Windows Vista calendar says access denied... disabled?

Similar Questions

• try to update to windows xp, but get access denied and also error code ox80004002

  Salvation had to reinstall Windows xp with service Pack 2, when I try to update to windows xp, it says access denied and also get error code ox80004002, windows service pack to be installed help please to solve this problem.

  Hi thanks for your help, but did a clean install of windows xp, seems to be ok now, it was marred by the comodo firewall uninstall that took parts of windows xp with him, leaving unstable.

  Ray

• When you partition the HD (VISTA), Manager of disk logic box says access denied

  Vista Home Basic operating system

  I'm trying to partition the HD to install Windows XP and run a dual boot on the existing Vista.

  Using administration tools - disk management computer management

  Right-click on the C: drive to shrink, and the dialog box logic handler says 'Access denied'

  All suggestions will be welcome.

  Thank you.

  TC

  Hello

  Appropriating the C drive:

  a. right click on the folder you want to take control and then click Properties.

  b. click the Security tab, click Advancedand then click the owner tab.

  c. click change. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click on the name of the person for the property.

  e. If you want that this person is the owner of the files and subfolders in this folder, select the check box Replace owner of subcontainers and objects.

  f. click OK.

  See also: http://windows.microsoft.com/en-US/windows-vista/Can-I-repartition-my-hard-disk

• I can't view an email... say access denied on this server. Is it VIsta or Norton?

  I got an e-mail from a line that store when I try to open it says access denied on this server.  Only on the desktop not on my laptop.

  Can anyone help?

  Highlight the message and click file | Save as and save it to the desktop.  Then try to open it and see if you get the same question.  It sounds as if it was Norton.  You can also right on the file on the desktop after I saved it and then go open with and open it with Notepad and allows you to read to some extent.  But Norton and Windows Mail have never gotten along well (see www.oehelp.com/OETips.aspx#3).

  Steve

• When I go to build the disk I get an error from Adobe that says "Access denied", just as I have upgraded to Windows Pro 10.

  When I go to build the disk I get an error from Adobe that says "Access denied", just as I have upgraded to Windows Pro 10. I went to another computer Windows 10 and it burned it perfectly.  Has anyone encountered this error in 6 yet?

  Make sure that you run 'as administrator'.

  A mistake that occurs between the different versions of still and OS. Note where I can access my notes.

• Trying to file share two computers that are running Windows XP, but every time I go into the network working group, that it says access denied.

  original title: HELP!

  Trying to file share two computers runing xp but whenever I go to enter the network working group, that it says access denied

  http://helpdeskgeek.com/Networking/connect-two-computers/

• My computer says ACCESS DENIED when you try to put the values by defect of security + Itunes glitch thing? I need help?

  My computer is says ACCESS DENIED

  When I tried to do: http://support.microsoft.com/kb/313222/en-us

  This is the error I got! : (Sorry, really long).
  Monday, September 6, 2010 11:45:33
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-1141220282-763679081-1401190266-501.
  Configure S-1-5-32-555.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.

  Group membership configuration was completed successfully.

  -Configure the 64-bit registry keys...
  Configure users\.default.
  Configure machine\software.
  Configure machine\software\classes.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aa of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.aax of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\ of construction. AMR.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.bwf of construction.
  WARNING 5: Access is denied.
  Error security descriptor for machine\software\classes\.cel of construction.
  achine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied.
  Error setting security on machine\software\classes.
  WARNING 5: Access is denied. (says this error ABOUT 1 000 times, I had to delete if it is not published on long!)
  Error setting security on machine\software\classes.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\classes\Wow6432Node.

  Configuration of registry keys was completed by one or more errors.

  -Configure the 32-bit registry keys...
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\wbem\mof.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.
  Configure c:\windows\syswow64\export.
  WARNING 2: The system cannot find the specified file.
  Error setting security on c:\windows\syswow64\export.
  Configure c:\windows\syswow64\ias.
  Configure c:\windows\syswow64\wbem.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\cachedlogonscount machine.
  Set up the nt\currentversion\winlogon\forceunlocklogon machine.
  Set up the nt\currentversion\winlogon\passwordexpirywarning machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\limitblankpassworduse.
  Configure machine\system\currentcontrolset\control\lsa\lmcompatibilitylevel.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminclientsec.
  Configure machine\system\currentcontrolset\control\lsa\msv1_0\ntlmminserversec.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionpipes.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\disablepasswordchange.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\maximumpasswordage.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requiresignorseal.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\requirestrongkey.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\sealsecurechannel.
  Configure machine\system\currentcontrolset\services\netlogon\parameters\signsecurechannel.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  When I tried to solve this problem: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/9d71a399-d168-43ec-8083-673f5258d09c?ppud=4

  I can't back up my files anywhere that it says access denied :(
  

  Also, WHENEVER I open itunes windows must reconfigure and change all my default settings but my music is still there! It says itunes reconfiguration and it still load and say that is is to install itunes?

