would try the forums before you call technical support Dell Monday.

  Any ideas?

  I would say that skip Dell support and use the installer of Microsoft...

  • No driver, but the few who are likely to be installed are fairly easy to install.
  • No Dell-specific tweaks not - other than Dell branding (which I doubt there is someone who would "want" that precisely), I'm not sure what you're talking about.
  • The trial is just the apps with installed free version Click-to-Run application - when you "activate" Office through Click-to-Run with an existing key, the files for the version that you select are downloaded from the web anyway, so there is really no reason to leave who oppose you.

  https://www.Microsoft.com/en-us/software-download/Windows10/

• 09.0 "NVIDIA Windows Kernel Mode Driver display driver, Version 209.01 unresponsive and has successfully recovered".

  "NVIDIA Windows Kernel Mode Driver display driver, Version 260.99 stopped responding and has successfully recovered." My screen, hang up, then flashes, then turns off, then comes back on, the same month so much MORE Simple ERROR CODE? How do I stop this? With a SIMPLE ANSWER! (BUY A MAC)

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Insert the Windows recovery or installation media to continue - Windows 8

  I tried to reset my Windows 8 Asus SonicMaster S300c for a few days. It was installed with a Windows 8 operating system and had been upgraded to Windows 8. 1. I tried to use the update, reset and various other techniques found on the web that offers workarounds for this situation.

  Having none of them does not work for me, I created an image of USB flash drive recovery, entered the box boot UEFI and loaded the prompt orders and formatted the disk C: (OS disk).  I do not touch or change hidden partitions.

  However, now that I'm booting from the disc Sandisk UEFI (my USB key), I get to the window 'Reset your PC' where he tells me to "insert the installer or Windows recovery media to continue.  Of course, I have my recovery media inserted, the system can choose from two places, the hidden or the USB drive.

  I tried to restore the USB key and the hidden partition and none worked.  What can I do to retrieve Windows 8/8.1 on my computer.  (And it is possible to install Windows 10 on this laptop?)

  I finally solve my problem.  I had to use a combination of various pages and links and articles help to help me sort.  Ranging from the Dism to using CDBurnerXP and RUFUS DiskPart.

  I wrote my experience with, hopefully sufficient instructions for a person to get there installed system.

  http://www.eightforums.com/installation-setup/72015-Windows-8-installation-various-errors.html#post529594

• Blue screen in Windows 8. Driver IRQL not less or equal

  Separated from this thread.

  I get this when I try to connect to my Wi - Fi. I connect via WPS because does not have the security key password, and that of my ISP gave me is wrong. WPS is my only way to connect to wireless internet. When I hit the WPS button on my router and the laptop trying to connect is when I get the following message appears on the blue screen: driver - IRQL not less or equal - rtwlane.sys. In trying to detect Internet connection problems, it says reset Realtek PCIe FE Family Controller. Is it a hardware problem or software?

  It seems to be a driver problem. I'll give a few broad tips here, without the dump files. Before performing the procedure below, please find the latest driver for your device from the manufacturer's website, or go to the website of the manufacturer of your PC and find the right driver from their support site. When you find the driver, download and save to your desktop, you will install it later in the procedure.

  1 shift-click on any button to restart to boot into the Windows recovery environment

  2. When you arrive at a blue screen with three options, go to Troubleshooting > Advanced Options > startup parameters

  3. press the button restart when you get to the final screen, and when the PC restarts, click on Safe Mode

  4 when your PC starts in safe mode, open the Device Manager by using the Windows key + X keyboard combo and then select Device Manager from the menu

  5. find your network adapter in the list of devices. Right click and select Uninstall. If there is a check box for uninstalling the driver as well, check, and then uninstall the device.

  6 restart your PC, and when you're as a normal installation, the driver for the device you uninstalled.

• Bootcamp error: "the startup disk cannot be partitioned or restored to a single partition" and Windows recovery partitions

  I have Setup with Bootcamp Windows 8 and then upgrade to Windows 8.1, and then upgrade to Windows 10.

  When I want to restart the training camp that I got the error message: "the startup disk cannot be partitioned or restored to a single partition.

  According to this page, it is because of Windows recovery partitions added during the 8 to 8.1 migration and 8.1 to 10.

  I check with diskutil and I found 2 partitions of Windows Recovery:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 419,4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 79.1 GB disk0s4

  5: Windows Recovery 471.9 MB disk0s5

  6: Windows Recovery 472,9 MB disk0s6

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 419,0 disk1

  Logical volume on disk0s2

  C961E459-1E0D-4060-A467-3B4A705264AA

  Unencrypted

  I tried to delete the Windows Recovery 2 partitions with disk utility tools but the button "-" to remove them were leaving is disabled.

  Is it a good idea to remove these partitions? If yes how?

  1. What is the year/model of your Mac?

  2. you are trying to install a new copy of the W10 or remove the existing installation?

  3. do you have the W8 or installation/upgrade W8.1 had problems before the upgrade of the W10?

• Re: Windows Recovery icon disappeared

  Dear all,

  My pc (satellite A100) was giving me problems after a virus infection. I decided to reinstall the OS, but the recovery 1 DVD is damaged. I tried to create new disks, but Windows recovery DVD icon disappeared.
  Could someone give me the route and the name of the exe so I can try to run it manually?
  Thanks in advance for your help.

  Hello

  > Could someone give me the route and the name of the exe so I can try to run it manually?

  It's called Toshiba Recovery Media Creator