Windows Vista does not start or repair

Similar Questions

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Windows Vista does not start, turns to a blue screen error 2203

  original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

  Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

  So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

  "I tried to do the second option, because the first really helped."

  Something works, or it doesn't work regarding: "really helped."

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You may be interested in this:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

  Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

  Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

  Can someone give a help?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not start at startup

  I have a Dell Inspiron 1525. My wife uses mainly the laptop for access online, certain professional activities (Word documents, spreadsheets) - nothing major.

  Today, after starting the Dell system, the laptop would not boot correctly. It would have wrapped after the Windows flag and never completely boot. What I have done so far to try (unsuccessfully) the question of setting:

  (1) launch Startup Repair (recommended) - no resolution

  (2) Ran Dell Diagnostics - received error code: 2000-0333

  (2) selectable repair your computer from the Advanced Boot Options and attempted a system restore - it has failed because of an i/o device error (0x8007045D)

  Not sure which is precisely the problem. Please help to troubleshoot and resolve this problem.

  Thank you

  D

  Hello

  Follow these steps using the Dell diagnostic process, especially by pressing F12 at startup.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266787

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  If Dell information does not resolve the problem, you may need to reinstall the operating system.

  See you soon.

• Windows Vista does not start. I can just buy the upgrade to Windows 7 to fix this or do I have to purchase the full version of Windows 7?

  update helps... Difficulty helps lol

  I have vista Home premium, but does not start it tells me to put my disk installation and repair process. can I buy windows7 upgrade or should I buy the full version, I'm not going to do...? I got my pc checked thourghly and everything is running perfect

  Please use the Vista system repair and recovery forum to fix your departure upward.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

  Yes, as long as Vista is still installed on the hard drive you can use a copy of Windows 7 upgrade to upgrade your computer but you will need to boot the computer with the Windows 7 dvd and perform a custom installation.  Which will remove all your programs and data so there will be very practical backups.

  The best option is to repair Vista first.

  Before dismiss you the idea of buying a copy of the full license of Windows 7, remember that it would be transferable to a new computer much more easily that an upgrade copy is.

• Windows vista does not start try the recovery disk and nothing

  I have a pavilion hp a1712n with windows vista starts not tried the disk recovery and nothing, it sounds like it is stuck in mode 'sleep'. I can hear it loading but it dosnt take the cd/dvd drive, I tried unpluging the drive to see if it will continue to load, but it didn't. I can not use the key to go into bios Board or something, all ideas given lose don't are not important computer been gave me this problem, so if there is something that I can do but personal files will be lost is very well thank you all

  Hi scoobydoochick,

  1. what recovery disc do you have?

  2. you receive an error message?

  3. you see the computer manufacturer's logo while you start the computer?

  Looks like that there are some hardware failure on the computer that is preventing the computer from starting.

  Will need you a Windows vista installation disc as recovery are different from the install disc and restore disks are created by the computer manufacturer, we are not aware of its functions.

  Once you get the Windows vista installation disc, that you try startup repair by using the link below or take the local computer tech shop and the material tested on the computer.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista does not start in normal mode

  My Windows Vista-based computer does not start successfully in mode noirmal upward. I restart and it is very slow. Finally I can connect and my come almost all my desktop icons. Almost. At this point, it seems frozen. Left click and it becomes totally frozen, including the white frozen screen Milky wit the icons in a blurred background. At this point, I can nothing but disable it at the tower. Restore the system to an earlier point has failed. Any ideas?

  See...

  My computer is slow!

  http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html?

  List of troubleshooting for a slow computer

  http://www.bleepingcomputer.com/forums/topic44694.html>

  What to do if your computer is running slowly

  http://www.malwareremoval.com/tutorials/runningslowly.php>

  04/12 / 1107:23: 14:00

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Windows Vista does not start... Bad driver says Startup Repair

  I got a HP Pavillion laptop which was running Windows Vista.  Unfortunately the motherboard met tragic disappearance and so I decided to just get a new laptop (A Toshiba Satellite L505D).  I had the Geek Squad to do a backup of the HP hard drive, but when I went to save the Toshiba before the upgrade to Windows 7, I discovered the system files on the external hard drive, they gave me has been altered.  I thought I had everything comes from the backup I needed, then (stupidly without checking double) I've reformatted this drive to use for the new backup, eliminating the old backup.  I then realized that I had never recovered the video files I had stored there; However, all these files are still on the old hard drive, which was not damaged.  I decided to swap hard drives (two SATA disks) in the Toshiba and restart it with the hard disk of the old HP.  Windows wouldn't start, and when I launched the Startup Repair he identified the problem as a bad driver.  What should I do now?

  You cannot boot from the hard drive HP in a Toshiba computer, because it has not installed the motherboard of Toshiba drivers and does not recognize Toshiba motherboard he found.

