Windows Update always fails with the error code 80072f8f (Windows vista SP2).

Similar Questions

• Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Automatic updates (KB2656353 & KB2656370) always fails with the error code 0 x 643 for several occations and continue to offer. Several attempts to install manually also failed. Help is very appreciated. Thanks: SEBUBE

  Try each of the methods of repair HERE. If none of these solves the problem, we'll go from there.

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• Update KB951847 failed with the error code 80200053

  Day before yesterday I did a reset (this was described to me, basically as a reformatting of all readers and a reinstallation of original software) on my desktop HP with Vista x 64.  Yesterday, I was doing the Microsoft Updates (I think he had 101 in total which stood for me).  All of the except KB951847 installed correctly.  When he reached KB951847 it says it failed with the error code 80200053.

  I read on another thread that security antivirus software or others could cause this problem, but I still have to install it all because I read that it can interfere with some updates from Microsoft.

  If anyone has solutions, I would be very grateful.

  Choose one or two-online http://www.google.com/search?hl=en&rls=com.microsoft:en-US&q=+site:answers.microsoft.com+KB951847+%2B+optional+%2B+hide&biw=1003&bih=589

• Windows Update KB968930 fails with the error code 800F080D

  For the last week I have "been trying to install this update, Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) and the installation fails, with error code 800F080D. I am always prompted to install it. Is there a resolution? Meanwhile a few other updates when the installation was successful. Thanks in advance!

  Hi MariMaraki,

  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  You can check the link and try to use the system analysis tool and check.

  Windows Update error 8024200d

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

  This also applies to Windows Vista.

  After you run the tool, try to install the update manually and check.

  See the link to download the update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=f2fa1227-9a34-4E29-AA03-62f5c00e16f2&displaylang=en

• Windows Update KB968930 fails with the error code 80070026

  Windows Update fails to load after the creation of a restore point. Someone at - it guess why?

  The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow.

  I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem.

  You can try to follow the given article:

  http://support.Microsoft.com/default.aspx/KB/936212>

  NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it:

  You can also try the following article to reset Windows Component Update:

  http://support.Microsoft.com/kb/971058>

  ~ or ~.

  I would recommend that you...

  Launch a collateral request for assistance free Windows Update:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

  Support for Windows Update:

  http://support.Microsoft.com/GP/wusupport>

  --

• XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE

  OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor

  I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack

  I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed?

  I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE.

  Thank you

  TMcC

  Problem solved!

  Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date.

  I will me BEDTIME!

  Thank you guys for the entries.

  Tom

• Update KB923789 fails with the error code 0 x 643

  Automatic update has tried several times to install an update for Flash Player (KB923789) security but it fails every time with error code 0 x 643. I am running XP Home Edition with service pack 3. Anyone with the same problem with, hopefully, a solution?

  Hi Peter Butterfield,.
   
  Download and install the update manually by visiting the following link:
  Implementation of security update for Flash Player (KB923789)
   
  In addition, see:
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

• Impossible to update Kb2570791 failed with the error code 80070020

  Microsoft windows vista KB2570791 security update cannot be installed with many attempts and each time showed error code 80070020.  Anyone have asolution or can have the experienced, like very some remedy.

  Thank you very much
  Willy

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/im-getting-a-failed-popup-message-on-trying-to/e9e7b42d-4fa8-4842-a7f8-738cf1bbb009

  0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825>

  UTC/GMT is 10:47 Tuesday, September 6, 2011

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.