Windows XP Home cannot reconnect my player card after each session of re - start, quick to key in the username and password still.
I recently installed a network storage drive to my network environments with desktop computer running windows 7, windows xp professional and windows xp home.
Have this problems that even when the drive has been mapped with identification information entered and save selection 'auto re - connect on each session' in windows xp home. Computers running windows xp professional, and windows 7 allows me to create and record identification information that allows the reader to reconnect each time the system starts up, but not on xp family.
Tried several methods of control over the update of the firmware, upgrade of service pack, part 3 card utilities and windows drive mapping manual, but it does not help.
Hope someone could give advice what could be done to solve this problem because it seems very likely that it due to windows problems.
Under user account, manage stored password options, I could create credentials in XP Pro, but not at home.
Thanks for your reply.
Correction of syntax: there is an oblique lack between "servername" and "share name". The slash in front of 'USER' is also the polarity. It should be rather than the oblique as in:
NET use Z: \\servername\sharename / USER: username password
-JW
Tags: Windows
Similar Questions
-
I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.
Strangely the same problem occurs when I try to install and older version of Lightroom 4.
Can you help me?
Hello
It is the OS, not Flash drive, to ask for the password. Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.
--
Maria
-
How to make a user to type in the username and password on Windows 7?
Hello
I get a Windows 7 library,.
and thay must set so thay have to put your username and password.
When alone, Windows will display all local accounts available on the login screen. The user if it is enough to click one (instead of typing).If you want users to be able to login using the username/password names that are not specific to this specific computer, the computer must be connected to a network with an Active Directory system that manages a list of usernames and passwords. -
I couldn't get into adobe flash player for an update. I went to adobe.com reregistered my user name and password. I still can't get into the adobe flash player update. Very frustrating
-
Hi I have a dell windows xp system and when I tried to activate remote desktop evil explains it all for you first I went to run then I typed in regedit then regidit came so I went to the file then I clicked connection network regestry I tyed in the box that says enter name of object to select I typed the computer name , then he said enter thers password network where I have my problem ive typed in my fourth name and password connection typed in everything what I was thinki someone can please help me
original title: problem with regeditHello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro
You can check the link: http://technet.microsoft.com/en-us/library/cc780927 (WS.10) .aspx
-
I get the error 0x800ccc92 with Windows Mail asking for my username and password.
The username and password I used does not work. How can I get my username and password or implement new?
http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/
Link above has an easy to follow Guide to set up Windows Mail.
Contact your ISP (Internet Service Provider).
They offer your broad band/Dial-up connection.
Ask them to:
username
password for your service account to wide band/Dial-Up with themServer of incoming POP3 mail
outgoing mail SMTP serverThe above information is required to set up Windows Mail.
ISPS are usually happy to help you set up your email account.
See you soon.
Mick Murphy - Microsoft partner
-
Windows Live Mail 2012 request username and password
Windows Live Mail 2012 never asked me user and password because it has been installed. After trying to send a photo from my Canon camera software after I had downloaded the images from the camera, asked for the username and password. Joined those from Microsoft. E-mail does not; It is in the Outbox. Choose the icon on desktop for Windows Live Mail 2012 and all contacts are gone. Email arrives, but can not send email. Need problem solved.
If you try to use the Windows function send to > message recipient to send an image, you must be logged into Windows Live Mail. There is a bug in the program.
When you are connected, you will see the contacts that belong to the Microsoft Account sign in to help. These are the same ones you see at http://people.live.com so sign here with the same account. If you are not signed in, you will see the default contacts list. There is no link between these different sets of contacts.
To avoid the bug, start by opening a message compose window in Windows Live Mail (for example by pressing Ctrl-N), and then apply a Insert > single photo to insert an image or images in the body of your message, or attach a file to send in the form of attachments.
If you are not able to send messages, please remove any message not sent from the Outbox, then compose a simple message, try again with a single topic and send it to yourself. Send the error message in your response.
