Windows Update asks me to install Vista Service Pack 2

Similar Questions

• I tried with windows update and manually to download vista service pack 2, but these two don't

  I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

  It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

  http://support.Microsoft.com/kb/331796

  The procedure should work the same for Windows 7 and Vista.

  Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

• Update invites me to install a service pack Windows, but whenever I do, I lose my internet connection.

  I use internet 8. Windows Update repeatedly continues to ask me to install the service pack that when I do I lose my internet connection and there to remedy, I come to restore the system to a previous date to get my internet connection

  Hi James,

  1 Windows operating system you are using?

  2 are you facing this problem after installing service pack (SP) or at the time of installation of SP?

  If you are faced with the question after the installation of the service pack, you can visit the computer manufacturer and try to update the drivers of network card on the latest version and check.

  Updated a hardware driver that is not working properly

  You also try to launch the troubleshooter from the following link and check.

  Windows wireless and wired network connection problems

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Im trying to install vista service pack, its driving me crazy. im making error code ox800700. Please help2

  Im trying to install vista service pack, its driving me crazy. im making error code ox800700. Help, please

  Hello

  Error message: 0 X 8007002 can occur if the update of Windows on the computer database is incompatible with the instructions of the update database.
  
  Refer to the suggestions from the following link and check.
  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I tried to install vista service pack 1 error code 8007036be

  I tried to install vista service pack 1.  After so many times, I made a fix it.  Now, I'm getting an error message 8007006BE.  Can anyone help?

  0X800706BE RPC_S_CALL_FAILED =
  The remote procedure call failed.

  Which means in a way, that communicate with the update server cannot be established.

  This could be caused by a third-party product running on your computer like anti virus etc.

  You can try a clean boot of your computer and installing the update or in the alternative, download the full update and install it.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Windows Vista Service Pack 1 (SP1) - 434.5 MB
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
  Windows6. 0-KB936330-X 86 - wave0.exe

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
  Windows6. 0-KB936330-X 64 - wave0.exe

  Windows Vista Service Pack 1 - language standalone DVD ISO
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
  6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/library/cc507882.aspx

• I'm having a problem on an Acer lap top install Vista Service pack 2

  The tower above for a pre Vista Home Premium 32-bit installed on it and with the Service Pack 1

  The notebook soiled by the following malicious software

  Trojan Downloader Troxen! RTS

  Java/OpenConnection.FB Trojan Downloader Java

  Exploit Java/CVE-2008-5353. NT

  Exploit Java/CVE-2009 - 3867.GU

  I removed the laptop HD and scanned the computer and removed infections above.

  Then I ran Windows Vista repair an Installation CD:Disc

  Finally, the laptop worked normally and I could access the internet and update Microsoft Security Essentials.

  However, I can't install Vista Service pack 2

  I installed the fix pre-installation KB947821-v15 - x 86

  I then installed the SP2 file Windows6 Installtion. 0-KB948465 - X 86

  It finished up to 100% in step 3 after the restart, how she restored to SP1.

  Everything worked OK then how to get SP1 to install it is a legacy of the aforementioned Trojan.

  If a full Microsoft Office 2003 retail version is preinstalled on the computer when you bought it, Office 2003 will be reinstalled when you perform a clean Windows installation... as long as you use either drives OEM that came with the computer when you bought the hidden restore [1] or to partition the clean install.

  If you have purchased & installed Office 2003 separately, you will be able to reinstall (after completing the clean install of Windows) using your Office 2003 CD-ROM.

  ============================================
  [1] not to be confused with the restoration of the system (Windows).

• Acer aspire has stopped working after I installed vista service pack, a

  After installing Vista service pack 1, I was unable to restart my computer. Nothing has worked. I went through the Startup Repair, but it ran all night and nothing. I have no disk, so I tried to do a system restore, but still nothing. I know very little computers if you can give me some details step by step on the following questions would be most appreciated.
  

  (1) how do I back up my data

  (2) how to restore my system

  Thank you

  Craig
  

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons). +

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are replaying the ad.

  .

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Tried to install Vista Service Pack 1... epic fail

  I tried to install vista service pack 1 and had no luck. I downloaded directly from Microsoft and installed. After waiting and waiting, my computer had restarted and said "changes in the Installation failure-recovery '. Now, the computer starts only in safe mode. I ran the check disk and the system started fine then. However, I turned off the computer after that and he returned only safe mode.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• CheckSUR unavailable repair files: install Vista service Pack 2, x 32

  CheckSUR results after trying to install Vista service pack 2:

  Checking of manifests package and catalogs
  (f) CBS catalogue Corrupt 0x800B0100 servicing\packages\Package_5_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.cat

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB963027_client_1~31bf3856ad364e35~x86~~6.0.1.1.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB963027_client~31bf3856ad364e35~x86~~6.0.1.1.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.mum

  Control components store

  Summary:
  Seconds executed: 27320
  Found 4 errors
  CBS MUM lack count: 3
  Total number of corrupt CBS catalog: 1

