Windows Update, the components are configured incorrectly, the code; C00D11C6

Similar Questions

• Error code 0 x 80070424. Update Windows components are configured incorrectly.

  Original title:

  Windows Update will not work. I get error code 0 x 80070424. Update Windows components are configured incorrectly. How can I fix it?

  'Windows Fix It' found update components need to be repaired!  I can't run windows updates. I get error code 0 x 80070424.  Update Windows components are configured incorrectly.  How can I fix it?

  Hello

  1. Are what 'Windows Fix It' you referring?
  2. You did changes to the computer before the show?

  Method 1:

  You can follow this link & check if the problem persists:

  Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

  http://support.Microsoft.com/kb/968002

  Method 2:

  You can run the fixit available in the following link:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  You can also follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  I hope this helps!

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• Windows Update one or several Inc. update of windows are configured incorrectly

  Hi problems unravel my update windows, found the problem one or more Windows Inc. update are configured incorrectly.

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  As downloads fail, when run you the fix it choose its mode by default when you run the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 22:16 Tuesday, October 18, 2011

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• one or more components of windows update are configured incorrectly

  whenever I have try and install the im says yhat updates updates have been sussfull, but when the computer restarts, I get this message: one or more Windows Update components are not correctly configured and converted back!

  Hello

  1. the problem occurs with all updates you are trying to install?

  2. you remember any changes made to the computer before the show?

  I suggest you components reset Windows Update and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

• Components Windows Update are configured incorrectly

  original title: repair Windows Update componet

  Unable to get the Windows Update. One or more components of Windows Update are configured incorrestly. What can I do to fix this?

  See if this article helps you:

  "How to reset the Windows Update components?"
    <>http://support.Microsoft.com/kb/971058 >

  HTH,
  JW

• My Windows Vista is not all important security updates. Error message that says that one or more components of Windows Update are configured incorrectly.

  I have tried to trouble IT 50202, but which failed due to the error 2678!  Support center has no solution.  Microsoft site does not have its own error code 2678.  Ridiculous.

  This was a huge waste of time and effort because he tries and fails to reinstall everytime I stop.

  RECAP:

  • You bought the computer in January 2009;
  • The computer came with a preinstalled free McAfee;
  • A McAfee application was permanently installed until you have installed Microsoft Security Essentials (MSE) on 23 August 2012;
  • You first met the problems associated with malware (according to MBAM) in June 2010, the first year of your McAfee subscription.
  • You have problems with Windows Update (MSE) on October 12, 2013, more than a year after you have installed MSE;
  • You have improved the pre-installed McAfee free trial to the full version rather than uninstall the free trialware, running the tool to remove McAfee & then make a clean installation of the paid version.
  • You have uninstalled the McAfee application until you have installed MSE but you don't not download/run the removal tool from McAfee before installing MSE.

  MY HUMBLE OPINION...

  • It was too late for the "come to the rescue" McAfee removal tool here.
  • There is a possibility, but remote, you see the effects of an infection for a long time of a certain type (because MSE has not been installed correctly & so never worked properly due to 'remains' of McAfee).
  • The computer must be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Then what are you doing now?

  OPTION A: You can get Microsoft-sponsored Premium (i.e., paid) supported by the Office of response-online http://answerdesk.microsoftstore.com [1]

  OPTION B (highly recommended): see the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the clean install, please start your own new thread in this forum & advice: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a 'BigBoxStore' or Geek Squad!) computer repair shop & let them do the work.

  OPTION C: Bite the bullet & buy a new computer (Win7).

  • If you want to transfer your personal data to the new computer, backup data from one or more DVDs (no shine). Perform analyses considered at least two 2 online (e.g., ESET;) Kaspersky; Bit Defender) of the DVD (s) before you transfer the data to the new computer.

  Wish I had better news for you, Roz.  Good luck!  On & off...

  =================================================
  [1] $99.00 USD for up to (1) hour of distance support; tax must be paid in advance; no guarantee whatsoever

• Error manually running Windows updates "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.

  Original title - manual update of Windows XP via "Windows Update" fails

  07/01/14: click on "Windows Update" on the desktop (XP Home) and XP Tablet

  Result: 'the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. »

  This office has begun on about 3 days ago and just this morning appeared on the Tablet

  I do McAfee and Microsoft updates manually every morning after the startup of computers so that they will not automatically be updated when I'm busy with other things

  I suspect that the McAfee via Verizon security package is the culprit since the 'look' of their package and procedures changed end of December

  Since then, they have had updates almost every day

  And around the same time, my problem appeared on XP Home Edition, I was not able to access Adobe PDF files and had to re-download Adobe Reader XI

  Any body else having the same problem?

