Windows Server 2008 R2 (Agent Hyperic 4.4.0 - EE)
I have a platform of Windows Server 2008 R2 using the 4.4.0 - EE Hyperic Agent Windows which never ceases to appear in the portlet of self-discovery, asserting that the value of the IP has changed. All of the intellectual property has not changed on this box.Has anyone else had compatibility issues with running the agent 4.4.0 - EE on a Windows 2008 R2 Platform?
Yes, it is a known problem. It is attached to 4.5.1.
Tags: VMware
Similar Questions
-
NAC for Windows Server 2008 agent
Dear all,
I am installing NAC version 4.9.0.51 agent on a windows server 2008 (64-bit), but he said that the file invalid so I could you please guide me which NAC agent version should use? or it is not supported on a windows server 2008?
Thank you best regards &,.
Guelma
Kindly review the link below:
http://www.Cisco.com/en/us/docs/security/NAC/appliance/Release_notes/49/49rn.html#wp39714
-
12 c OEM agent installed on windows server 2008
Server 2008 Windows
12 c OEM 12.1.0.1.0 agent
Hello
I'm trying to do a silent install of the agent OEM12c on windows server 2008. I'm following the Advanced installation guide, but the error.
Here are the steps I took:
The OEM 12 c host server:
E:\oracle\app\oms\oms\BIN\emcli connection - username = sysman-password = passwd123
E:\oracle\app\oms\oms\BIN\emcli sync
E:\oracle\app\oms\oms\BIN\emcli get_supported_platforms
E:\oracle\app\oms\oms\BIN\emcli get_agentimage-destination = E:\temp-platform = "Microsoft Windows x 64 (64-bit)" - version = 12.1.0.1.0
Copied to the agent at the destination host software
Add to the agent.rsp
OMS_HOST = abc1236.xxx.Corp
EM_UPLOAD_PORT = 4899
AGENT_REGISTRATION_PASSWORD = passwd123
AGENT_INSTANCE_HOME = "C:/oracle.
AGENT_PORT =
b_startAgent = true
ORACLE_HOSTNAME = xxx. Corp
s_agentHomeName = agent12gR1
C:\Users\sadmin >C:\software\12.1.0.1.0_AgentCore_233\agentDeploy.bat AGENT_BASE_DIR = C: / oracle RESPONSE_FILE=C:\software\12.1.0.1.0_AgentCore_233
C:\software\12.1.0.1.0_AgentCore_233
Present the work directory:C:\software\12.1.0.1.0_AgentCore_233
Directory of archives location:C:\software\12.1.0.1.0_AgentCore_233
AGENT_BASE_DIR
AGENT_BASE_DIR
C:/oracle
Agent base directory: C: / oracle
C:/oracle
RESPONSE_FILE
C:\software\12.1.0.1.0_AgentCore_233
Agent base directory: C: / oracle
Home of the WHO:
Agent image loc: "C:\software\12.1.0.1.0_AgentCore_233."
Invalid switch - "oracle\tmp.txt".
Configonlyfalse C:/oracle
The properties file reading: C:\software\12.1.0.1.0_AgentCore_233"\agentimage.properties «»
1 file (s) copied.
It's the 12.1.0.1.0 version
This is the heart of type
This is the ID of aru 233
«Validate the OMS_HOST & EM_UPLOAD_PORT»
'C:/oracle\core\12.1.0.1.0 '.
The syntax of the command is incorrect.
«Executing command: C:/oracle\core\12.1.0.1.0\jdk\bin\java - classpath C:/oracle\core\12.1.0.1.0\jlib\agentInstaller.jar:C:/oracle\core\12.1.0.1.»
0\oui\jlib\OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller C:/oracle\core\12.1.0.1.0 "C:\software\12.1.0.1.0_AgentCore_233" C:/orac
the - prereq.
