Windows updates automatically, and loss of data

Similar Questions

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

  original title: lost document

  I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

  If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

• Windows installed the automatic windows update agent and I would appreciate help with the settings option in this newly installed agent update so no update never install or download unless I choose to do.

  Hello.

  I have windows vista 32 bit home edition.

  Today somehow automatically installed windows ' automatic update agent 747600226

  I always keep my settings to check the updates but let me choose whether to update or install.

  With this new "update automatic agent" which automatically installed on my system, I want to make sure I have place it properly so that it remains in the same way that I always have my settings but two settings (options), he checked, and are confusing for me to know what those checked settings will do.

  I would like to help you with these settings to make sure that the update is still as I want.

  Below chose correctly when the new program installed today.  That's how I still want the settings to be:

  Look for updates but let me choose whether to update or install

  Please let me know if I need to change all the options account required in addition to this update agent to ensure that only, I choose to update or install.

  There are four options and a box is in two and I don't know if I should remove the check marks or not.

  Here are the other four options that I need to know how to configure it so that only I have update/install.

  Once again, the download automatic microsoft today (update automatic agent 7.4.7600.226) without asking for my incentive preset automatic update options and that's what I'm trying to make sure is set correctly so that nothing installs or updates without asking me or let me do.

  Option 1: (this option is checked. If I leave it checked will be it install or warn me only?)

  Give me updates recommended in the way I receive important updates.

  Option 2: (this is not checked and am not worried about this one)

  Allow all users to use installed on this pc.
  
  Option 3: (this is checked and want to know if should uncheck; what I don't want is any what to auto install, but the wording of this option and option 1 are vague because of the "give me " so I don't know what it means or will do.)  If this box is left to it automatically update/install?)

  Give me updates for Microsoft products and looking for new optional microsoft software when I update windows

  Option #4 (this is not checked, and I am not concerned about this).
  
  See the notification me detailed when new microsoft software is available.

  Thank you very much for your help.

  Take care! :)

  Hello

  The Windows Update automatically updates the updater (himself), regardless of your settings.

  1. Yes it will alert you so you can update or install.

  2. check if you need more of yourself (other users) to be able to select and install the updates.

  3. it will let you know when they become available.

  4. just gives the news of additional details about some of the updates.

  Looks like you're ready for anything you like.

  Rob - bicycle - Mark Twain said it is good.

• Cannot install Windows Update KB2728973 and KB2917500

  Hello!

  The Windows Update KB2728973 and KB2917500 are appearing repeatedly on Help and Support Center, windows update and the automatic update check on purpose to get updates of high priority (recommended) button.

  The update of windows KB2728973 will automatically appear on the notification area.  I installed the KB2728973 update.  When I check the latest version of windows update in Help and Support Center, the KB2917500 appears in patches of high priority (recommended).  I also installed the KB2917500 update.  Once again, the update of windows KB2728973 will be automatically appears on the notification area and install it again.  And even once, when you check that the latest version of windows update in Help and Support Center, the KB2917500 appears again in the updates of high priority (recommended).

  As a closure update, only once you update, it appears again.

  Looking forward to our experts advise on this issue.  Guys thank you very much in advance.

  You only need KB2917500 since it replaces the KB2728973. Try to install manually by downloading it from http://www.microsoft.com/downloads/details.aspx?FamilyId=11534eba-01c5-42ad-8254-3123fe204661.

• prompt to keep the same windows update over and over again

  Hello

  I've been doing the following updates over and over again. They do not seem to have been installed on my XP Pro SP3 machine, although she said that she had installed the updates.

  A security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)

  Anyway, I tried to stop the updates automatic and pieces through command promt back but to no avail.

