Windows vista home cannot start

Similar Questions

• Windows Vista Home cannot access the internet - I tried ipconfig/flushdns, returned message "requires a rise."

  I have built in wireless antenna on my Dell s3120n, which is connected to a modem 7500 Westell, internet remote access. Once I unplug the dsl cable I have only local broadband access, no internet.  Not sure if my wireless antenna work either (adapter wireless 802. 11 b/g), I downloaded the updated driver and installs to USB ports and antenna on my desktop but the ports will not recognize an inserted USB adapter.  Help, please

  Hello

  You can refer to the following steps:

  Step 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Step 2.
  1. click Start and then click Control Panel.
  2. go in network and sharing Center , then click on change the parameters of the map.
  3. right click on Local area connection and choose Properties.
  4 Select Internet Protocol Version 6 , and then click Properties.
  5. click on DNS server automatically get an address , then press OK.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  I hope this helps.

• Windows Vista Home Basic Edition keeps looping and will not start

  Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.

  I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.

  Bill

  If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Is not start the BITS on Windows Vista Home Premium 32 bit service

  I'm unable to start the BITS service on my computer.
  I use Windows Vista Home preimum 32 bit OS.

  I tried the following solutions that I found here.

  (1) sfc/scannow
  Result:
  =====
  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  (2) delete the files qmgr0.dat and qmgr1.dat download/ProgramData/Microsoft/network directories.

  I also tried using BITS Repair tool downloaded from the microsoft web site, but no luck.

  When I start the BITS service, I receive the following error message.

  Please suggest me how to solve the problem.

  The service Background Intelligent Transfer Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Concerning
  Yannick DEVOS

  I tried to run the Norton removal tool.

  No luck.

  Finally, I reinstalled my OS. When I tried to restore using Windows restore, some applications do not work. Therefore, I have reinstalled my OS.

  Thanks for your great support.

  Concerning
  DeVos

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• Windows Vista Home Premium does not start after mother, CPU and RAM upgrade card

  I recently updated my PC Windows Vista Home Premium. I changed the motherboard, CPU, RAM and video card. When I booted the machine, it has not started Windows. Windows tried to recover, but could not. Is it possible to get this machine to start without doing a new install? The new facility will lose important files.

  Hello

  It's a normal reaction after replacing the hardware that you have replaced.

  The hard drive with the installed operating system contains the old motherboard drivers, etc..

  They must be replaced with the new motherboard, drivers etc.

  You will need to reinstall the operating system and then install the new drivers of motherboard (you should have a diskette of drivers for it), if the new installation does not probably them, that it will not...

  To backup your data > buy a hard drive USB enclosure > put your hard drive in it > plug it into another computer > read and copy your data from it in this way.

  See you soon.

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Unable to start the center of security on windows Vista Home Basic

  I have windows Vista Home Basic and I can't get the Security Center to start. I get messages saying that I have worms and trojans in my system, but my AVG antivirus found nothing after a complete analysis of the system. These threats don't exist and how do I get the Security Center to start?

  Hello

  AVG can't find everything

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Validation in Windows Vista Home Premium at the start: errors and complications.

  I was directed to this forum as a last chance for my situation.  I'll copy what I wrote before:

  First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.

  With that of the road, I'll try to explain my situation.  Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive.  So I ran a restoration of the system to an earlier time.  After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid.  They gave me three options:

  Reduced functionality mode (does not work; see below)

  Enter the product key

  Contact HP - do you have this: they wanted $ 100.

  Now before to get started by offering suggestions, you need to get more information.

  I can't use the reduced functionality mode.  When I click on it, an error with file not found window appears.  The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network.  So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.

  Now there is more.  Frustrated, I tried to follow guides anyway.  So I followed the following steps:

  Step #3 game

  (1) open Internet browser

  (2) Type%windir%\system32into the browser address bar.

  (3) find the CMD.exe file

  (4) make a right click on CMD.exe and selectrun as administrator

  (5) type: net stop slsvc (it may ask you if you are sure, click Yes)

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Typenet start slsvc

  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  (11) restart twice

  Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem.  Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).

  Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower.  I have no Dvd or Cd.

  I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows.  I have no idea what I'm supposed to do now.

  I used these links:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11

  and many others that I can't find my way.

  I am posting this from my laptop not my computer with the problem.

  Here is the link to the original thread:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471

  Is it possible that I can fix this?  Can I install Linux or something, just so that I can access my files?  Thank you.

  Hello
  
  Since you are concerned about the data on the drive, I suggest you first backup of data.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  I recommend you contact the manufacturer of the system to help about it.
  http://h30434.www3.HP.com/
  http://welcome.HP.com/country/us/en/support.html
  http://welcome.HP.com/country/us/en/contact_us.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Update in Windows Vista Home Premium to Vista Ultimate

  Hi all

  I'm trying to upgrade my windows Vista Home premium to ultimate and I have the original CD for the ultimate, but when I put the CD and to upgrade it won t upgrade and it gives me this message:
  "- The upgrade cannot be started. To upgrade, cancel the installation and choose it to upgrade to a version of windows that is newer than the version you are currently using. »

  And my computer is up to date so I put t understand is something to play or I have to install a clean version of windows Vista?
  And if I have to install a clean version anyway to install windows without deleting my documents?
  Hope someone will help me :D
  THX

  H,

  If you perform a new installation that will be wiped all files, you must back up your documents and other members of staff.

• KB2296011 causes the blank screen in Windows Vista Home Premium?

  I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

  I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

  I did the following to troubleshoot:

  (1) I tried to install the system update tool, which had no effect.

  (2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

  (3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.»  This service cannot be started in Mode safe. »

  It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

  OK, it looks like at this will be my last post.

  This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

  It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

  I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

  I hope that all of this novel, we have written here will help others as well.