Windows Update necessary Live now does not work

Similar Questions

• Updated this AM - now does not work - application on the (0xc000001d) update error

  Updated this AM - now does not work - application on the (0xc000001d) update error

  Now what?

  JohnC salvation,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• Impossible to install itunes, open windows update, norton antivirus used does not work

  "ITunes can not install due to one of these errors occurred during the installation of assembly Microsoft.VC80.CRT, version ="8.0.50727.4053"Type ="win 32,", publicKeyToken ="1fc8b3b9a1e8e3b"process or architecture =" x 86 "RESULT: 0X8007054F

  "" I was told to install the update for Microsoft Visual C++ 2005, but then got a similar interneErreur 1935 an error occurred during the installation of assemblyMicrosoft.VC80.CRT type = "win32", version = "8.0.50727.4053" publicKeyToken = "1fc8b3b9a1e18e3b", process or architecture = "x 86".

  In addition, my Windows update no longer works.  I ran the fix is, but it did not help.

  And just to smile, my Norton Antivirus used open.  His appearing in my list program, but when I try to open it to get to the main console, it does nothing.

  Help, please!

  How to use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  For your message of problem of Norton here: http://community.Norton.com/

  iTunes:

  How to recreate your iTunes and playlists library
  http://support.Apple.com/kb/HT1451

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows 7 - cannot install system updates - "Windows Update service... does not work."

  original title: Windows 7 - cannot install system updates - "Windows Update cannot currently check for updates, because the service is not running." You may have to restart the computer. "

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: try to get weekly updates applied.  Since the 1845 update I couldn't have Nicrosoft updates applied to my system.  A disable the updates because the system continues to try, and I try again me and try all the time.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dena,

  I solved the problem: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  "FixIt" MS reported that he had fixed everything, and W7 update mechanism works very well- but the problem remains:http://support.microsoft.com/kb/971058

• . MOV in Windows Movie Maker Live files does not work

  I just installed WMML since I thought that it would support the .mov files without having to convert them.  I can see the video in the Windows Live photo/video gallery, but not in WMML when I open it up to edit video. The screen is all black with no video or sound.   I have Vista.  We just got a new digital camera to improve our videos, but are sad that we cannot use this software because we love him.   Help, please!

  What is the brand and model of the new camera?

  Many systems have problems with the MOV files... especially
  the HD version. Convert to WMV format can be
  worth a try.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• One of my ID Windows Live ID does not work

  One of my ID Windows Live ID does not work, I can't reset the password (I get an error), I can not connect with her online (I get an error).

  When I get the Live ID to submit a case on the support of Live ID site I get an error.  To clarify, errors are associated with the Live ID and come from Microsoft, it is not my PC that produces errors.

  I tried calling and e-mailing for the support to unsuccessfully (was returned to the site, which generates an error when I enter this Live ID, which means that I have no way to submit this problem in the right group - Live ID team)... What can I do to fix this problem?

  Hello

  The question you have posted is related to windows live ID and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com/product.aspx?ProductID=10

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!

  How can I fix the "drag and drop" feature in Windows 7?  It used to work, but now does not work, for no apparent reason!

  What happens when you try?  Make sure you drag the icon image and not the text of the name.

  If it still doesn't work there are some registry changes that can try to alleviate the problem.  But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you.  Here's how:
  1. Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
  2. Click Next, choose a date before the problem started, then click Next once more.

  • This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
  If the system restore does not resolve the problem try this to replace missing or corrupted system files.  Here's how:
  1. Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
  2. At the command prompt to start the File System Check, type sfc/scannow .

• have changed from xp to windows 7, now does not work my usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  You must install the driver for Winows 7 for the camera, * if * it exists. Get it at the web site of the manufacturer of the camera.

  Also, note the following:

  You ever need connect your device directly. Buy a card reader for the type of flash card your camera uses (they are very expensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is much easier and doesn't use the camera battery. I have two cards - one readers that I keep on my desk next to my desktop computer and another that I keep in my case of laptop for use when traveling.

• The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

  The foot pedal RS27 and Olympus AS-5000 - work of transcription for Windows 8 or 10 (pedal does not work on Windows 7 and do not want to shell out $300 to Olympus again)

  Any help Nauru will be stuck with Windows Vista, I had to get three versions of Olympus and their pedals over the years and all they do is change the wiring or jacks, stupid as * I just like five different types.

  Desperately need to know if these pedals will work or does he know about the Sony or another software of transcription for the typist, not the dictator.

  Help.

  Hi Marvin,.

  Thank you for the quick update.

  Yes, I understand your question. However, if the programs worked with an earlier version of Windows, they can work with Windows or Windows 10 8.1 if you install programs in compatibility mode. If you access the executable file (.exe) for the game, I suggest you follow the steps provided below:

  Step 1: Download and save programs on the desktop.

  Step 2: Install the programs in compatibility mode.

  • Right click on the .exe file and click Properties.
  • Go to the compatibility tab.
  • Check the box for run this program in compatibility mode for:
  • In the list of operating systems, select Windows Vista (or any other compatible OS) .
  • Click OK.
  • Double-click the executable file to install the program and follow the instructions on the screen.
  • Restart your computer.

  Additional information:

  Make the programs more compatible with this version of Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

  If I search on possible improvements, he says it should work?

  Try the chat support:

  Activate your Windows 10 license with Microsoft Chat support