  If I write what is in windowsupdate.log

  2012-02-03 15:37:22:234 1408 548 to receipt install 2 customer approval updates
  2012-02-03 15:37:22:234 1408 548 TO THE #.
  2012-02-03 15:37:22:234 1408 548 to THE # START # to THE: install updates
  2012-02-03 15:37:22:234 1408 548 TO THE #.
  2012-02-03 15:37:22:234 1408 548 to THE # Initiating manual installation
  The approved updates # in THE 2012-02-03 15:37:22:234 1408 548 = 2
  2012-02-03 15:37:22:312 1408 ad8 Agent *.
  2012-02-03 15:37:22:312 1408 548 TO THE<## submitted="" ##="" au:="" install="" updates="" installing="" updates="" [callid="">
  2012-02-03 15:37:22:312 1408 ad8 Agent * START * Agent: installing updates [CallerId = AutomaticUpdates]
  2012-02-03 15:37:22:312 1408 ad8 Agent *.
  2012-02-03 15:37:22:312 1408 ad8 Agent * updates installed = 2
  2012-02-03 15:37:22:359 1408 ad8 Agent * title = update of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
  2012-02-03 15:37:22:359 1408 ad8 Agent * UpdateId = {8914D187-D0C7-4C7E-9824-CFCFF4C8377D}.104
  2012-02-03 15:37:22:359 1408 ad8 Agent * updates the 2 beams:
  2012-02-03 15:37:22:359 1408 ad8 Agent * {150273BC-82B4-43D6-AE3D-C289D94CBC21}.104
  2012-02-03 15:37:22:359 1408 ad8 Agent * {F1B1B1E1-2B22-4445-8A9C-5924BF945D32}.104
  2012-02-03 15:37:22:359 1408 ad8 Agent * title = update of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  2012-02-03 15:37:22:359 1408 ad8 Agent * UpdateId = {DCB443DD-76E6-47A3-8BDE-F0EBFA112190}.101
  2012-02-03 15:37:22:359 1408 ad8 Agent * updates the 2 beams:
  2012-02-03 15:37:22:359 1408 ad8 Agent * {45418357-0883-4EE3-98C6-CC93460D35B5}.101
  2012-02-03 15:37:22:359 1408 ad8 Agent * {A9AD85CC-1F2B-4F55-A426-66632F2A6147}.101
  2012-02-03 15:37:25:484 1408 ad8 Manager to try to create a remote process manager as PBJ-UNIT3\user in the session 0
  2012-02-03 15:37:25:781 1408 ad8 DnldMgr preparation update for install, updateId is {150273BC-82B4-43D6-AE3D-C289D94CBC21}. 104.
  2012-02-03 15:37:25:859 2920 e7c Misc = logging initialized (build: 7.4.7600.226, tz: + 1100) =.
  2012-02-03 15:37:25:859 2920 e7c Misc = process: C:\WINDOWS\system32\wuauclt.exe
  2012-02-03 15:37:25:859 2920 e7c Misc = Module: C:\WINDOWS\system32\wuaueng.dll
  2012-02-03 15:37:25:859 2920 e7c Manager:
  2012-02-03 15:37:25:859 2920 e7c Handler: START: Manager: command line installation
  2012-02-03 15:37:25:859 2920 e7c Manager:
  2012-02-03 15:37:25:859 2920 e7c Manager: installed updates = 1
  2012-02-03 15:37:26:500 2920 e7c Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
  2012-02-03 15:37:26:500 2920 e7c Manager:
  2012-02-03 15:37:26:500 2920 e7c Handler: END: Manager: command line installation
  2012-02-03 15:37:26:500 2920 e7c Manager:
  2012-02-03 15:37:26:625 1408 ad8 DnldMgr preparation update for install, updateId is {F1B1B1E1-2B22-4445-8A9C-5924BF945D32}. 104.
  2012-02-03 15:37:27:437 2920 fc0 Manager:
  2012-02-03 15:37:27:437 2920 fc0 Handler: START: Manager: command line installation
  2012-02-03 15:37:27:437 2920 fc0 Manager:
  2012-02-03 15:37:27:437 2920 fc0 Manager: installed updates = 1
  2012-02-03 15:38:01:062 2920 fc0 Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
  2012-02-03 15:38:01:062 2920 fc0 Manager:
  2012-02-03 15:38:01:062 2920 fc0 Handler: END: Manager: command line installation
  2012-02-03 15:38:01:062 2920 fc0 Manager:
  2012-02-03 15:38:01:093 1408 a80 to THE > # RETURN # to THE: installation update [UpdateId = {8914D187-D0C7-4C7E-9824-CFCFF4C8377D}, successful]
  2012-02-03 15:38:01:156 1408 ad8 DnldMgr preparation update for install, updateId is {45418357-0883-4EE3-98C6-CC93460D35B5}. 101.
  2012-02-03 15:38:01:203 2920 768 Manager:
  2012-02-03 15:38:01:203 2920 768 Handler: START: Manager: command line installation
  2012-02-03 15:38:01:203 2920 768 Manager:
  2012-02-03 15:38:01:203 2920 768 Manager: installed updates = 1
  2012-02-03 15:38:01:296 2920 768 Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