java.io.FileNotFoundException: C:\software\12.1.0.1.0_AgentCore_233 (access is denied)
at java.io.FileInputStream.open (Native Method)
at java.io.FileInputStream. < init > (FileInputStream.java:106)
at java.io.FileInputStream. < init > (FileInputStream.java:66)
at oracle.sysman.agent.installer.AgentInstaller.main(AgentInstaller.java:147)
java.io.FileNotFoundException: C:\software\12.1.0.1.0_AgentCore_233 (access is denied)
at java.io.FileInputStream.open (Native Method)
at java.io.FileInputStream. < init > (FileInputStream.java:106)
at java.io.FileInputStream. < init > (FileInputStream.java:66)
at oracle.sysman.agent.installer.AgentInstaller.main(AgentInstaller.java:147)
java.io.FileNotFoundException: C:\software\12.1.0.1.0_AgentCore_233 (access is denied)
at java.io.FileInputStream.open (Native Method)
at java.io.FileInputStream. < init > (FileInputStream.java:106)
at java.io.FileInputStream. < init > (FileInputStream.java:66)
at oracle.sysman.agent.installer.AgentInstaller.main(AgentInstaller.java:147)
java.io.FileNotFoundException: C:\software\12.1.0.1.0_AgentCore_233 (access is denied)
at java.io.FileInputStream.open (Native Method)
at java.io.FileInputStream. < init > (FileInputStream.java:106)
at java.io.FileInputStream. < init > (FileInputStream.java:66)
at oracle.sysman.agent.installer.AgentInstaller.main(AgentInstaller.java:147)
java.io.FileNotFoundException: C:\software\12.1.0.1.0_AgentCore_233 (access is denied)
at java.io.FileInputStream.open (Native Method)
at java.io.FileInputStream. < init > (FileInputStream.java:106)
at java.io.FileInputStream. < init > (FileInputStream.java:66)
at oracle.sysman.agent.installer.AgentInstaller.main(AgentInstaller.java:147)
ERROR: OMS_HOST cannot be null.
"OMS_HOST & EM_UPLOAD_PORT validation failed."
Help, pleaseThis occurs because the RESPONSE_FILE must be given at the C:\software\12.1.0.1.0_AgentCore_233\agent.rsp and not up to C:\software\12.1.0.1.0_AgentCore_233
Please let me know if that solves the problem -
Windows Server 2008 R2 Activation error 0 x 80070005
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: n/a, hr = 0x80070005
Windows product key hash: n/a, hr = 0x80070005
Windows product ID: 55041-178-8577096-84607
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00020110.1.0.007
ID: {2F5492D1-27AD-4A54-8E0B-53EB6FCB6291} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Server 2008 R2 Standard
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: disabled
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: disabled
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: disabled
Recognized ActiveX controls safe for scripting: disabledAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{2F5492D1-27AD-4A54-8E0B-53EB6FCB6291} 1.9.0027.0 6.1.7601.2.00020110.1.0.007 x 64 *-*-*-*-BATH 55041-178-8577096-84607 6 S-1-5-21-3011534046-397137371-3240662683 Microsoft Corporation Virtual Machine American Megatrends Inc.. 090006 20120523000000.000000 + 00062C80D00010000F2 0409 0409 India Standard Time(GMT+05:30) 1 3 VRTUAL MICROSFT 109 Content Spsys.log: 0 x 80070002
License data-->
C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission deniedWindows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
N/a, hr = 0x8007000dActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC VRTUAL MICROSFT
MICROSFT FACP VRTUAL
SRAT VRTUAL MICROSFT
VRTUAL MICROSFT WÆT
SLIC VRTUAL MICROSFT
OEM0 VRTUAL MICROSFT
VRTUAL MICROSFT LASRYVITRAGEAsk in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
Update for Windows Server 2008 R2 x 64 Edition (KB3161608)
It seems that update for Windows Server 2008 R2 x 64 Edition (KB3161608) caused an error of communication channel protected on OpenManage, anyone else see this today?
Running Windows 2008 R2
Servers PE 840 field and a general PE 2900 server
Remove the two KB3161608 server resolves the problem, but then I have my updated servers to update.
The next fatal alert: 40. The internal error state is 808 (on my domain name)
The next fatal alert: 10. The internal error state is 1203. (On general server)Dell OpenManage (64-bit) Version 7.4.0 systems management software
Copyright (C) Dell Inc. 1995-2014. All rights reserved.Details
Version of the Broadcom SNMP Agent 17.6.4
Common Storage Module Version 4.4.0
Engine data Version 7.4.0
Material programming interface Application Version 7.4.0
Instrumentation Service Version 7.4.0
Version of the Intel SNMP Agent 1.118.0
Server Web Apache Tomcat 7.0.39 version
Oracle Java Runtime Environment Version 1.7.0_21
Administrator of Server Core files Version 7.4.0 (866)
OMACS Version 7.4.0
Instrumentation Service Integration Layer Version 7.4.0
Instrumentation of the administrator of the server files Version 7.4.0
The inventory Collector Version 7.4.0
Storage Management Version 4.4.0
The Common Framework Version 7.4.0 server administrator
Logging system Version 7.4.0
Remote Access Controller managed node Version 7.4.0
Server SNMP instrumentation, Module Version 7.4.0
Agent for remote access Version 2.0.0
Server WMI Instrumentation Module Version 7.4.0
OSMA 8.3 installation and will be re - install KB3161608
http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=TK61C
General PE 2900 Server
It seems that this IS THE DIFFICULTY.
Now test OSMA 8.3 on my domain controller.
Area PE 840
It seems that this IS THE DIFFICULTY.
