Windows resource protection unable to fix corrupted files

Similar Questions

• SFC - Windows Resource Protection found corrupt file but was unable to fix some of them. (Windows 8)

  I ran SFC/scannnow in the command prompt (Admin)
  Here is the full Error Message:
  Windows resource protection found corrupt files but was unable to solve some of them.  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log.  Note that logging is not currently supported in offline maintenance scenarios.
  I saved the CBS file on my desktop and am able to view the log, but am unable to make sense.  Is it possible that I can get someone to look at and possibly help solve the problem?
  My computer is running slowly.  75% of the time to reboot or turn off completely and turn on my computer, the screen goes black and won't let me log on.
  If there is none I could provide more information, or if there is a way to download the CBS in order to watch it please let me know.
  I appreciate any help!
  AJFloat

  JSF

  First thing that you must run DISM instructions that are at the end of this wiki SFC

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/system-file-check-SFC-scan-and-repair-system-files/bc609315-da1f-4775-812C-695b60477a93

• Windows resource protection found corrupt files but was unable to fix some of them.

  I ran sfc/scannow and got the error "windows resource protection found corrupt files, but could not solve some of them.

  I watched the CBS.log file but there is a ton of stuff in there that I don't understand. A post that looks like a problem is ' 2013-08-07 16:30:17, Info CSI 00000307 [SR] cannot repair the military record [l:34 {17}] "SearchIndexer.exe ' of WindowsSearchEngine, Version = 7.0.7601.17610, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, neutral public key in the store, file is missing
  2013-08-07 16:30:17, info CSI 00000308 [SR] cannot repair the military record [l:34 {17}] "SearchIndexer.exe" WindowsSearchEngine, Version = 7.0.7601.17610, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "
  When I try Startup Repair he doesn't find anything.
  I can post the entire file if someone can tell me where to post.
  Thank you
  Tom

  Thank you

  I had already found this solution by a search on Google and started the update via the downloaded/burn ISO disk. It worked. My problem is now solved so that I get now a clean "sfc/scannow".

• I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  Hello

  This should help you.

  You need to run as admin.

  "How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"

  http://support.Microsoft.com/kb/928228

  And if the problems cannot be fixed, you may need to do a repair upgrade installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Outlook and printers do not work and SFC error Windows Resource Protection found corrupt files but was unable to solve some of them.

  Separated from this thread.

  SFC all said above.

  Windows resource protection found corrupt files but was unable to solve some
  of them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.

  I was hoping that fixing the above might fix below.

  I had 2 problems.

  In outlook I have about 300 deleted messages from the deleted folder and when I entered the box and they were all there. I did it again and it happened again. Finally I did drag the files to the junk e-mail folder and not empty and they were gone and he seems to have stopped.

  The other problem is with the printer profiles. I changed routers and had to reinstall the printers.

  They appear ok in devices and printers, but when I go to print all old printers appear. They are not in the Control Panel, just new, but the drop down menu select printer boxes have many printers that are not active or working more. I would like to get rid of them.

  Thank you

  Harv

  SFC checks really just a list of some of the most important files (such as those required in order to activate the system at a very basic level), and generally what he is going to fix all that is at a "higher level." And Yes, it will almost always find one or two tiny little things but they are not significant failures, just a file with a version number of new or more than what's in the list.  Unless there is a symptom of a problem, probably best simply to ignore it.

  Just follow best practices: do not run as administrator for daily use, maintain and keep a backup (use a simple as automatic backup, Carbonite or store your files in OneDrive).

• Windows resource protection found corrupt files but was unable to solve some of them.

  I have several problems with my computer; I used to have Skype and I bought a new logitech camera, but since I installed it I can't update of java, adobe, yahoo, etc. so I uninstall my camera to see if it was the problem, but since I did that Skype has not worked agaain, an apears to error saying that there is a problem with the package windows install , I have read in this forum and find I had need windows install clean up utility so I downloaded, but did not work, when I used comand promp and scan my computer this apears

  Windows resource protection found corrupt files but was unable to solve some of them. Details can be found in CBS. Journal windir\logs\CBS\CBS.log. for example, C:\windows\Logs\CBS\CBS. Journal

  C:\windows\sistem 32 >

  can someone help me please! Thank you.

  HI Margaret,

  Thank you for your message.

  Looks like you have a virus or malware causing corruption.

  I suggest to update your Kaspersky Anti-virus definitions and run a full scan of the system.

  Also, make sure here's you have the Vista disc in the drive when you run SFC, where it gets the correct file information.

  Alternatively, you can try to perform a clean boot before you attempt to run SFC, to see if a startup program may conflict with it:

  http://support.Microsoft.com/kb/929135

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 2738 - Windows Resource Protection found corrupt files

  original title: error 2738

  Windows resource protection found corrupt files but was unable to solve some of them.  Details are provided in convertible bonds. Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log

  Hello

  see if that helps

  Here's how to use the SFC command

  the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  How to analyze the log file, SFC.exe program generates the log file display

  The program SFC.exe writes the details of each operation audit and each repair operation in the CBS.log file. Each SFC.exe program entry in this file has a [SR] tag. The CBS.log file is located in % windir%\Logs\CBS.