  I really need help please

  Hi mewlar101,

  You run the computer as an administrator?

  Step 1: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Now, check if you can back up your files

  Step 2: Check with another profile for the Admin user

  If you do not have a different user account, you will need to create a (see link below). If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  On your problem of ITunes, you can post your query on the discussion group by Apple for more specialized help

  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why backup says "access denied"? It has not worked in a month!

  Last backup that worked was May 12. Now, it says "access denied."   Why? How should I do? I had no backup since May 12. I backup on a 300 GB hard drive, which I just emptied.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         What is the full error message?

  ·         You run the computer as an administrator?

  I suggest you follow the steps in the link below:

  Step 1: Run the fixit available in the link below to reset the security settings default settings

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  If the problem persists,

  Step 3: Check with another administrator user profile

  If you do not have a different user account, you will need to create a.  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• In trying to open the log files in Vista, get the access denied error

  I can see the file but when I try to open it says access denied how open it

  Hello

  ·         You have set the file permissions?

  ·         Is this happening to a particular log file or all the files?

  I suggest you to see link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  It will be useful.

• I can not save pictures it says access denied

  I can not save pictures it says access denied

  In which folder you are trying to save the images (full path name please)?  It is C:\Users\\Pictures (which shouldn't give you a permissions problem, but it is possible) or is this another place?  Also, when you try to save pictures of (full name of path please)?  It's probably just a permissions problem.  You must grant you full rights and eventually take charge of this issue (or perhaps its parent or both folders if the permissions are inherited).  You may also use the advanced feature to adjust the special permissions that can be liimiting described on the homepage (it depends on the folder and what permissions are).  Here are some general guidelines for changing the permissions and/or ownership.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges.

  I have administrator privileges, but when I run CHKDSK it says access denied due to insufficient privileges. You have to invoke this utility in elevated mode.

  How can I fix it?

  Hello

  1. what prompted to run chkdsk on your computer?

  To work with this problem, refer to these methods.

  Method 1:

  I suggest that you disable the antivirus software temporarily and try to run chkdsk on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  You can check disk errors using the command-line of the system recovery options in Windows 7.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  To open the System Recovery Options, see the section: to open the menu system on your computer Recovery Options
  

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check if it helps.

• Conclusion of the problem and removing a file document 29191.htm, says access denied

  Carbonite is trying to back up my computer but stops saving a document called document 29191.htm.  We believe that it is located in a folder called "holder".  By pointing the mouse on the file, it says empty but trying to delete it Brigs a warning indicating that 5000 files could be deleted.  I am the administrator and cannot be opened said file. It says access denied.
  Now, I can not find the file.
  1. How can I find this folder called ' owner?
  2. How can I find and remove the 29191.htm of the document?
  Thank you very much
  Ken

  Hello

  I suggest you to remove all the temporary files on the computer

  1 clear the temp folder, follow these steps:

  a. click on start

  b. click on run

  c. in run, type %temp%

  d. remove all files and folders in the temp folder

  2 remove the contents of the temporary Internet files folder

  a. quit Internet Explorer and quit any instances of Windows Explorer.

  b. Click Start, click Control Panel and then double-click Internet Options.

  c. under the general tab, click on delete files under temporary Internet files.

  d. in the dialog box, delete the files, click to select the button Delete all the checkbox content offline and then click OK.

  e. click OK.

  3 run the defragmentation of disk on the computer. You can follow the procedure from the following link: how to defragment Volumes your hard drive in Windows XP: http://support.microsoft.com/kb/314848

• When I go to the customization of windows vista, it says: "error control panel of customization."

  Original title: Control Panel customization

  When I go to the customization of windows vista, it says: "Error of control customization panel" and below, it is said: "there was a problem loading of a predefined color."

  Why do you think that what is happening? How can I solve this problem?

  Thanks :)

  E-mail address is removed from the privacy *.

  Hi DanteFicca,

  1. how you try to access the customization? This occurs when you try to access personalization Control Panel or office?

  2. did you of recent changes to the computer before this problem?

  You can try to run a SFC scan to find all of the corrupt files and try to install the SP2 and IE 8.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Cannot access drive F:, message says access denied authorization.

  I have a hard drive from my old dell computer that uses windows xp.  I use it as an external hard drive, but when I try to access on the new computer with windows 7 it says access is denied authorization. How to get access.

  You need take possession of records

  http://www.mydigitallife.info/how-to-take-ownership-and-gain-full-control-permissions-in-Windows/

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner