Windows update fails-error number: 0x8024400A

Similar Questions

• Windows Update problem [error number: 0x8024400A]

  Windows XP Home Edition SP2

  Frustration excels!... ""Error number: 0x8024400A "Message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For two days I tried to get downloaded SP3. I did a clean install then and tried a second time, no chance even result. I did one installs own before without any problem of MS.

  I went through hoops to Microsoft a number of times, Windows Update, the 'Fixit' without success and tried SP3 downoads, one of 300 + MB, another 500 + and another of I believe was around 7 800 MB, not to mention the various links, but just seem to go along in a circle without solution. I tried to install SP3 several times, but after a while, the computer stops the download and I have to start over with the same results.

  I have read many of the [error number: 0x8024400A] comments on here but none of the suggestions seem to work for me so far. I don't know, it's maybe just me in my frustration after so many hours trying to get this "thing" to work and just to be led by steps or by hand at this stage... Just do a climb the walls!

  In desperation of cause and beyond frustration, I really hope someone can help out me of this mess is drowning. Thanks for your suggestions... Herb

  Hi HerbJS'em.

  I downloaded SP3 on a flashdrive in a café internet and installed on my machine with no problems.  Updates have been working since.  Had received the same error #.

• try to download the update of windows... error number: 0x8024400a...

  try to download the update of windows... all I get is "the website has encountered a problem and cannot display the page you are trying to view" error number: 0x8024400a the... no idea on how to solve this problem?

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at the level of Service Pack 3 before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• try to update windows I get [error number: 0x8024400A]-what I am doing wrong?

  [Error number: 0x8024400A when I try to update windows - am I doing wrong?]

  -What is your operating system Windows XP SP3 level?

  If this is not the case, see:

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• Web site does not show updates, download [error number: 0x8024400A]. Had to reformat Windows XP Pro and now can not get updates.

  Had gotten ransomware virus and ended up having to reformat my Windows XP to return.  Now the update of Windows will not display the available updates and get [error number: 0x8024400A] error message.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28 's sp 2... put that on the first, then sp3

• Windows update failed error codes 643 and 800736B 3

  My computer trying to install updates, but fails - I checked update history and it installed OK until the 16.10.2010, the installed just a few of the UpdateA and is now not install at all. I get 643 and error codes 800736B 3. I ran the resolution of problems and he can't find any problems. I am running Windows 7, the computer was new at the beginning of last October. can you help me, please?

  Windows update fails to install with error code 800736B 3 updates

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/98573891-EEAD-4257-8bf2-1fbac3f2a96a >

• Windows Update failed, error code 646. Microsoft fix - it has not corrected, error code 0 x 80040154

  Update for microsoft works failed, error code 646.  I tried microsoft fix - it for windows update got error code 0 x 80040154, context: high

  See: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/error-code-80040154-windows-vista-home/5088695c-c534-41c5-bdac-518713506875

• Windows Update failed - error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Original title: Windows Update Failed - need help

  Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly.  I tried to restart, remove the update (even by deleting the file so it would download it again) and install again.  Nothing has worked.  Error 80070643.  Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework.  Don't know what that means.

  Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again.  Still didn't update.

  Then, I waited two days and tried again.  Even that did not help.

  I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all).  He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer.  Error: 70347 (0x112cb).

  Now I'm really confused.  On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.

  On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem.  (And why it all of a sudden would be any problem with permissions?)  This computer is not on a corporate network and has only one user account, the administrative account).  I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.

  Help!  Please...

  And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot).  Still no.  Everything I try, it is not to do nothing, pardon my language.  People smarter than me, pleasehelp!

  Hi stupID_,

  «Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »

  As the error relates to SQL, perhaps this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Windows 7 Build 7600, Windows Update failed: Error Code 80096004

  Whenever I try to update my Windows 7 Home Edition Build 7600 through Windows Update, I get most of my updates reported as failures, and you try to update results once again updates failed fault and fault again, as in they are always fail. This computer is only a few weeks and I was never able to update windows properly and I always "error (s) found: Code 80096004.»

  I'm under Alienware BIOS A09 if this is any help, and windows is genuine through the OEM. I got non-genuine errors in previous windows that were due to windows update failures, and yesterday I restored my computer to factory default which has removed all errors except windows update errors. So, to get these updates correctly will mitigate hope-other problems I have.

  I used to receive the codes of error such as 80096003 and another who was something similar (do not remember exactly the code) to 8001b 010. Cutting windows firewall has removed these errors happen in windows update, or so I think.

  Anyway, the real culprit right now, I believe is the "error (s) found: Code 80096004.» How can I fix this error in my Windows Update so that I can continue to update? Whenever Windows Update tries to download updates, the process of "Download" will always result in a constant 0% and never pass and will always fail. I have about 30 updates, I need to download/update and catch him. Most are updated critical or very important.

  Thanks in advance.