  Unavailable repair files:
  servicing\packages\Package_5_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.mum
  servicing\packages\Package_for_KB963027_client_1~31bf3856ad364e35~x86~~6.0.1.1.mum
  servicing\packages\Package_for_KB963027_client~31bf3856ad364e35~x86~~6.0.1.1.mum
  servicing\packages\Package_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.mum
  servicing\packages\Package_5_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.cat
  servicing\packages\Package_for_KB963027_client_1~31bf3856ad364e35~x86~~6.0.1.1.cat
  servicing\packages\Package_for_KB963027_client~31bf3856ad364e35~x86~~6.0.1.1.cat
  servicing\packages\Package_for_KB963027~31bf3856ad364e35~x86~~6.0.1.1.cat

  (w) cannot read the 0 x 00000017 system event log

  Help, please!

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to install Vista Service Pack 2, affirms the need to install Service Pack 1 first

  I try to install Vista Service Pack 2 automatically, and it is said to be complete after 5 seconds.  I have check and don't have Service Pack 1 installed.  I am trying to download and install Service Pack 2 manually, and it tells me I have to install Service Pack 1 first, but it is installed.  What should I do?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Impossible to install Vista Service Pack 1 through Windows Update

  Hello

  Recently I had to reinstall windows vista home premium 32 bit on my old acer aspire laptop. I did a "clean install", all was well with this operation. I had to install a large number of various updates after doing, now I am notified via windows update vista service pack 1 is available for download/installation. When I try to perform this action, I get a popup window that informs me of what to know before installing sp1, then I reach a window where I have to accept the terms of the software installation. Once I click on the little square and accept the conditions, it goes to another window with two choices... install & cancel, when I click the button install... instead of windows update download and install the update, I am presented with the view of windows update, the update has been installed successfully When in fact it was not. I prefer to install sp1 via windows update, because she was supposed to be a size smaller than the stand-alone version available on microsofts website. Has anyone else had the same question, and if so how do you fix? Of course this laptop is not my main computer, but as it still works very well I continue to use it.

  Thank you

  David

  Hello

  Support for Vista without SPs is complete.

  Use the standalone version for both SPS.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I installed Vista Service Pack 2 update...

  I installed an update to Vista Service Pack 2 and at the bottom right of my screen, it says Windows Vista (TM) evaluation copy. Build 6002.  My copy of windows Vista came with my RESUME!  Now when I turn on my computer it says my evaluation copy is on ot expires in 9 days! HELP to

  I have a sticker # PID on the side of my HP that has an OEM in it which means it came with the machine, I bought... I am very scared that I lose access to my company.

  Hello

  you have a Pre-release Version (beta, RC ) of the SP2 installad. Open Control Panel and select programs-> installed updates and uninstall Sp2. After uninstalling Sp2, elast 1 hour wait and download the Final Sp2 and install this version.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot install Vista Service Pack 2 (or closer to Windows 7)

  Intel Core 2 Due CPU 8400 @ 3.00 GHZ w 2 GB RAM running (Windows Home Premium 64-bit).  Service Pack 1 is installed.

  Buy windows 7... tried last month upgrading Vista however the updater doesn't install not service pack 2. (KB948465).  kept trying to install it but would get to the end and fail, and then seeks to restore to the previous version and I would then have to start in safe mode.
  Spent the last day trawl through all instances and followed each piece of advice out there, but still no joy.
  Manually install the update for Windows (KB947821).  Uninstalled all antivirus & anti-spyware (AVG & Norton were both running).  Ran System File Checker & Windows Install CleanUp and say that everything is OK.
  Each reboot the computer in order to start the installation it restarts.  must select Safe mode with network... so going directly in "installation of the Service Pack: stage 3 of 3" arrives at 100% complete but then message comes up saying "Service pack do not have. '"  Restoration of the changes.  Do not turn off your computer. "Then"Configuring updates"and then to the normal login screen.  When I connect and go update history it reads "Windows Vista Service Pace 2 for x 64-based systems (KB948465).»  Details of the error 8007043 C Code.

  I then followed the instructions to install from the original DVD however after several hours I finally managed: 'the upgrade has failed.  your previous version of WIndows is being restored.  Do not restart your computer during this time. »

  Looking around and we found a lot of people with this issue but no solutions.  Don't know what I can do now?
  Any help is greatly appreciated!
  
  Best,

  Tom

  Uninstalled all antivirus & anti-spyware (AVG & Norton were both running).

  I just noticed the above your first post. You had AVG and installed NAV and loading at startup? What were you doing thought? Not surprising that SP2 or Win7 upgrade would not install!

  You must have an installed AV 1 and loading at startup. Chances are that AVG or Norton worked properly.

  You have 2 choices:

  1. back up your personal data (of which none should be considered reliable) and then format the HARD drive and do a clean install of Vista. or...

  2. make a "custom (Advanced) installation" of Win7 and then delete %system%\Windows.old <=this> . Do not even think to transfer the data from Vista to Win7. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft