Windows Vista-no dial tone for Magic Jack

If I turn off the computer, wait a few seconds then turn it back on, Magic Jack will have a tone for the County, (one thousand and one, one thousand two, one thousand thirteen), then it goes dead again. Thanks for your help

Hello

Make sure that your computer is connected to the internet and visit web pages just to test and verify that it works.

Step 1: Connect the Jack of the magic to another USB (Universal serial Bus) port, and then test to see if the problem persists.

Step 2: Download and install the latest Magic jack software and test it

If the problem persists, contact the manufacturer for known issues
http://www.MagicJack.com/4/customercare.asp

Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

Thanks and greetings

Ajay K

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • My genuine Window Vista could not search for the new update, or errors are: Code 80073712

    My genuine Window Vista could not search for the new update, or errors are: Code 80073712

    If you forget to say 'thank you '?

    Description of the update of the system for Windows Vista tool
    http://support.Microsoft.com/kb/947821

    0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

    TaurArian [MVP] 2005-2010 - Update Services

  • Windows Vista Service Pack 2 for update (KB948465) systems focus on x 64

    Hi all:

    For several weeks, I get a daily reminder to install the update "Windows Vista Service Pack 2 for x 64-based systems (KB948465)", but whenever I try to install it, it ends up by default, which gives 80246007 error code. What happened probably 30 times. It's driving me crazy, and at this point, I would like to know if it is still necessary to have. If this is the case, how can I get to install correctly? If this isn't the case, I can't the notification go away?

    Any help would be appreciated.

    Thanks in advance.
    -joe

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
    http://support.Microsoft.com/kb/967818

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I'll be able to restore the backup taken before improving the operating system of Windows Vista Edition home premium for Windows-8

    I'll be able to restore the backup taken before improving the operating system of Windows Vista Edition home premium for Windows-8

    Hi GOURGOPALGHOSH,

    Welcome to the Microsoft community. Yes, you will be able to restore the backup before the upgrade to Windows 8. Follow these steps:

    (a) press the Windows key + W.

    (b) type of recovering files of Windows 7 , and then press enter.

    (c) restore files.

    I hope this helps. Let us know if you need more assistance.

  • A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

    A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

    Hello

    I would suggest trying the following methods and check if it helps.

    Method 1:

    In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Method 2:

    Put the computer in a clean boot state, and then try to install the updates and check if it works.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Method 3:

    Try to download updates from the Microsoft Downloads Web site and check.

    http://www.Microsoft.com/download/en/default.aspx

    Hope the information is useful.

  • Windows Vista could not search for new updates (error code 1 800700)

    original title: Windows Vista could not search for new updates

    Windows Vista could not search for new updates.
    800700 1 error code.
    My Antivirus software is Bitdefender.
    What should I do?

    How long it has been since the system enabled to update?

    Which version of Windows Vista (32-bit or 64-bit) and service pack (1 or 2) level.

    When the system has been changed swept with the suite of security/antivirus installed, no matter what has been detected? If so, what, please?

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • Updated my computer to Windows Vista Service pack 2 for x 64 function foires systems

    Okay, so I have recently updated this Windows Vista Service pack 2 for x 64-based systems.

    After the update and restarting, I connected only to find myself staring at a blank white screen. However, I managed to hit the keys ctrl + alt + delete and go to the Task Manager to launch explorer.exe through the "new task...". ' button.

    This brings me to my normal desktop, but none to start startup programs and CPU usage is 100% which makes the performance of my laptop more slow.

    Sometimes I try to restart the laptop and it starts normally after the connection, but that happens only about 15% or less of the time.

    Is there a way I could resolve this problem and I function normally again?

    BTW,

    I don't have the CD of Windows Vista or install, so I can't really replace him.

    Thanks in advance for your help.

    Hi DaColossus,

    Method 1

    I suggest that you perform the system restore before installing Windows vista service Pack 2 on the computer.

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Method 2

    Once the service pack 2 for Windows vista is uninstalled from the computer, I would say that repair you system files on the computer by running SFC scan.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

    For more information please visit the link below.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3

    Now see the link below and try the steps to install Windows vista service pack 2 on the computer.

    Learn how to install Windows Vista Service Pack 2 (SP2)

    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My computer is Windows Vista and I pay for Photo Shop CS6, but it will not download. Can I download the CS5 and how?

    My computer is Windows Vista and I pay for Photo Shop CS6, but it will not download. Can I download the CS5 and how?

    Photoshop cs5 is designed to:

    Windows XP with SP3

    Windows Vista Home Premium, Business, Ultimate or enterprise with SP 1 (P2 S recommended)

    Windows 7

    Photoshop cs6 is designed to:

    Processor Intel Pentium 4 or AMD Athlon 64

    Windows XP with SP3 or Windows 7 with SP1

    CS6 applications support also Windows 8 and Windows 8.1.

    * Video features are not supported on 32-bit Windows systems.

    * 3D features are disabled and some features of mercury from the improved graphics engine may not work with less than 512 MB of VRAM. Read the Help section.

    If you just buy CS6, you might be able to get a refund, but Adobe sells more software CS5. Is it possible to upgrade your computer to make it compatible? Here are the system requirements for photoshop:

    System requirements | Photoshop

    Guinot

  • Why can't I download hearing CS6 for Windows Vista? I did for my PC.