  Hello
   
  
  Method 1.
  Reregister DLL files that are associated with Cryptographic Services
  To register .dll files that are associated with Cryptographic Services, follow these steps:
  a. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  b. at the command prompt, type the following commands and press ENTER after each command:
  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  output c.
  Access the article mentioned below for more information:
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
   
  Method 2.
  Also visit this link and run Fixit to reset the Windows Update components:
  http://support.Microsoft.com/kb/971058
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows update fails error Code 800F020B Hauppauge Computer Works WinTV HVR - 950 a ATSC/QAM valve

  Device Capture of Hauppauge Compuer Works, Inc. - Streaming Media and broadcast devices - WinTV HVR - 950q ATSC/QAM

  Installation date: 01/08/2009-10:55 (on build 7100 Windows 7 RTM)

  You may have to restart your computer for this update is taken into account.  (not restarted, update optional removed, the equipment does not work)

  Installation status: failed

  Error details: Code 800F020B

  Undate type: Optional

  Release of updated software Hauppauge Computer Works, Inc. Streaming Media and Drvices released in May 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20283357 (content is set to null, only placeholder)

  Help and Support:
  http://support.Microsoft.com/Select/?Target=Hub (how I arrived here to connect the update failed)

  Made repeated attempts with HVR-950 a device plugged upward, not blocked, etc.  Still didn't update installation.  Finally did me not able to not try again, no uninstall process defined in the current detail informaiton failture.

  Hello GrayWin7,

  Thank you for choosing Microsoft answers forums for Windows Vista. I hope you do well.

  You may need to update the drivers here. Please check the link for more details below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/b293f652-20ed-4D34-af07-f2cba6fe68f51033.mspx

  Alternatively, you can try to perform a clean boot:

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Follow the link for more information below:

  http://support.Microsoft.com/kb/929135

  Hope this information is useful.

  Thank you.

• I'm not able to run windows update. [Error number: 0 x 80244019]

  I'm not able to run windows update. I get an error: [error number: 0 x 80244019] I took and I tried all the suggestions on the support for windows Xp article because that's what I'm running [error number: 0x8DDD0010] "When you click on a link, you see the error HTTP 500 - internal server, error 0x8ddd0010 error" but none of these solutions work.  I tried the ' Fix It program this car works but askes me to install Windows XP Service pack 3 or later and .NET Framework 2.0 or later version of windows update but as you can see I can't get windows update to work if it does not really help. "  Any ideas... Help, please!

  What XP SP level are you at?

  For your error: http://support.microsoft.com/kb/883820

  But that will not help you if you are not at the level of SP3.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• Windows update fails, error code 0 x 80070003. Many.tries to update all the fail?

  Windows * gives me the penalty. All of the updates fail 1 HP and now all from windows. error code 0 x 80070003?

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x80070003

  If you receive Windows Update error code 0 x 80070003 or 80070003 when you use Windows Update, try this Automatic convenience store.

• Windows Update fails error 80244108

  Hello

  I recently bought a new laptop that came with windows 7. I also bought Office 2007 home and publishing student and my windows tries to install SP2 for it as well as a few other updates for windows 7 and software optional like silverlight.

  Now, I've never had a problem to update when on a network WLAN or LAN, but I'm on vacation in Egypt at the moment and I bought a pay as you go Vodafone 3 G USB stick and updates always seems to fail because of this, any ideas?

  Thanks in advance

  Make it as close as possible to a wireless antenna/tower & try again. You will need a strong & continuous signal for the automatic update to work via a USB wireless modem. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2267602 Windows Update failed - error Code 80070002

  When I try to install windows update KB2267602 I get an error code 80070002.  All started when I tried to update the definitions of viruses and spyware from Windows Defender.  There is an update available, but he would not move "by reason of a problem of network connectivity or internet".  Troubleshooting couldn't identify such problems in each system.  I checked manually to the Windows updates and my computer has downloaded the update above but every time I tried to install it, I get a "some updates were not installed" warning and it gives me the above error code.  I tried to troubleshoot Windows Update as an administrator and the convenience store was told that "one or more components of Windows Update are configured incorrectly" and that the problem has been corrected, but continues to be again and again the same thing.  Help, please.

  Try the solutions in this article, fix windows update errors:

  http://www.itprostuff.com/articles/fix-Windows-Update-and-Service-Pack-errors.html

  Use the steps based on your version of Windows, this worked with me with the service pack on Windows 7.

  and Windows Server 2012 updates, Windows 7.

• Windows Update failed (error Code = 80070017)

  It's my problem.

  In these few days windows keep prompting me to install an update of important safety for my system, but whenever I try to install it (manually or), it fails.

  The updated name is (KB2296199) and my system is windows 7 Professional x 64.

  George

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  `~`

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  `~`

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt
  Check disk or Chkdsk is disk error checking in Windows 7. It can be used to verify the alteration and possibly repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  `~`

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and verify the integrity of Windows 7 system files with System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  `~`