Windows XP does not start because < root Windows > \system32\hal.dll file is corrupted
I get the following error message when starting my windows XP Home PC. : Windows didn't start because the following file is missing or damaged
This could be the result of a corrupt / missing hal.dll file or boot.ini file. You have your windows disc? If so, follow the instructions below. If you do not have your windows disk click HERE to create a disc of windows recovery console.
Enter load identifier: Enter operating system load options: After completing the previous steps, restart the computer, and then select the first item in the start menu. This should allow Windows XP to start normally. After Windows XP is successfully loaded, the Boot.ini file can be modified to remove the incorrect entry. Tags: Windows I used the Norton Utilities 15 on my Win XP = done many times with no problems, this time however she appeared with
I have no Win install drive as it came preoaded on my computer. Is there anywhere I can get this file to replace or am I stuck with my recover the DVD file erase all my personal files/photos etc.? Hi KevinHassin, (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine. (b) thereafter, follow this link & check if you are able to start correctly on the desktop. Hope the helps of information. My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please? The file is missing or corrupt is one of your files in the system registry. By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD. Once you create the CD, and then start your system of problem with this CD. In the first window, select "Mini Windows XP" and wait for the system to start. When it starts, go to the Hirens Boot CD menu and select When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system Also, this error is almost always accompanied, if not caused, the corruption of the file system. Also a good idea to perform a check disk (chkdsk) operation with the option "repair". The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console) "How do I recover from a corrupted registry that prevents Windows XP boot" HTH, I have a new computer running windows but 10, 13 photoshop elements disc. Insert the disc does not start something going and looking at the files I do not see an installation executable. I don't know what to do. Download from Download Photoshop Elements | 14, 13, 12, 11, 10 Install and enter your serial number. Firefox does not start because he says that it's another instance that runs in the background, but I checked and it is not a! I have Linux Fedora 15 and I'm not the root. I spoke to the Manager and he said I should delete a file in the folder where firefox is installed and which can solve the problem. Can you help me? Upgrade your browser Firefox 8 and check my computer is not let me finish my system recovery it says windows does not start because the followingfile is missing or damaged \system32\hal.dll. of Hello I suggest you try these methods and check the status of the issue. Method 1: Start your computer in last good known Configuration. Using the last good known Configuration. Method 2: If the computer cannot start in the last known good Configuration, try to start the computer in safe mode. Step 1: Start your computer in safe mode... Step 2: If the computer works fine in safe mode, restore the system to a system restore point when the computer was working fine. How to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084 Note: Undo system restore does not work when the system restore is called safe mode. Have the XP Pro Service Pack 1 2002 reinstallation CD disk that does not start. most recent service Pack installed through updates. Have the CD Drivers and Utilities from Dell 2005 "you must boot from this CD to run diagnostics, that may involve changing your computer's boot sequence. See the manual of the owner for info. I have my product keys. Last week, I installed Norton 360 4.0. I am away from home long visit because of family illness. These disks were in my computer bag, but I don't have resources. I'm accessing the internet from another PC. I appreciated any help in getting my computer to start again. Thank you. Hi Sissi77350, · What is the model number of the computer? You must have the Windows XP CD to perform one of the steps to start the computer. See the links below: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477 With regard to: Samhrutha G S - Microsoft technical support. Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Hi FRANKGRIMES_945, What is the model of your computer? (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine. (b) thereafter, follow this link & check if you are able to start correctly on the desktop. Hope the helps of information. What can I do with this message: Windows didn't start because the following file is missing or corrupt:
Thank you In Windows XP: http://pcsupport.about.com/od/findbyerrormessage/a/missinghaldll.htm In Windows Vista & 7: http://pcsupport.about.com/od/errorh/a/HAL-dll-missing-Windows-7-Vista.htm In addition, if the file is actually missing, you can try to boot from a UNIX / Linux Live CD like Knoppix and add/replace the file manually with a file from another PC running THE SAME VERSION OF WINDOWS! If you are not good with computers, you should ignore this option because it could cause serious problems. If you still want to try, and there is a hal.dll file in
Let us know if it works. I downloaded a virus on my computer that wouldn't let my computer startup message wasn't