    Why can't I download hearing CS6 for Windows Vista? I did for my PC.

    Well:

    1. you can download.

    2. you should be able to install it using compatibility mode.

    If you have problems with 1. using adobe cc, you can download it here if you follow the 7 steps: http://prodesigntools.com/adobe-cs6-direct-download-links.html

    and activate it with your serial number.

    If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  • Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

    Hello

    Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

    I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

    See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

    Any idea?

    Hmm... it's strange?  :|

    The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

    I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

    However, the deal seems clear don t install if the pilot is not designed for your operating system.

    Concerning
    …

  • Need driver VGA Windows Vista Ultimate 64-Bit for Qosmio G40 - 11 d

    Please, I want to know how to get the driver for Windows Vista 64 - bit for my Qosmio G40 - 11 d because I can not find in Toshiba driver downloads or N-vidia.

    Consult laptopvideo2go (dot) com - they got modded drivers nForce who will probably walk!

  • Update for Windows Vista Service Pack 2 for x 64 systems (KB948465) _

    Whenever I try to update Vista Svc Pack2, she says that it has completed successfully. When restarting the laptop he spends 1 out of 3 in which the 1 configuration ends then start the 2nd and gets 1%, it restarts again and comes back with an error message. I have to shut down the computer and then the computer performs a check to boot. Before you try to download the Pack of Svc 2, I have no questions, now my taskbar in the taskbar volume goes down by itself, it does not play any disk, cannot download attachments (adobe), among other things. According to me, trying to download Service Pack 2, it has corrupted systems as if it has a virus. Please can someone help me with this, it's very annoying.

    Please answer questions following diagnosis by number in your next reply (no need to quote this post):

    1. is Vista SP1 is installed?

    2. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    3A give Norton or McAfee application already installed on the computer?

    4. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    ===========================================

    Free unlimited installation and compatibility support is available for the Windows Vista SP2 problems. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 and select the appropriate category (e.g., download problem, installation problem;) Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Vista Service Pack 1 for systems x 64 (KB936330), did not finish download. Error message 80091007

    I just replace the memory of the motherboard, processor and ram in this system, I did a fresh install of Windows Vista Edition full. Now I get these errors which began with the .net error is not able to install. I went and downloaded .net 4 for stand alone, and very comfortable. Seems that when you use the Windows Update is when I have problems. Why do I start having these issues now? What can I do to fix this? A new disc of Vista Ultimate would repair my problems or is it the way the system is windows reading?

    Download and install 'SP2' manually because it contains all SP1 fixes: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • In my list of windows update, I have 2 entries that say FAILED to "Windows Vista Service Pack 2 for x 64 systems (KB948465).

    I don't have any other try to install SP2 I can find in my history of update.  But "View basic information about your computer" says my edition of windows Service Pack 2.

    I went to the download section to download the SP2, and I clicked on RUN.  As far as I can tell, after the download is finished, he did nothing.

    ... "See basic information about your computer" says my edition of windows Service Pack 2.

    So don't worry about these "stranded" lists

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • stepupgrade windows vista business Japanese version for windows vista Ultimate edition

    Recently, I bought a laptop in the Japan. The operating system is Windows Vista Business Japanese Version. I'm not familiar with the Japanese language and because of that I wanted to change it to English. I had discovered to find the way to put in place, but I found there was no way else to solve except buy a new Windows Vista with English Version or mine upgrade to Windows Vista ultimate. And I want to ask a question:
    1. is there anything else beside what I mentioned above?
    2. If I decided to buy a Step-Upgrade Vista Ultimate DVD Business, should I buy with the same language version with my Vista business, Japanese Version? Or is it fine with Step-setting level Vista Business to ultimate DVD English version anyway?
    3. Please show me how to change the display language after upgrade my Vista to Vista Ultimate!
    3. in the future, if there is a problem that I have to reinstall the OS, this DVD of Step - update allows again?

    Thank you for your attention.
    I'm sorry, my English is not good enough, I hope that you will understand my questions.

    Best account.
    Louise

    Change language:

    1. to change your Vista professional Japanese language to English, you can buy a Japanese Vista Ultimate Upgrade disk/license.

    Then download the English language through Windows Update as an option Pack.

    Vista Ultimate upgrade must be done in the original language Vista came.

    2. your other Option is to buy a FULL Vista Business English version and do a clean install.

    3. If you want to reinstall, you need the original installation of business > Ultimate upgrade > re-download the optional updates in Windows English Language Pack...

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • How can I access the music apple on my apple tv

    I can access the music on my phone and the laptop, but not on my apple tv apple. all are signed in with the same iTunes apple ID and password.

  • HP Envy: the NVida driver update

    HP sent me a driver update that dutifully, I installed and now my computer screen keeps going on and outside. What should do?

  • His driver error - HDA bus driver is required and not found

    Original title: I downloaded the audio driver for windows xp proffesional and when I install it it say had bus driver is required and not found what I need to do. Please can u help the model of my Tower is hp compaq dc7800 cmt pc while using the soft

  • I can't copy files or pictures on disk.

    Ideas: I can't copy files or pictures on disk. In "My pictures", for example, on the left side under 'images', it was the option 'Copy this image to CD', or something very similar. This option is gone. Same problem in all files and folders - under "f

  • Missing Windows Vista Theme

    Under theme settings, I have only Windows Classic. I used to have Windows Vista, but now he isn't. What can I do?