  Note The Windows Modules Installer service written also in this log file. (The Windows Modules Installer service installs optional features, service packs and updates).

  You can search for tags [SR] help locate SFC.exe program entries. For this type of research and to redirect the results to a text file, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     type cmd in the Search box, right-click cmd in the programs list, and then click run as administrator.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Type the following command and press ENTER:
     findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  If SFC detect major problems, you may need to do a repair installation

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• sfc scannow windows resource protection found corrupt files but was not able to repair

  Original title: sfc/scannow

  Hello.

  I tried to repair internet explore in windows vista with the command prompt

  I've done sfc /scannnow and it gave me

  Windows resource protection found corrupt files, but could not too distressed some of them

  details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper

  for example c:\windows\logs\cbs\cbs.log

  I found them the corrupted files, but I have no idea on how to fix or remove.

  UH how to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  don't tell me no how to fix or remove.

  I have windows vista edition Home premium 64-bit service pack 2.

  Hey Crystal

  If they are difficult to pierce the CD to Windows Media Player 11 try these links below it should help them or at least show them in the right direction on how to burn a CD. Hope that helps some.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• How can I remove the rest of the damaged files that Windows Resource Protection could not?

  How can I remove the rest of my corrupted files that Windows Resource Protection did not delete?  It offers no suggestions?  If he deleted some, why can't this?    I did the scan twice, but it says this... CBS. Newspaper windir/Logs/CBS/CBS.log for more details... I don't know how to access, also said the damaged drive was C / windows / System 32/config/software/log is corrupted and unreadable.  Hope that there is a way to solve this problem... Thank you

  Hello

  Try the following and see if it helps.

  I suggest you perform a disk check and check if it helps.

  See the following steps:

  a. open the computer by clicking the Start button, click computer.

  b. click the drive you want to check, and then click Properties.

  c. click on the Tools tab and then, under error-checking, click Find now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. to automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  e. to carry out a thorough, check select search for and attempt recovery of bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  f. to check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  g. click on start.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: Make sure also that you have disconnected all external devices except the keyboard and mouse.

  Note: If you are always faced with the question then I suggest you to upgrade on the spot and check if it helps.

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099
  Note: Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• Unable to repair corrupt files...

  I now have 3 PCs that SFC found corrupt files and that he is unable to remedy. All this seems to coincide with the Windows updates a few months ago. Someone else has the same problem? Does anyone have a solution?

  As you guessed, it is almost certainly updated related and seems to have been largely caused by updates about moving to Windows 10 of smoothing. There has been several discussions on this problem of SFC in the Windows Update forum and you will find a lot more on this subject here, but the thread below might be of interest - I will detail how I solved this on my two laptops of W7 * (a Dell - one HP) but there seems to have been various corrections for different users. (* May 20 of my post on page 6)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SFC-cannot-fix-corrupted-files-in-Windows-7/f798f377-126C-47ff-Bb16-ef5e0dddb5be

  Updates of June will be available in the coming days and it may be a few bugs (or not!)

  See what happens after the new updates and then if you're still worried, perhaps re-post in the forum updated. Best-Ric.

• Sfc/scannow error: Windows Resource Protection could not perform requested operation

  Hello

  I'm having a problem. All of my windows files are corrupted. When I changed the theme, it's always the basic theme of load. I don't know why. Maybe it's because I never have it patched with Universal Theme Patcher. I know that this will change the windows file, and windows he refused. I'm sorry windows.
  So I want to make a repair. I ran everything. When I ran the system restore, it is said that the antivirus blocked the system restore. I have search on this site, but there is no help. I take the Startup Repair, nothing changes. So my last hope is run cmd and type sfc/scannow.
  And then cmd stop the scan and says Windows Resource Protection could not perform requested operation. I'm looking for help on this site, I have nothing. I did not help
  Please help me. I don't want to reinstall my Windows. Any ideas are welcome. But when no one can help me, what should do?

  Hello

  Method 1:

  a. Click Start, type services.msc in the start search bar and press ENTER.
  b. Locate the Volume Shadow Copy service.
  c. click cliché instant volume, then select restart.
  d. now make a right-click Volume shadow copy, and then select Properties.
  e., under Startup type, select automatic.

   

  Method 2:

  Check your hard drive for errors.

  Follow the below mentioned article:
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• breach of integrity of Windows resource protection

  I ran an analysis of System File Checker and the results provided the following error message: "windows resource protection found integrity violations.  I see the cbs log but can not find the problem.  Any ideas before I have to reimage the machine.

  Hello

  For a better understanding of the issue, I would need more information on your side.

  1. what exactly is the problem that you are experiencing on the computer, whereby you run SFC scan?

  2. did you of recent changes on the computer before this problem?

  To see what files are system are causing the problem, I suggest you to refer the steps in the sections 'How to view the details of the System File Checker process' and ' how replace manually a file system damaged by a known good copy of the file.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us#manually repair

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.