-
Cannot install flash player. After you download the Adobe FLash Player installer and running, a gray pop-up window opens but nothing does not appear in it. There is no progress bar or whatever it is, and even after keeping it running for a long time, there is no progress. Please help with this question.
Hi Rlap,
We are aware of this problem and are working on a fix. In the meantime, please use the offline installation program, displayed at the bottom of the help page corresponding to your operating system and browser:
Installers are at the bottom of the page, in the section "problems".
--
Maria
-
How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.
Hi Carol_971,
- Did you the latest changes on the computer?
- You have security software installed on the computer?
Method 1
I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.
How to connect to your Windows XP-based computer if you forget your password or if your password expires
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
every time when it is open to the top IE 8 in what concerns some page open then always comes error problems... We cannot connect to Hotmail right now. Please make sure that you are connected to the internet and try again?
my internet still works fine and no problem, but it the site themselves.
You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1
-
username and password on windows xp professional
I changed my username and password on windows xp professional and now cannot open a session.
Hello justglen,
Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky...
Best regards
Matthew_Ha
-
Home network connection will not be ' don't forget username and password
I have a small home network two PCs connected via a wireless router - Vista Home Premium connected wireless and Windows 7 Home Premium LAN connected.
I have no problem with the Windows 7 PC, but the PC Vista doesn't remember the "name of PC-domain\username" and the password (from the Windows 7 PC) despite the box being checked. Once connected there no problem access the required records and the printer.
I tried to use "map network drive", but, when the Vista PC is started, the network drive was a red x against it and I have to go through the PC/username and password rigmarol.
The Vista PC belongs to another Member of the family and when she wants to print I have to intervene to make the connections. In my view, that it should be able to be done automatically.Hi WeDontByte,
You can store passwords in Windows that you use to connect to Internet sites or networks. In this way, you don't have to type your password because Windows logs you automatically whenever you return to this place.
1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. in the left pane, click manage your network passwords.
3. click on Add.
4. in the journal on the box, type the name of the computer on the network or the URL of the Web site that you want to access.
5. in the user name and password areas, type the user name and password that you use for this computer or a Web site, and then click OK.Store passwords for automatic logon
http://Windows.Microsoft.com/en-us/Windows-Vista/store-passwords-for-automatic-logonI hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error message starting Windows "username and password do not match."
The message is, "Usernam and password do not match." I want to delete this message permanently. How can I do?
* original title - I keep getting a Message on StatrUp.*
Hello
1. are you able to connect?
I suggest to start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
If not, then my brother this link and check if this may help:
http://support.Microsoft.com/kb/189126
It will be useful.
-
Account - My Windows email account to login with a username and password of e-mail
I had this same problem about 2 years ago... my windows email account wants to connect with a user name and password. Why? It's been so long, I don't know what they were... I don't want this problem with my email... ever... How can I avoid this. I just created a different password so I could do... How can I get my email again? I won't be able to see your response as my email is broken. You can call me * removed *. Thanks lj
If you have forgotten your username and password, you will need to contact your email provider and get this information from them. At the same time, they can tell you the right settings for your e-mail program, you specify here, so it is difficult to proceed further in your question. You can check here: www.oehelp.com/OETips.aspx#3
Steve
Maybe you are looking for
-
How to save my host file?
I use El Capitan and try to add an entry to my host file. I am all good up to the point where I have to enter ^ O. At that point, he opens a Finder window to register but I have no idea where to save to. I tried pretty much all the options available,
-
Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.
-
Why do I get Office Genuine Advantage?
Why I am being presented with Office Genuine Advantage Notifications (KB94910) in the Windows Update for Windows 7 Ultimate Edition? I wonder what I do not have the suite Office installed on my computer, I use OpenOffice.org. In fact, the only progra
-
How can I download a dvd decoder
How can I download a dvd decoder
-
E4200 access via a browser is low. Password and wireless keys must be the same.
I tried to change my admin password to something I just want to know. When I did, I was told that the key and wireless admin password must be the same. What madness is this? I have to give my children the key to enter the system there. I put parental