  2012-02-03 15:38:01:296 2920 768 Manager:
  2012-02-03 15:38:01:296 2920 768 Handler: END: Manager: command line installation
  2012-02-03 15:38:01:296 2920 768 Manager:
  2012-02-03 15:38:01:328 1408 ad8 DnldMgr preparation update for install, updateId is {A9AD85CC-1F2B-4F55-A426-66632F2A6147}. 101.
  2012-02-03 15:38:01:718 2920 e7c Manager:
  2012-02-03 15:38:01:718 2920 e7c Handler: START: Manager: command line installation
  2012-02-03 15:38:01:718 2920 e7c Manager:
  2012-02-03 15:38:01:718 2920 e7c Manager: installed updates = 1
  2012-02-03 15:38:06:093 1408 aec report REPORT EVENT: 2012-02-03 + 1100 1 183 101 15:38:01:093 {FEACDBA5-005E-4161-A8A5-3E61D7A9E85B} {8914D187-D0C7-4C7E-9824-CFCFF4C8377D} 104 0 AutomaticUpdates success content install Installation successful: Windows successfully installed the following update: a security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
  2012-02-03 15:38:41:593 2920 e7c Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
  2012-02-03 15:38:41:593 2920 e7c Manager:
  2012-02-03 15:38:41:593 2920 e7c Handler: END: Manager: command line installation
  2012-02-03 15:38:41:593 2920 e7c Manager:
  2012-02-03 15:38:41:640 1408 a80 to THE > # RETURN # to THE: installation update [UpdateId = {DCB443DD-76E6-47A3-8BDE-F0EBFA112190}, successful]
  2012-02-03 15:38:41:671 1408 a80 at THE facility call ends.
  2012-02-03 15:38:41:671 1408 ad8 Agent *.
  2012-02-03 15:38:41:671 1408 ad8 Agent * END * Agent: installing updates [CallerId = AutomaticUpdates]
  2012-02-03 15:38:41:671 1408 a80 to # WARNING: installation of the calls, reboot required = no, error = 0 x 00000000
  2012-02-03 15:38:41:671 1408 ad8 Agent *.
  2012-02-03 15:38:41:671 1408 a80 in THE #.
  2012-02-03 15:38:41:671 1408 a80 to # END # in THE: installation of updates [CallId = {E8C8152C-8888-443C-A2C9-CD9A79AE656D}]
  2012-02-03 15:38:41:671 1408 a80 in THE #.
  2012-02-03 15:38:41:671 1408 a80 in THE installation complete for all calls, DO NOT reboot needed
  2012-02-03 15:38:41:671 1408 a80, the phase of installation to THE adjustment to THE planned for 2012-02-03 16:00
  2012-02-03 15:38:46:640 1408 aec report REPORT EVENT: 2012-02-03 + 1100 1 183 101 15:38:41:640 {C193FC62-E029-4AD3-A6F6-8482B5EFB43B} {DCB443DD-76E6-47A3-8BDE-F0EBFA112190} 101 0 AutomaticUpdates success content install Installation successful: Windows successfully installed the following update: a security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  2012-02-03 15:38:46:750 1408 930 (non-interactive) Offline detection trigger
  2012-02-03 15:38:46:828 1408 628 IN THE #.
  2012-02-03 15:38:46:828 1408 628 in THE # START # to THE: research updates
  2012-02-03 15:38:46:828 1408 628 IN THE #.
  2012-02-03 15:38:47:546 1408 628 TO THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
  2012-02-03 15:38:47:546 1408 ACS Agent *.
  2012-02-03 15:38:47:546 1408 ACS Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
  2012-02-03 15:38:47:546 1408 ACS Agent *.
  2012-02-03 15:38:47:546 1408 ACS Agent * Online = No; Ignore download priority = No
  2012-02-03 15:38:47:546 1408 ACS Agent * criteria = "IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Installation' and IsAssigned = 1 or IsHidden = 0 and IsPresent = 1 and DeploymentAction = 'Uninstall' and IsAssigned = 1 or IsHidden = 0 and IsInstalled = 1 and DeploymentAction = 'Installation' and IsAssigned = 1 and = 1 RebootRequired or IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Uninstall' and IsAssigned = 1 and = 1 RebootRequired."
  2012-02-03 15:38:47:546 1408 ACS Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
  2012-02-03 15:38:47:562 1408 ACS Agent * Search Scope = {Machine}
  2012-02-03 15:38:47:593 896 868 CltUI client got new directive = 'Shutdown', serviceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, return = 0 x 00000000
  Event handle to THE receipt 2012-02-03 1408 628 15:38:47:609