Make sure that you run Windows Update after restarting the installation KB3161608 Server
-
ACS any Version with Windows Server 2008 R2 64-bit domain controller
Hi all
Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?
Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.
I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).
Thank you
Pato
ACS currently cannot be installed on a server running Windows 2008 R2.
As an alternative, you can install ACS on a member server. Authentication
ACS uses the local machine net API authentication both compared to a 2008
R2 domain will work. The Remote Agent can also be installed on a 2008 R2
Server if you use devices.
If you install ACS on a member instead server here is how to configure services
to authenticate properly with the domain:
-Jesse
-
P2V Windows Server 2008 with SP2
I'm trying to P2V conversion and a windows Server 2008 with Service Pack 2. I keep getting and error failed to get material etc.. Can someone please help me with this problem. I can't understand this problem.
Thank you
The worker logs or logs of the agent is important, but you must disable UAC and log in with the administrator user local physical machine. HTH
-
Windows Server 2008 and see VM
HI - y at - it something special to take account when you try to use Windows server 2008 standard R2 as guest OS custom as a virtual machine in a server connection pool? I installed the agent, but the connection to the server says "Waiting for agent. However, I can connect using a pool of Terminal Server services.
Thank you very much
I'm not good at these, i suggest to create another topic with relevant header would make it more visible for the rest at the entrance...
-
Hi team,
I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...
Following is the error message:
"Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.
So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?
Thanks in advance,
It's even easier than that
Use this: http://www.winimage.com/
Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...
-
Pavilion c 500-467: windows server 2008 display driver
I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008. Help please!
Hello:
You want to try the W7 64 bit drivers for 2008 Server R2.
Try to install the drivers manually if automatic installation method does not work.
-
Definitions for Windows Server 2008
Hello!
I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.So if someone knows how to fix this please let me know.
You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.
-
WLAN on Satellite L505-10Z PSLS3E with Windows Server 2008
I have Toshiba Satellite L505 - 10Z PSLS3E on Windows Server 2008 and to install the WiFi driver but can't find the right installation files and I downloaded the Vista driver installation and the driver may be installed on the right but when I try to connect to wireless networks, I have * NO * CAN find any available networks despite many networks on my area.
What can I do?
EH it's always difficult to find drivers for unsupported operating systems.
Your Satellite L505-10Z network card wireless Realtek 802.11 g (RTL8187B) inside, then you can try to search for the driver on the manufacturer's support page. -
Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit
I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.Any ideas what this can be?
Thank you for your comments!
If you are looking for drivers or unknown devices anytime, once again, that could be useful:
[How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&] -
Hello
I have a desktop PC remotely with Windows Server 2008 x 64.
I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?Thank you very much.
Ryan
Hey Ryan,
This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.
You can find the printer specifications below, only the operating system on the system Rquiredments are supported:
Kind regards
Shlomi
-
HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2
I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).
It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription. I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.
I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device. I looked everywhere but could not find something that works. Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).
Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0
BIOS: FRIEND 8.12
Here is the list of "other devices" in Device Manager that Windows does not recognize:
BCM20702A0
(USB) Universal Serial Bus controller
(USB) Universal Serial Bus controller
Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012
USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03
Windows doesn't always recognize them after allowing him to look on the internet.
I googled everywhere and I'm not getting anywhere.
Does anyone have advice?
Any chance that this could be linked to the BIOS?
I'm not having any chance to find a BIOS download for this motherboard either.
Any help is very appreciated!
Find out!
Use your expertise in software engineering to mod the driver for USB 3.0 to work...
Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1
http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739
Maybe you are looking for
-
EDIT MESSAGES - cannot change new messages.
Dear support, First of all, thanks for the chat message number address updated. Second, there is another question about modify / delete the new message sent by me. You please consider this also, it is a serious and it must be resolved. I have attache
-
MainStage 3.2.3 hangs after reclassification of the 3.2.2
I learned Mainstage and have implemented several concerts... Everything was cool with 3.2.2 and the latest OS update 10.11.2. Then I upgraded to 10.11.3 and Mainstage 3.2.3 and Mainstage crashes when loading... (attempts to load the concert). Man,
-
messages lost in Outlook Express in the month of September 2011.
messages lost in outlook express in the month of September 2011 and they reappeared last week, then again disappeared. How to restore the mEssages'.
-
How to find the library files that are not due to problems of indexing
I need help to know how to find the library files that are not as a result of indexing problems? I use Windows 7 Thank you Charlene
-
Incorrect monitor detected by Windows Update.
Hello I am running Windows 7 Ultimate 32-bit in my processor of Pentium dual core.The problem is that initially I thought that the native resolution of my Viewsonic VA1716w monitor is 1280 * 1024. But recently, I found in the Web of Viewsonic site, t