Windows Server 2012 FTP over SSL

Similar Questions

• Dreamweaver (on Windows 7) does not connect to the server, IIS (v7) using "FTP over SSL/TLS...". »

  I am weather evauating to buy Dreamweaver CS6...

  Trial of Dreamweaver CS6 (on Windows 7) does not connect to the IIS server (v7) using "FTP over SSL/TLS (explicit encryption).  I have a NEW Godaddy SSL certificate installed on the IIS server.

  On the connection between States Dreamweaver: "server certificate expired or contains invalid data."

  I tried:

  -ALL Dreamweaver Server configuration options

  -L' use of multiple certificates (I tried 2048 and 4096-bit Godaddy SSL certificates)

  -Make sure the certificate "issued to the"domain name is my domain name. "

  I am able to connect without a problem with Filezilla, Filezilla equivalent affecting 'explicitly require FTP over TLS.  I can connect both using Microsoft Expression web.

  This has been discussed previously. I recommend reading my old thread for details:

  http://forums.Adobe.com/thread/889530

  But to make a long story short, Godaddy is incorrectly signed SSL certificates on shared servers.  The servers/ips/domains and the certificate do not match.  So DW and many other tools fail authenticate with Godaddy SSL connections.  Some users have stated that other tools FTP, such as Filezilla as you mentioned, bypass and automatically change your connection to insecurity, but DW is very picky.  Once you modify encryption against zero, the connection will be accepted.  Best solution is if you want a certificate SSL correctly signed move to another host because Godaddy refuses to admit that they are wrong with SSL certificates on their sites.  These warnings will appear also to your users if you have a store saying the SSL certificate does not match the domain/ip and this can make users checking in a very nervous showcase.

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can not reduce the brightness or can change the screen resolution to double screen in windows server 2012 R2.

  Hello Experts

  I'm new to this community and please forgive me if I hurt all over.

  Use windows server 2012 R2 on my laptop (previously I was using Windows 7 Home premium), now I cannot able to reduce brightness or can change the resolution of the screen to double (I want to connect my laptop to a bigger screen using VGA cable).

  Everything was fine using Windows 7. But after the installation of the server, I am facing this problem.

  Please help me.

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserver8gen

  It will be useful.

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Satellite C660 - 1 DG-drivers of Windows Server 2012

  I started Windows Server 2012 (for development purposes).

  Now... where can I find the drivers?

  * display driver *-lets start with the display driver (for the Intel Graphics Media Accelerator HD) when I look for the display driver in the support forum I only find the driver of Intel for Windows 7, but there is none yet for Windows 8? -Installed Windows 7 driver - works ok :)
  * sound driver * -.

  What drivers Miss do you?

  Fact is that Toshiba offers all drivers for supported operating systems.

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• T61 - Datacenter Windows Server 2012

  Hi all

  I need to install Windows Server 2012 Datacenter with Hyper-v installed on a Thinkpad laptop, because it is more durable compared to others, and I am planning buy Lenovo ThinkPad T61 with following specifications:

  Hello

  Looking system requirements here on the website of Microsoft, it seems that the T61 meets the system requirements to run Windows Server 2012, but it's largely because Microsoft does not seem to differentiate between the requirements for the Foundation, Essentials, Standard, and Datacenter editions.

  Personally, I would suggest to go with the bigger, more quick 2012-vintage (or most recent) laptop that I could find, for example a W520 or the W530.

  Kind regards

  Aryeh Goretsky

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• R2 Windows Server 2012

  Hello

  I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

  Concerning

  Jean baby

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Windows Server 2012

  I was wondering if anyone can help me with setting up Windows Server 2012, I have a server need active directory to be installed, so appreciate help with that.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.