  I write this subject of the question, he (the yellow shield with exclamation mark in the middle) happens again.

  Any help would be greatly appreciated.

  Thank you

  Try to install some other updates and then reboot your PC and run the update again. If the problem has not been resolved, and then run this tool:

  http://support.Microsoft.com/mats/windows_update/

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.

• Vista - windows update broken (and then some)

  Hi everyone, maybe you could help me with this...

  My system is a laptop running vista home basic service pack 2.
  The laptop is also on a wireless network without proxy.
  all moving parts are functional, I would say... (ram hd etc..)

  It seems that this update of windows is quite unable. Common symptoms are
  -When you try to search updates notice occurs that the service is stopped.
  -A separate statement occurs informing that a host process has stopped working.

  The most recent update I see is 11/09.

  A quick glance around my services leads me to believe that BITS is the problem, because I can't seem to start the service without stopping quickly. It also reproduces the host process error notice.
  Event Viewer shows a consistent error listed as follows...

  Failing application svchost.exe_BITS, version 6.0.6001.18000, time stamp 0x47918b89, failed module qmgr.dll, version 7.0.6002.18005, time stamp 0x49e037de, exception 0xc000001d, offset 0x000587e7, process 0x2d8 id error code, start the application time 0x01ca8c8b35264f9f.

  The error also occurs with windows defender.

  I tried the fix for BITS of http://support.microsoft.com/default.aspx/kb/940520 including the manual fix suggests the page.
  I also tried several methods which included manually stopping and restarting the windows update service and other services that I considered relevant.
  System restore failed me on all accounts, Startup Repair can not find anything.
  This error is also reproduced in safemode, but also a clean boot.

  An interesting thing that I met just used the fixit found here
  http://support.Microsoft.com/kb/971058
  I ran it automatically with the aggressive function checked.
  After the reboot, I found that windows update worked but then the two BITS and windows update services stopped.
  There is also a message in the editing window:

  Code 800706BA (unknown error)

  I did a considerable amount of research on the internet, including the knowledge base and I can't seem to find a solution for this. So I turn here. After watching a few discussions, it seems that people here are knowledgeable and helpful.
  In all sincerity at all any help is GREATLY appreciated.
  Thank you for your time.

  Hello

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The foregoing is necessary preparatory work.

  ------------------------------------------------------------------
  Error 800706ba Windows Update<- check="" this="">
  http://www.instantvista.com/800706ba.html

  If the updates you don't need or want the control panel - Windows Updates - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  To download manually:

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot access the Windows Update site and install updates

  Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.

  I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.

  Hi trski,

  I recommend you to check for possible malware program.

  1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
  a. press the restart.
  (b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
  c. Select Mode safe mode with networking
  2. open the Web browser to explore and go to http://safety.live.com.
  3 scan the OneCare Safety Scanner full Service.
  4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
  5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.

  Run Windows Update again, and get back to us with your findings.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update download and install when my PC is in mode 5000mAh?

  Will windows update download and install when my PC is in mode 5000mAh?

  Hi Hassan,.

  You will not be able to plan / run Windows update in standby mode. It can be in "idle" mode or when executing system.

  I hope this helps.

