Windows Update stops download of updates and install updates same as if they were never installed
Windows Update stops download of updates and install updates same as if they were never installed
Hi Skimbrell,
Welcome to the Microsoft Answers Community Forum site!
To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.
Determine whether the update has been installed
To determine if the update has been installed, use one of the following methods.
Method 1: Examine the history of installation
To view the history of installation, follow these steps:
1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
2. on the Web site, click view update history.
3. Locate the most recent entry for the specific update.
4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.
For more troubleshooting information, visit the below mentioned link:
http://support.Microsoft.com/kb/910339/
Method 2: Reset Windows Update components.
In order to reset Windows update, visit the following link:
http://support.Microsoft.com/kb/971058
I hope the above helps solve your problem!
Thank you best regards &,.
Calogero - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
Tags: Windows
Similar Questions
-
is it possible to download windows 7 on a USB stick and install it on a computer wiped
is it possible to download windows 7 on a USB stick and install it on a computer wiped
Yes, but you must do what is necessary. ISO that you create on a USB bootable copy.
Prepare the. ISO installation file.
See the instructions for burning. ISO in Windows 7 or later files:
http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file
You can also use the Microsoft USB/DVD tool, which is recommended for users of Windows XP.
After getting the file .iso that you use it Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).
For UEFI systems based
If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.
Rufus - credit: Pete bastard/Akeo
After installing Rufus:
- Launch it
- Select the ISO Image
- Point to the file ISO for Windows 10
- Check create a disk bootable using
- Select GPT partitioning to EUFI firmware as the Partition scheme
- Choose FAT32 NOT NTFS as file system
- Make sure that your USB in the device list
- Click Start
- Close when you are finished
Begin the installation.
The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.
For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:
http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
Once your computer is configured to boot from the DVD, you should see this option.
If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:
-
I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM
A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM
A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.
To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.
See also: how to solve the safe_mode of Flash Player for Firefox? :
-
Hello
I get the beginning of the muse of adobe, the error that the application manager adobe is damaged or not installed
Now, I downloaded 2 times and installed the problem remains, however
can someone here with rat page
Kindly try to remove Adobe Application Manager to help cleaning tool and remove CC help | Uninstall the creative desktop application Cloud can download and install Adobe Creative Cloud apps.
-
My software stops downloading at 50% and then tells me to contact adobe support if it continues to be.
is this a download or installation message?
If download, use a different browser or an another wired connection and/or a download from prodesigntools.com download manager
-
I downloaded creative cloud and install when I try too install Photoshop it goes to the screen that says creative cloud 2014 release I already have POS and pay for Photoshop?
Log, activation, or connection errors. CS5.5 and later versions
Mylenium
-
I use Windows Live Hot Mail... and have the same problems as the previous person, asking a question on their e-mail. The only option I have to choose tools are on internet option. This is not fix my problem before the email (to make changes to the police and have the new police to stay)... of suggestions?
Hello, please send your application in the Windows Live Hotmail Forums. Here is the link...
http://answers.Microsoft.com/en-us/windowslive/default.aspx
I hope that this information is beneficial.
Thank you
Aaron
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Recently, I switched from PC to Mac, and I transferred all my files photo. Now I am their integration in the Photos app in the dock (by dragging the file etc). But when I include photos from a folder in the Photos app in the dock, and then create an album for them, their order in the album change of what it is in the file. It is important for me to keep them in the same order that they were in the file. (In the file it is in numerical order). Any solution?
You can drag and drop to any order in your albums.
-
KB973688 and KB954430 do not install. Windows Update tries to install these two updates, but they never complete the installation. Tried to install KB954430 manually, but it would not install. Event Viewer event id 7023 windows module Installer service ended. Dialog box shows HRESULT:0x800736FD {7B30B69B-036c-b7e0-a06b-d6b9abf34537}. KB973688 would not install either. Tried rebooting, shutdown windows update, so I could install by hand. No updates will be installed. Help, please.
This question always took place or simply with KB973688 and KB954430?
Have you tried manually download and install updates?
Have you read the known issues with this security update of the section of KB954430 and try the steps recommended?Suggest you download and Save KB954430 first . Since you did not specify if the system is 32 or 64 bit.
If you are not sure which architecture is the system, open System in Control Panel.
Look next to system type under law to see whose architecture is the system.KB954430 for Windows 7
Windows 7 for 32-bit systems
Windows 7 for x 64 systemsOnce the download is complete to read this and configure the system to boot .
Start in what is called a State of cleanliness will ensure that Sophos and printing software (including HP print software) does not interfere with the installation of the update.
Once you have started own the system, right-click the update registered and choose 'Run as administrator' .
Accept guests UAC to allow the update to install.
Reboot the system after installation.Is he being always reaffirmed or just KB973688 be already now?
If KB973688 is the only be reaffirmed, install now while the system is still in the clean boot State.
That bring them both installed?Cancel the clean boot procedure as set out in the KB article , they have or they do not have and please post back with your results.
MowGreen Services consumer safety update -
This happened for months and I just found out 3 days ago. If you look at the history of the update, you see that SP1 has been installed successfully for 14 months (more than 50 successful install of SP - 1). I was prompted to investigate the automatic update of Windows, is that it takes forever for this system to stop and start. He is constantly confuguring or install updates and there is no stopping it most of the time. I can't seem to get it to start in SafeMode as he zips through even if the f8 key is pressed and causing a beep.
At first I restored to an earlier point, but noted that there was very little to choose restore points. I contacted HP and they recommended a difficulty of their site that helps with updates. I ran and persistent .net updates succeeded (However, he is the one who seems to be back). I ran the program of preparation for Service Pack 1 on the site of Ms. I ran the program fix - it on the site of Ms.
Can someone help me please?
