Windows Update KB968930 fails with the error code 80070026

Similar Questions

• Windows Update KB968930 fails with the error code 800F080D

  For the last week I have "been trying to install this update, Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) and the installation fails, with error code 800F080D. I am always prompted to install it. Is there a resolution? Meanwhile a few other updates when the installation was successful. Thanks in advance!

  Hi MariMaraki,

  If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.

  You can check the link and try to use the system analysis tool and check.

  Windows Update error 8024200d

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d

  This also applies to Windows Vista.

  After you run the tool, try to install the update manually and check.

  See the link to download the update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=f2fa1227-9a34-4E29-AA03-62f5c00e16f2&displaylang=en

• XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE

  OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor

  I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack

  I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed?

  I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE.

  Thank you

  TMcC

  Problem solved!

  Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date.

  I will me BEDTIME!

  Thank you guys for the entries.

  Tom

• Windows Update always fails with the error code 80072f8f (Windows vista SP2).

  All directings on assistance to this error page in fact and not solved the problem.

  When you try to synchronize the clock as instructions say this fails also.

  Internet Explorer says invalid certifocates on microsoft support pages.

  It is a clean installation, everything that is on the machine is Vista SP2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/windowsupdatedt000-windowsupdate80072f8f/945f3ec1-8bac-4c10-A54E-1e564d18c37e

  03:37:1108/01/11

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• Update KB951847 failed with the error code 80200053

  Day before yesterday I did a reset (this was described to me, basically as a reformatting of all readers and a reinstallation of original software) on my desktop HP with Vista x 64.  Yesterday, I was doing the Microsoft Updates (I think he had 101 in total which stood for me).  All of the except KB951847 installed correctly.  When he reached KB951847 it says it failed with the error code 80200053.

  I read on another thread that security antivirus software or others could cause this problem, but I still have to install it all because I read that it can interfere with some updates from Microsoft.

  If anyone has solutions, I would be very grateful.

  Choose one or two-online http://www.google.com/search?hl=en&rls=com.microsoft:en-US&q=+site:answers.microsoft.com+KB951847+%2B+optional+%2B+hide&biw=1003&bih=589

• Windows Update will fail with the error: error code 80072F78

  Original title: windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Hello
   
  1. who is the software antivirus installed on the computer?
  2 did you have any software or changes to the material on the computer before this problem?
   
  Method 1:
   
  See the steps in the following links.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  If the problem persists, see the steps from the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997
   
  Registry warning
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
   
  Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
   
  Hope the information is useful.

• Error code 464: I'm trying to update my windows but I failed with the error code associated with 464

  IAM trying to update Microsoft Office Service Pack 2

  ·                         http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  Mick Murphy - Microsoft partner

• Impossible to update Kb2570791 failed with the error code 80070020

  Microsoft windows vista KB2570791 security update cannot be installed with many attempts and each time showed error code 80070020.  Anyone have asolution or can have the experienced, like very some remedy.

  Thank you very much
  Willy

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/im-getting-a-failed-popup-message-on-trying-to/e9e7b42d-4fa8-4842-a7f8-738cf1bbb009

  0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825>

  UTC/GMT is 10:47 Tuesday, September 6, 2011

• Windows backup will fail with the error code: 2147942402

  Hello

  I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery."

  This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data.

  The Event Viewer error code: 2147942402

  I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key.

  I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix.

  I'll reformat the USB drive to see if that helps...

  Thank you very much

  Adrian

  Hi Adrien,.

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us updated on the status of the issue.

• Windows 7 backup fails with the error code: 0x8078012D

  I ran several backups on my external hard drive without problem, but I am now constantly a backup failure with an error code of 0x8078012D.

  How can I fix?

  Hi Helen,

  I suggest to rerun the command chkdsk (check disk) and let us know if there are bad sectors found/fixed.

  You can also see the following article for more information about the disk check:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Also, make sure that the Volume Shadow Copy service is running.

  Follow the steps below:

  a. click Start.

  b. type Services in start search.

  (c) in the search for Services Windows shadow copy volume and the Windows backup from the list.

  d. right-click on the Service.

  e. click Properties.

  f. Select the Startup Type to Manual.

  g. click OK.

  h. now, repeat the same for the service Windows backup.

  Let us know the results.

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• Update KB923789 fails with the error code 0 x 643

  Automatic update has tried several times to install an update for Flash Player (KB923789) security but it fails every time with error code 0 x 643. I am running XP Home Edition with service pack 3. Anyone with the same problem with, hopefully, a solution?

  Hi Peter Butterfield,.
   
  Download and install the update manually by visiting the following link:
  Implementation of security update for Flash Player (KB923789)
   
  In addition, see:
  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?