• Windows 7 CBS huge log files, very heavy use of the disk during Windows Update passages and plenty of RAM used by svchost

  Since I installed and then uninstalled windows 7 display language pack (it is thus more no record of it in the locale), namely for the Chinese, I get my CBS.logs (reaching several hundred MB to each race) filled with lines like these:

  "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~ar-SA~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.
  2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
  2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present
  2015-07-18 22:07:35, CBS Appl info: detectParent: package: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, no found parent, go away
  "2015-07-18 22:07:35, CBS Appl info: detecting, Package Parent: Package_for_KB3045999 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.1, Parent: Microsoft-Windows-WinPE-LanguagePack-Package~31bf3856ad364e35~amd64~hu-HU~6.1.7601.17514, layout = Detect, VersionComp: EQ, ServiceComp: EQ, BuildComp: EQ, DistributionComp: GE, RevisionComp: GE, Exist: present.

  and these:

  «2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b...» OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_cs - cz_91faa7482cc099d9, raise: 2, applicable(true/false): 0
  2015-07-18 22:07:35, CBS Appl info: Selfupdate, component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_0.0.0.0_da - dk_5074e001f3d72380 (6.1.7601.23002), altitude: 2 lower support of revision version: 0.0.0.0
  2015-07-18 22:07:35, CBS Applicability (ComponentAnalyzerEvaluateSelfUpdate) info: component: amd64_microsoft-windows-b... OS - loader.resources_31bf3856ad364e35_6.1.7601.23002_da - dk_2f34876f230695d8, raise: 2, applicable(true/false): 0 ''

  Now, it seems that windows is searching for updates on all the available languages and that really cripples my PC whenever Windows Update for new updates, what can I do to stop this?

  Thank you

  After the installation and the removal of the update of Chinese language (even though he was again through regional settings because I could not see it in the installed applications or updates, and if I used the windows update install) and after the windows update service modules and removing all CBS connects the problem seems to have disappeared.

  Thank you all for your help.

• Windows Update failure and & SFC /scannnow results

  Hello, Win7 64 bit home edition Premium user.

  I restarted my PC with an old XP OEM from my previous PC drive and he started to move - I stopped it at first, but he replaced my startup file, I had to be replaced by reinstalling my backup/dual boot OS, Linux Mint.  After spending a whole day trying to solve my startup files (Windows Repair on the Windows 7 disk did not work, System Restore was not available), I went into Windows by copying the necessary files from the drive via the command prompt.  At least, I think it's finally finished work - it was quite a long ordeal.
  Fast forward to today: after being able to go back to Windows (if I have still two entrances Win7 on my Start menu that seem to do the same thing), I noticed that some of my mouse functions have disappeared (zoom button does more work), and my windows updates will install is no longer.  I tried to replace the mouse driver software, but after uninstalling it with "Program install and uninstall" Fix - It, I could not reinstall it because I got an error message saying that a newer version of the software has already been installed.  I raise this issue because I believe that it is a problem with Windows Update no longer works.  I even took the trouble to uninstall however much 100 + updates I had allowed the years to start from the beginning, and now I'm stuck with more than 100 updates failed instead of a dozen or two.
  It getting to download 0% for a very long time sometimes hours, before finally download and try to install the updates many and always default.  I tried the troubleshooting Windows Update tool, and it did not help.  I tried to solve any problems by using the file system (SFC/scannow at the command prompt) checker, but no luck - I received an error message stating that there were records that he was unable to repair.  I created a sfcdetails.txt (findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt'), but there is no listed in that document, *.dll files so that I could replace them.
  TL; DR - Windows Update does not work and problems with the mouse drivers, I guess. What files should I replace and how
  ?
  Sfcdetails.txt content looks like this:
  2013-07-19 10:17:09, info CSI 00000009 [SR] components check 100 (0 x 0000000000000064)

  2013-07-19 10:17:09, CSI information 0000000 transaction [SR] beginning verify and repair

  2013-07-19 10:17:12, information 0000000 c [SR] audit CSI complete

  2013-07-19 10:17:12, CSI to 0000000 d [SR] 100 audit information (0 x 0000000000000064) components

  2013-07-19 10:17:12, Info CSI 0000000e transaction [SR] beginning verify and repair

  2013-07-19 10:17:14, info CSI 00000010 [SR] verification complete

  (Often, with the exception of a few eccentric where the number isn't 100 :))

  2013-07-19 10:25:50, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)

  2013-07-19 10:25:50, CSI Info 000002ca transaction [SR] beginning verify and repair

  2013-07-19 10:25:53, 000002cc CSI Info [SR] verification complete

  2013-07-19 10:25:53, CSI Info 000002 cd [SR] repair 0 components

  2013-07-19 10:25:53, CSI Info 000002ce transaction [SR] beginning verify and repair