  And help get the update of Windows XP to run again?

  It would not be the first step to disable automatic updates in Control Panel and manually download and install the most recent cumulative security update for internet explorer since without first, everything in the way of troubleshooting will be futile?

  Download and install the latest cumulative security for IE8 update and manually restart the computer.

  visit windows update via the shortened link in your Start menu.

  Assuming that you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

• Impossible to manually reset the Windows Update KB971058 components

  System: 32 bit, Win 7 Home Premium SP1

  Problem: WU forever "check for Updates" after had to power-off because boot hung to ' installation up-to-date 68 74 "»

  History: Perform clean installation of Windows 7 Windows Update (WU) has stopped working on the last image.  This time, WU has been successful for the first days of the new facility (as long as you would expect at least 10 hours between updates).  One day after I finally got a 'Windows is up-to-date,' 74 updates popped up.  When the computer reboots, updates the procedure until I believe has been updated 68 74.  No progress for more than 24 hours has a power down.  Updated regulated PC updated incomplete on the next reboot.

  Last action/results:

  • Chkdisk is OK.
  • At ran WindowsUpdateDiagnostic in KB/971058; Has no difficulty.
    • Troubleshooting of BITS

  

  • Troubleshooting Windows Update tool:

  

  • Installed WindowsUpdateAgent-7, 6 - x 86
  • Convenience store of WU ran again; Impossible to fix:

  

  • Has begun the steps in article KB 971058 to manually reset the components WU.
  • In step 2:
    • BITS service is not started.
    • WUauserv service failed to stop.
    • AppIDSvc has not been started.
    • cryptsvc stopped.
  • Used MSCONFIG to disable these four services on the next reboot.  Everything stopped.
  • To KB article 971058 step 5 I got the following RegSvr32 errors:
    • "The"mshtml.dll"module has been loaded but the DIIRegisterServer entry point was not found.  Make sure "mshtml.dll" is a valid DLL or OCX file and try again. »
    • "Module"shdocvw.dll"was loaded but the entry point DIIRegisterServer was not found... »
    • "For"browseui.dll"module has been loaded but the DIIRegisterServer entry point was not found..." »
  • • "The 'msxml.dll" failed to load module.  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.  The specified module could not be found. »
    • "The module"gpkcsp.dll"failed to load...". »
    • "The module"sccbase.dll"failed to load...". »
    • "The module"slbcsp.dll"failed to load...". »
    • "The module 'initpki.dll' failed to load...". »
    • "Module 'wuaueng1.dll' could not load...". »
    • 'Module 'c:\windows\system32\dllcache\wucltui.dll' failed to load... ". »
    • "The module"wuweb.dll"failed to load...". »
    • "Module"qmgr.dll"was loaded but the entry point DIIRegisterServer was not found... »
    • "Module 'c:\windows\system32\muweb.dll' could not load...". »
    • 'Module 'muwebv.dll' failed to load... ". »
  • Step 7 - reset Winsock.  ALERT receipt: «you must restart the computer to finish...» "I has not restarted since had several commands to run.
  • AtStep 9 - "appidsvc" could not be started ERROR: "because it is disabled or because it has no enabled devices is associated to him."
  • Step 11 - Ran WindowsUpdateAgent - 7, 6 - x 86 install again by Ko.
  • Restarted.
  • The value of WU to never automatically check updates

  Conclusion: Windows Update always forever ' check for Updates ' Article 971058 Knowledge Base has not automatically or difficulty manually Windows Update.

  Anyone know an easier way to reset Windows Update manually?

  Has no way of resetting, as matters get triggered side server. None of the default update clients is able to manage some of the most recent updates. This has been fixed in the update of the client featured in KB3161608. Download and install it manually and make sure not to do a search of update running in the background at this time.

  https://support.Microsoft.com/en-us/KB/3161608

  Best regards, VZ

• Auto windows update says there are 2 important updates, but after trying the said that they failed with an error 646.

  Windows Update set to automatic download important updates.  He worked until a week ago, it indicates that it is 2 important updates.  He tried to download these two updates since 3/10, but they fail and he says that there is an error 646.  What is the problem?

  

  You can try to download the updates manually (search for a download) and install the same.
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en)

  This is the current solution for office updats in particular.

  TaurArian [MVP] 2005-2010 - Update Services

• Why I can't install the WIndows updates after they are downloaded successfully. I REENROULER get the error code 646.

  My computer has no install regular updates for nearly 6 months.
  Error code 646 appears several times as the reason for the failure to install after the download of the updates successfully.

  You may have overlooked this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft