Cannot access drive F:, message says access denied authorization.

Similar Questions

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  I just installed windows 7 and cannot open powerpoint. Message says that my anti virus blocking. I tried to update (AVG) but the computer indicates that the driver is not compatible

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  You posted your question in the AVG Free Forum? -Online http://forums.avg.com/ 
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot send emails. Message says "sending message failed because the connection to the server outgoing (SMTP) has expired. Is the fault with Thunderbird or BT?

  Cannot send emails. Message says "unable to send message because the connection to the outgoing (SMTP) server has expired." By default the SMTP seems correct. Any ideas how to solve this problem?

  Oh, we still think. Using anti-virus software? It scans your outgoing messages? Try to turn off the power; It can slow down transmission in order to trigger a timeout on the server.

• Could not update Firefox 15, sometimes there is an error message says 7zip "deny access to.

  Sometimes there's a 7zip error message says "deny access to" and no has still not updated to the new version.
  The installation in silent mode of exit process, and a lot of files in the firefox install directory have been added .moz-backup suffix.

  Thanks for your replies! But it did not help to solve this problem.
  I found by accident, it's all about the improper setting of the path cache.
  The path of the cache has been on the H drive, but the ramdisk changed on the F drive while there is no blade H more.

• Cannot delete the folder (access denied / authorization to administrator)

  Recently, after a good 6 months to give a fair chance to Windows 8, I decided to reinstall Windows 7 on my laptop. Installation went very well, no problems (it's the original operating system on this machine). When I installed 7 I didn't format my drive, and so all my files/directories have been moved to the Windows.old folder. I had already backed up everything so I tried to delete the record and was invited to give permission to the administrator. I clicked through and received the error message: you need permission from TrustedInstaller to make changes to this file.

  I know that this problem is everywhere, but before dismiss you this as a pointless post, that's what I tried (unsuccessfully) solve this problem:
  > Delete manually CMD with elevated privileges (no results, "access denied" after each item has been deleted in vain)
  > Turn off UAC (no change)
  > Delete using Shift + Delete to bypass the Recycle Bin
  > Add a DWORD value in the registry (UseSystemForSystemFolders)
  > Start in safe mode with CMD prompt, could not remove with CMD or via Explorer
  > Activate the hidden administrator account and remove using the Explorer/CMD
  > Change the folder permissions, raise my account permissions and creating a new user name or the group with my account with full access
  I spent the best part of 24 hours trying to solve this problem. I would like to avoid reinstalling Windows because I had already transferred 200 GB of data on my computer before I realized it was a problem. Any help to fix this would be greatly appreciated!

  Thanks for the reply. I totally forgot to include Unlocker on my list of failed attempts. It has disabled a lock that was in place, but has not changed and he could not remove the file. I tried to move the folder into a zip file too, so I could delete just that but while I am able to move the folder on my drive hard I can't move it to a zip archive.

  =========================================
  Sorry, I thought that Unlocker is worth the try.

  After all, you tried, I doubt that the following articles
  would be useful but they both recommend the disk cleanup.

  Windows 7 - How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

  Windows 8 - How to remove the Windows.old folder
  http://Windows.Microsoft.com/en-us/Windows-8/how-remove-Windows-old-folder

  Since you have all your files backed upward... would not be a pure
  install Windows 7 will be the best bet instead of agony
  on this issue?

• Cannot burn CD error message says: "Please insertdisc.

  Original title: Windows media player does not recognize no verbatim disc Error Message says "Please insertdisc" when I try to burn

  Error message says "Please insertdisc" when I try to burn a cd.

  Hi PHILALDOUS,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Cannot run microsoft outlook; message says use Inbox Repair tool (scanpst.exe) how can I do? In addition, how to restore windows media player; the program name is missing from the selection list.

  Message says:

  C:\users\deaconmike\appdata\local\MicrosoftOutlook\Outlook.pst

  Quit Outlook and all mail inabled applications, then use the repair tool Inbox (scanpst.exe) to diagnose and repair errors in the file.  For more informaion about the Inbox Repair tool, see Help.

  Hello

  1. from which the program (Windows Media Player) selection list is missing?
  2 have you checked in the Windows features?

  I suggest that you follow the steps mentioned below.

  Step 1:

  Check if Windows Media Player is disabled in Windows Features.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Step 2:

  I suggest that you run SFC scan on your machine to verify if this is related to missing or damaged system files.

  As regarding problems with Outlook, I you should post the question in the forums of Outlook.

• Cannot download incredimail. Message says ' windows install not available ' what can I do?

  Impossible to download incredimail... message indicates that windows setup are not accessible?

  Hi DonB_1273,

  1. are you able to correctly install the other applications?

  2. don't you make changes on the computer before this problem?

  3. you receive this error message during the download or installation IncrediMail?

  You can follow this link & check if the problem persists.

  Error message "The Windows Installer Service could not be accessed" when you install a program in Windows XP

  Reference: How to install or upgrade my IncrediMail?

  Hope the helps of information.
  Please post back and we do know.

• just moved to El Capitan and now cannot update apps like message says I have either cancelled or never bought apps (they are iPhoto, that came with my Macbook

  I need to update my applications for iPhoto, my printer software and iMovie, the message I get is that I have to be cancelled, or never bought these apps, well, I didn't cancel them I use them all the time and I have always had them, then, why the error message?

  Apple develops is not iPhoto. It has been replaced by a new application that is installed with OS X. You will find the new app in the Apps folder. It's called pictures and works with its equivalent in the iOS on iPhone and iPad.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

• Cannot open microsoft word. message says I have dialog boxes open and close. Help please.

  I would like to send a resume "and I get this message on microsoft word.

  What happens when you hold the Ctrl key and that you try to open Microsoft Word?

• I'm changing profile of another person on my computer in administration but I get this annoying message saying permission denied. Can you help me?

  I need to know.

  Hi MannyKing,

  -You try to change the type of account using an account administrator privilege?

  -Are you connected to any server or any network?

  If so, contact the system admin of the COMPUTER Department of the respective to do the same.

  If not, enable the built-in Administrator account and check.

  The built-in Administrator account is hidden from the home screen when a user has privileges to administrator account exists and enabled. In Windows XP Home Edition, you can connect as administrator integrated mode without fail only. For XP Professional, press CTRL + ALT + DELETE twice at the home screen and enter your administrator password in the classic logon window that appears.

  Thank you!

• Access denied drive C, cannot change default permission

  I use assembled PC AMD X 4 while trying to change permissions of folder I did something wrong and now I am unable to access drive C-
  Access denied to the C drive, not yet able to access C: > properties > titles > Permission or Effective permission.
  Unable to change permissions,
  The system to boot normally, but in the properties of the drive C its display of 0 (zero) bytes,
  I am not yet allowed to create / copy any file on my desktop.
  Most applications open, which are installed in the system, for example: MS Office does not, Adobe Reader not working, utorrent works not, CC Proxy doesn't work don't not... error code:-0x800704b3
  Just trying to change the permissions for the C: error message "cannot open access control editor. Access Denied»
  Please help me...

  With the current flawed system, I am not able to do the repair CD,
  Make a CD of repair in another system with the same config - will this work?

  Yes - why don't give you it a try?
  If you have 20 GB of very important data on your hard drive, then there is an urgent need for you to review your backup strategy. This is a question which must be addressed before a disaster occurs, not after.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357