Hello
Thanks for posting on Microsoft Answers.
It seems that updates could be partially installed on the computer.
I suggest you open programs and features and select view installed updates and look for the updates and make sure he completely uninstalled.
Once the updates are completely uninstalled try to perform the updates of Windows and check to see if there are completely installed on the computer
Before you run Windows updates ensure that security software are disabled temporarily.
Also to put the computer in a clean boot state and check
Following steps will help you put the computer in a clean boot state:
1. click on start, type msconfig in the search box and press ENTER.
2. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. in the general tab, click Selective startup.
4. under Selective startup, clear the check box load startup items.
5. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
6. click on OK.
7. When prompted, click on restart.
Once you're back at the office, try to download the system analysis tool and run it: http://support.microsoft.com/kb/947821
Once it's done you can download Service Pack 1 standalone package and try to install it on the computer, you can download service pack 1 from the following link: http://www.microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en
Try to install and check.
After service pack 1 is installed on the computers try to put the computer to normal startup.
1. click on start, type msconfig in the search box and press ENTER.
2. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. on the general tab, click Normal startup, click ok, and restart the computer.
It may be useful
Kind regards
Niranjan -
Windows Update warns even if they are not online.
Is there any point in telling me that I need malware protection if I'm even not using the internet?
I also posted this, why the date change stop updates to apply?
http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/a86ea594-f39a-460c-a0ef-930c693603f2If you are not connected to the Net, you can't be infected.
But it can be a catch-22.If you move that data from a computer connected to the Net to Net - not connected with a Flash Drive, you can move the infections, but also data.
But you can't protect the non-net stand-alone computer with malware, you have no way of updating.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
There is a reference to the time in the thread above about the windows updates.
This can help you to first time:http://support.microsoft.com/default.aspx/gp/cp_dst
«Updates of Microsoft products and release plan for DST changes and time zone: more than Windows-based applications (and a few services) the underlying operating system for more information of time and time zone reference.» However, some applications and services are not. Microsoft Windows has established an annual calendar of update time and time zone, as shown here. Many of our product teams also follow a similar pace put on annual day of product, with provisions for semi-annual cumulative updates as needed. For each version update, the window closes for additional updates (usually of four to six) months prior to the release date. The regular release of Windows provides a regular schedule for other product categories to follow. "
«Individuals: If you are using Windows Vista or have enabled automatic updates, you can't be affected by the DST change.» If you want to confirm, please consult the list of the products concerned. "
http://support.Microsoft.com/GP/dst_prodlist
See you soon. Mick Murphy - Microsoft partner
-
Windows update - same update installs several times
original title: update Windows
Why do I have to install the same update over and over when it say it is installed
Follow the troubleshooter listed Zhang.
It is possible that a file was not updated. First of all, check that the kb update has been installed by going to View installed updates in Control Panel
Go to start > all programs > Windows Update
Check for updates if updates pre-installed reappear, right-click on it and select hide.
-
How can I delete windows OEM base of my laptop and install windows 7 ultimate?
I have laptop HP Pavilion 2149se g4 that preinstalled with windows 7 oem base version... How to clean windows 7 basic and install windows 7 ultimate... When I go with formatting the hard drive and install windows 7 it stop and tried to install windows XP and there was my blue screen
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
-
I bought windows 7 with user indulgence and install on a computer. After a while this PC stop working with hardware failure. In this case, I can install windows 7 (single-user license disk) on another PC?
Yes, you can, but you may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
It is a new work computer, not my personal machine. Our main piece of software, ACT! 2000, will not work on W7. We bought the new law! 2010, but he does not play well with the rest of the desktop computers, server included. I know that the best thing to do would be to upgrade to Windows 7 Pro, and then load Windows Virtual PC to run XP. But because of $$$ and $$$ already spent on this new computer, upgrade to W7 Pro is not on the table right now.
And am not extremely computer, but I get. :) I did a lot of reading on the erasure of Windows 7 & install XP, and I've seen a lot read on hardware/driver problems: ATA, AHCI and SATA configurations... now I'm just lost.
Is there someone who can tell me, in terms of Joe 6-pack , how to proceed?
Once, my new Dell Inspiron 560 came loaded with Windows 7 Home Edition, and I need to remove it completely and install Windows XP, I have the disc.
Thanks a bunch!
Unfortunately, Dell provides Windows XP drivers for this system, so any installation of Windows XP is not supprted by Dell andcan not work and even install
To install winxp you need a retail version of Windows XP, you must then boot from winxp cd and perform a clean installation
Maybe you are looking for
-
Open the tabs in Safari only synchronize between devices
I have 4 devices. iMac, Mac Mini, iPhone and an iPad and I really like the fact that Safari can show the tabs open on all devices, but it does not work properly here. The iMac will only sync with the iPad and the iPhone only syncs with the Mac Mini.
-
implementation of a push button
Hey I just started using Labview and I need for a project on the recording of the results of strain gauge. I wrote a code for data recording, but I don't know if he needs calibration I use the NI 9237 strain gauge module and how to proceed to make th
-
update values in the cluster on front panel
I'm sure I'm missing something obvious, but how a cluster on the Panel before updating its values? Synchronous display does not work as I expected, that should be. REF. the attached example: I want the values of the numerical control façade to update
-
update of Windows live essentials
An update came last week. Since then, my "Dell Dock" does not work. Also, whenever I close Word or Excel, I get a message: "your automatic connection file, \XXX))).acl, could not be saved. The file may be read-only, or man you're not allowed to ed
-
The file 'Asms' on the CD-ROM Windows XP Professional is required
Original title: asms Hai, When I do install o/s new in my PC it is problem continues to recover on continuously, then after he disappeared like installation almost complete 3 minutes then after restalling again and again, but now asking that the file