  2013-07-19 10:25:53, CSI Info 000002 d 0 [SR] full repair

  2013-07-19 14:02:35, CSI Info 000002 c 9 [SR] components check 88 (0 x 0000000000000058)

  2013-07-19 14:02:35, CSI Info 000002ca transaction [SR] beginning verify and repair

  2013-07-19 14:02:41, 000002cc CSI Info [SR] verification complete

  2013-07-19 14:02:41, CSI Info 000002 cd [SR] repair 0 components

  2013-07-19 14:02:41, 000002ce CSI Info transaction [SR] beginning verify and repair

  2013-07-19 14:02:41, CSI Info 000002 d 0 [SR] full repair

  Thank you

  TS

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/2700567/en-us

  Note If the computer had Windows pre-installed, see the manufacturer's documentation for how to do an upgrade on the spot.

  Note We recommend that you back up all personal files. For more information about how to back up your files, go to the following Microsoft Web site:

  I hope this helps.

• How to save install them all the updates that Windows Update downloads and installs automatically (when the automatic update is enabled).

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  My automatic update of Windows 7 did a great job, whenever I discovered a new criticism / or useful update is available on the microsoft site / or any other tech site, I always find the update is alreay installed via Windows automatic update (thanks microsoft)... but I want to save all these (the installation program updates (, of course) that I can use to update all the other windows 7 running pc with no internet connection.

  is this possible?

  Updates automatically downloaded cannot be reused. Suggest you open the link "View update history" of the icon of the Windows Update control panel and write updates have been downloaded and installed.
  Then download and save them from the Microsoft Download Center .
  Just enter the number in the field to Search All Download Center and then click on the "magnifying glass" to start the search.
  You can also change the language and geographic location by clicking on the link edit in the top right of the page.
  MowGreen MVP Data Center Management - update of safety Consumer Services

• WINDOWS UPDATES AUTOMATIC @ SHUT DOWN MODE AND THEN MY COMPUTER IS NOT WORKING WHEN I TURN IT BACK

  Wow, I thought that I already asked the question. ??? I recently re - set up my old computer from last year. Everything went well on it. All my programs, files, photos, email and internet wall works very well. I went to shut it down and Windows Update popped up indicating not to touch or power off the computer turns off automatically after Windows updates were installed then... There were 22 updates installed by Windows Update and the computer is down. I waited for 6 or 7 minutes and turned on my system back to see nothing load, my monitor screen educated on and said to go to sleep! If someone can tell me what Windows has done to my system. Why they ask me to pay for something that they obviously screwed and how to contact a live person who can help me with their question? PLEASE, ANY HELP IS GREATLY APPRECIATED. MY NAME IS ELIZABETH AND I CAN BE CONTACTED AT 228.385.0336. Thank you very much!

  Hi Elizabeth,.
   
  Check if the fix given in this link will help you in fixing the issue:
  The computer leaves not put into hibernation or does not Wake-on-LAN mode ensures
   
  I also suggest you to follow the steps in this article and the Coachman.
  How to solve the problems of hibernation and standby in Windows XP
   
  For more information on phone Microsoft support option, see:
  Support for Windows XP technical issues and troubleshooting

• Last night my PC Windows 7 got two updates automatic and afterwords when I try to log into windows.

  He tells me that the password is not valid - but I know that it is. I tried to use System Restore (using the disc of windows 7) and it said it was successful, but it still does not accept my password. I tried to restore back to December 6, however the password is still not accepted.

  Hi Joel_Schneider,

  Welcome!

  You can try the steps below, remove the updates by using the DISM tool and follow the steps below:

  1. start under System Recovery Options , and then select command prompt.

  2 from the command prompt, run the following command: Dism/Online/Get-Packages

  3. This will produce a list of updates installed and packets.  They will look like this:

  4. package identity: WUClient-SelfUpdate-Core-opLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226

  5. status: installed

  6 output Type: Feature Pack

  7. install time: 25/09/2009 12:02 AM

  8. find the most recent and then make a note of the name of the package.

  9 then run: dism/Online/Remove - Package PackageName:WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226(name of update from previous step)

  10. restart your PC.

  11. you want to start with the most recent and remove them one at a time to find the update problem.

  For more information about DISM, go to the link below:

  Maintenance packages from the operating system command line options: http://technet.microsoft.com/en-us/library/dd744311 (WS.10) .aspx

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.