Paul_652 What a mess! file HAL.dll It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose? It depends on your hardware, but it is extremely likely that the problem (did I already say that?). I've never had to replace a file hal.dll for this problem. The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted. For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top. If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too. You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go. For example, method 1 will not work if your system does not start. You may have more luck with other "methods". If that doesn't work, then I suggest to provide a little more information about your system: Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues. Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible. Provide information on your system, the better you can: What is your system brand and model? What is your Version of XP and the Service Pack? Your system have IDE or SATA disks? Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc.. The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.) The afflicted system has a working CD/DVD (internal or external) drive? You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)? If the system works, what do you think might have changed since the last time it did not work properly? Client DHCP does not start because of the dependency Suddenly my laptop IBM T61 Windows XP sp3 Pro link is more to my Belkin router either wired or wireless. This started after I hosted a series of Windows to perform updates. Using the command ipconfig and other signs, it seems that the DHCP process no longer occurs. Research in Non-Plug-and-Play Device Manager, I could see that there was a yellow flag next to 'netBT' which is a dependency for a number of services such as DHCP. Windows suggested I uninstall and then reinstall the netBT.sys "driver". Well, it uninstalled OK but it is now out of the list and without him in charge I'm cut network (I have a Vista laptop second Home that I use on the lookout for ideas tech). I moved a copy of netBT.sys from the SP3 i386 folder in system32\drivers to replace the old, just in case. SOLVED. NetBT corrupt registry entry. HKLM\system\currentcontrolset\services\NetBT Jim in Arizona I get the message "Windows cannot start because the following file is missing or corrupt" If the computer is not currently bootable, Then, you will need to borrow an xp installation cd to start the computer and run some commands through the function of the CD recovery console. Another option, to remove the hard drive and install it as a slave on a functional computer disk. then use this functional computer and the o.s. to fix the problem on this slave drive. Another option is to see if dell experts have a different methodology to fix the error. There is a community forum to dell.com dell, where you can ask this question. in all cases, the question you have is not uncommon and has been requested and answered thousands of times. Here is more information about this: original title: a little too technical for me this answer... I have this message on my desk:
But according to the ansver on the support line, it is too technical for me, I put the CD rom and pressing the "F2" on the keyboard it lead me to a blue page with 3 columns, vertical on the left side with a menu to select with: System, readers, devices on board, video... so onon the system one I tried the boot sequence but get stock there. I don't know if I took the right track! Can anyone help please? WINDOWS COULD NOT FIND START BECAUSE THE FILE IS MISSING OR DAMAGED This message is rather misleading. It happens because the boot.ini file that tells where to look for 'Windows' boot is damaged, so it is looking for the files in the right place - hal.dll is be the first person he's looking for. Set the BIOS to boot CD before the hard drive. Start the XP CD and at the installation site, take the immediate R for repair. Assume that any requested password is empty. At the command prompt, type: H r s C:\boot.ini attrib [press Enter] Remove the XP CD and hopefully restart Windows. MS - MVP - Elephant Boy computers - don't panic! A "highly recommended" malware free program apparently deleted a file system. Stuck in Dock after update OS 10.11.5 symbolic link icons I've recently updated to OS 10.11.5 on my Macbook Pro 13 "retina and has a problem with symbolic links. Everytime I open a symbolic link pointing to an executable file within a packet of dot - app (or open it directly), the icon remains in the dock e How to upgrade my ATI HD2600 graphics card driver? I got this new driver can I update to a new version of the bios and a screen which is the version for my hd2600 8.432 (8.383 now).But how exactly do I do this? I first have to uninstall my old ati driver or can - I have just install them on it? Satellite L350 - access code for the router Dear Sirs I have a Toshiba Satellite L350 under Windows 7 Ultimate. For the first 5 months, he remembered the wireless to the router access code. I then installed a BT Home Hub which I subsequently removed and then the Windows 7 machine will remember 2 * hp 1212nf mfp scaners lj I have 2 hp 1212nf mfp with ip lj (1) 10.0.0.2/24 gw 10.0.0.1 (2) 10.0.1.2/24 gw 10.0.1.1 and 10.1.0.2/24 gw 10.1.0.1 and win2003 Server (tested on XPsp2, XPsp3, Win7) After installation 1st mfp server ip - everything very well. all works: printing, I have a question to ask the warranty by filling a form of diwali flipkart. me, what is the product code and the name of the partner simply clear?
[Type Y in response to this message.]
[This is the name of the operating system. Type Windows XP Professional or Windows XP Home Edition].
Leave this field blank, and then press ENTER.Similar Questions
Please post back and we do know.
Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
Hirens CD burning <> http://www.hirensbootcd.org/burning/ >
Register-> Registry Restore Wizard.
then follow the prompts. This wizard will return a copy of your registry database from backups that are stored with your system restore points. After the restoration, stop, remove the CD and restart.
"How to restore Windows XP to a previous state"
<>http://support.Microsoft.com/kb/306084 >
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >
<>http://support.Microsoft.com/kb/307545 >
JWThanks, Marius
Please post back and we do know.
How to me netBT to load and work again? I spent several hours restart, activation and deactivation and anything else I could think or find Tech Tips.
After many hours of detective work, I found the idea in the journal of the events through MSCONFIG. Error type 7001 means service could not start because of a dependency (I knew that), but he went on to say "dir name or path incorrect syntax. I went into the registry and used exactly the same syntax of path as specified in "system32\DRIVERS\netBT.sys" NetBIOS and DHCP service has started.
WINDOWS ROOT>\SYSTEM32\hal.dll
DEL C:\boot.ini [press Enter] [to remove the bad]
BootCfg /Rebuild [press Enter] [to search an installations of Windows, and make a new one]Maybe you are looking for