  Try these methods for data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista does not start, not even in safe mode

  I have a HP desktop computer comes with Windows Vista installed on it.  I have no recovery discs, I have a hard disk recovery partition.  I can't start in safe mode.  I ran startup repair, tried restore points and even tried a complete pc restore, nothing works.  I am still unable to start Windows, even in safe mode.  Here are my coordinates of startup repair problem.  Can you please point me in the right direction?

  Problem event name: Startup Repair V1

  Signature of the problem 01: Auto failover

  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386

  03:6 problem signature

  Signature of the 04:655370 problem

  Signature of the problem 05: installation failed

  Signature of the 06 problem: no boot failure

  Signature of the problem 07:0

  Signature of the 08:0 problem

  Signature of the 09 problem: unknown

  Signature of the 10:1168 problem

  OS version: 6.0.600.2.0.0.256.1

  Locale ID: 1033

  Thank you!

  Traci

  If the HP recovery process does not work, it seems to be a hardware problem.

  And now that you mention have a blue screen.

  If it was a software problem, the process of HP recovery to reinstall the operating system should fix (take it back in new condition).

  And this new condition would exclude any incorrect hardware drivers may have installed the original problem.

  Have you tried HP support?

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or assistance HP Forums:

  http://h30434.www3.HP.com/

  See you soon.

  Edit:

  HP recovery process, you get the possibility of a destructive or non-destructive restore. If you use non-destructive recovery option, often have the same problems continue.

  The problem continues when you use destructive recovery too.

• Windows Vista does not start. The BIOS loads then black screen with blinking cursor.

  So my friend told me that his PC was not working. When you press the power button on the pc, the screen of the Dell BIOS load but instead of starting then Vista it shows just a black screen with a blinking cursor. Still, the BIOS detects the hard drive and has the ability to boot from it, but it just that again. I tried the recovery disk windows, and when you click on the "Repair" option when it loaded usually shows a list of the operating systems installed and their hard drives. There is no listed on the Vista recovery cd. Manually, you can browse and find the partition from the OS than its sequel, and clearly see the windows directories. It all simply not start, nor let the recovery disk to fix it because the operating system is not detected. I plugged the hard drive on my pc with the same results. Then I started my Win 7 and Explorer, disks and partitions are once again still visible with the appropriate directories. Windows says the drive is working properly and has no file system errors. When viewing in the hardware Manager, he says it's healthy (primary, active partition). My hard drive working correctly says healthy (boot, pagefile, primary partition). Why used it boot and why the recovery disk not recognize the operating system and how can I fix it or do I need to format and reinstall vista?

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

• Windows Vista does not start to change from IDE to AHCI in the BIOS

  Hi, I spent a lot of time to look at this problem online. I can't find a lot of google search results and they seem to say enter REGEDIT and change the "msahci" start to 0 and even the 'pciide', or 'iaStorV' start parameters to 0. But this does not work for me. The loading Windows with the loading bar screen Green just continues to go wrong and never Windows startup. I have Windows Vista Home Basic Edition.

  I saw someone in this forum with a similar problem but they have upgraded to Win7 on a new installation to fix the problem, they spend on AHCI RAID. I contacted Intel technical support and they said to try HP or the manufacturer of the motherboard. I contacted Intel because I installed a 520 Intel Solid State Drive series and wanted to know if they had a driver to get the benefit of the AHCI instead of the IDE. I know that a lot of people recommend a new installation of Windows, but I don't have a Windows cd with this computer (my computer is here: http://support.hp.com/us-en/document/c00835809 )

  I tried to install this Microsoft fix too. http://support.Microsoft.com/kb/922976

  I wonder if there is an AHCI driver, can I install it or what I can do to get the job of AHCI?

  Thanks to anyone who can help!

  I suggested that you create disks because you said that the computer came with any one and you could not re - install Windows as suggested a possible solution. With these records, you can the recovery of the system back to a factory State. Since you want to install a SSD or change a BIOS setting, these are the changes which can damage the system and require the use of recovery disks.

  If you want a Windows Vista 'clean' no HP Setup, please see Paul's response in this thread of the forum called "System Restore not working not not for HP Media Center Desktop PC. According to his instructions is expected to create a bootable Windows Vista installation disc. My only amendment to this method, is not to use the product key Microsoft Windows Vista on the COA on the side of your computer. Instead, I would like to "Save" the product key from factory OEM HP and HP OEM certificate using ' the Activation, backup and restore ' then 'restore' the certificate and the key to the new clean install of Vista. This will result in an installation clean factory activated that does not require Microsoft to activate. Be aware that the software HP added value will no longer be on your computer. If you want to use this software, you MUST create your personal HP recovery disks and copy the "SWSETUP" folder on your current installation of factory to an external support.

  Re-install Windows Vista, as shown above with the SATA BIOS settings set on AHCI you like will work 100% of the time. It should also install to SSDs, where HP recovery discs are known to fail.