Windows XP Split 8.1 - no noise when it is docked

Similar Questions

• Re: Satellite L500 - crackling noise when audio plays

  Hi all

  I bought a few weeks ago L500 (Windows 7 64-bit). Everything is fine except for the sound. 1 h or more after running computer, the speakers begin to produce a "cracking", "metal" noise when the audio is reproducible, regardless of the source (CD, system sounds, movies, MP3s...). It's just like there are hundreds of "micro-pannes". The same thing with the headphones. This seems also affect all media files, for example the length of 10-minute videos take 12 minutes or so play due to these micro-interruptions. The sound gets worse over time and gets normal once the system is rebooted, but a few minutes later the noise comes back.

  I have all the latest Toshiba driver implemented to date, BIOS, LAN, sound cards, etc..

  What can I do? Any idea will be welcome.

  Thanks in advance.

  Hello

  I don't know much L500 series but creaking sound is annoying problem for A500 series. I think that a graphics card driver is a troublemaker. If your laptop is equipped with an nvidia graphics card, go to his site and update a Vga driver. In my case, it solved my problem. (B-)

• Noise when using computer

  Suddenly, when I use my computer to get on the internet, I hear a thud. It happened once before, but suddenly disappeared. I wonder if the fan may be bad. Any ideas on what is the cause? The only other time that I hear it is when my computer is near the end of the scan of Norton fuul. This was bought in 2009 is therefore an old computer.

  Holly

  HP Slimline s3700y PC

  Windows Vista

  PS Now I don't hear the noise, but most of the time I hear the sound when you go to different Web sites.

  I tried your suggestion yesterday and by changing the diet plan of the balanced or recommended energy saving plan has worked. I don't hear any noise now.  The performance for power management is not as good as it takes more time to load web pages, but I prefer this to the noise. He said beside the plan of standby power energy savings is rated with a 5 and the performance is rated a 2, while balanced or recommended plan has energy savings, a 3 and performance 3.

  I've always kept it on the recommended plan, which I think is the plan by default as it was defined like this when I bought my computer.

  Out of curiosity, why is she become necessary now that I change for energy savings?  I have that noise when I got to my computer. Is this because the computer is older?

  The information that you sent me has also stated the following:

  Some parameters to cause fans to turn too fast for a typical home environment. If you use the computer in an environment quiet where temperatures remain mild and stable (up to and 30 degrees Celsius or 86 degrees fahrenheit), and then follow these steps to adjust the power settings in a more appropriate setting:

  Do you know why the environment calm and temperatures are a factor?

  I waited until today to answer that I wanted to test it for another day. I also put it to (balanced) recommended plan and the noise comes back then I then changed once again to the energy saver and it will keep on saving.

  Thanks for your help.

  Holly

• My pc is slow and it makes the noise when it works

  Hello

  My pc is slow, when I'm typing and all open programs. It takes time for any program to open and it makes the noise when it works.

  My pc is a Windows Starter 7 mini laptop.

  Hello

  Problems of material software medium noise is not physical and makes no noise.

  Check with support from the manufacturer of your system, their online documentation and drivers, diagnostics,
  and ask questions in the forums (if any) on known problems.

  There may be some performance issues that could be helped with the software however the material
  problems need to be addressed first.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• iMac by making a noise when I turn it on.  What's wrong?

  What can I do to stop the noise when I turn on my iMac?

  Turn down the volume. If this does not work for you, reset the NVRAM according to the following: How to reset the NVRAM on your Mac - Apple Support

• Tecra S1: Notebook generates noise when the LCD display is on

  Tecra S1 is 4 years old and generates a high noise when the LCD is turned on (from last week). The noise comes most of the keyboard. Could this be a defunct ups?

  Is there an easy way to fix it? It's not very loud, but in a quiet that is audible.

  Hmmm I think this noise comes certainly from the FL inverter.
  But I can't tell if the inverter is faulty or not because I noticed that her top on different laptops when the brightness of the display is placed on the lower floor.

  But if you think that this problem was not present in the past, then you need to contact a technician who could help you replace the inverter FL.

  Best regards

• Qosmio G20: Fan makes an awkward noise when he turns around

  Hey everybody,
  Another problem, but not Vista! Although it is always a problem!

  My exhaust fan makes a clunky noise when it runs. I hear it's going along and round like a noise of rachetty and then at other times its fine.

  Someone at - he had this?
  Should I open and give it a clean?

  Hello

  It's not easy to tell if the fan is malfunctioning or not.
  Qosmio G20 is a laptop very powerful and cooling modules are larger and stronger as modules on any of cooling for powerful laptop.
  If you use the solid performance applications such as games or videos of the cooling modules will work with maximum performance and are stronger.

  But of course; the cooling module could malfunction. In this case, it must be replaced.

• M601: Manufacturing of Laserjet M601 clicking noise when printing

  I have a laserjet M601, which has just started to make a rattling noise when it prints.  Looks like it is close to the top right corner before somewhere under the screen.  It snaps when a page is caught to start printing.  I hear a 3-5 clicks when the paper is caught, then it stops for the rest of the page.  If multiple pages print, click before the beginning of each page to be printed.  All other prints are normal.  The print job ends very well and all is well.  I only hear it clicking now and it seems to be deteriorating.  Thoughts?  Thank you.

  Hello

  I have some further thoughts on this. Are you sure that the manual tray loading produces noise? They use different pickup assemblies. If we have confirmed both tray 2 and Tray 1 (manual feed tray) produce the same noise that we have to look at what they have in common. Toner, transfer roller, editing of the main landing gear, & fuser.

  What type of toner cartridge do you use? If possible can you exchange with others and print a test page? If the problem persists, what is the number of pages on the printer? Have you recently replaced a maintanece kit?

  I work for HP, supporting the HP Experts, who volunteer their time and expertise to help others.

• PCI-6733 signal noise when the computer screen is plugged, the weight on the case

  Greetings,

  I hope that it is in the right section.

  Card: PCI-6733

  I'm a 60 Hz, 2 mV peak-to-peak with a compensated 2.4mV noise when the monitor is plugged into the VGA port.

  Same card in a second computer, problem is more serious, 4mV Ridge to Ridge, 4.3mV offset. When I push on the case near the power supply the offset rises from a few millivolts.

  The two computers are running the same exact versions of software and drivers. Dell and quite similar to each other in both material and form.

  I have a third computer that noise coming out of the map is horrible no matter what.

  I exchange business cards and the problem is with the computer, does not follow the acquisition cards.

  No idea how to solve this problem and what is the cause?

  Thanks for any thoughts!

  -Michael

  Tall_Michael,

  Looks like you may be plugging your monitor and your computer in different points of sale.  If this is the case, this is probably the cause of your noise and can be eliminated by connecting the two devices on the same socket.

  Here are some articles that deal with the noise you are experiencing and various workarounds in the cases where what I mentioned above are not the case:

  The problems of noise in the measurement configurations

  Sources of the measuring Signal ground

  How to eliminate noise on measures DC power without using a lowpass filter of material?

  I hope this helps!

  Thank you

  Trey C.

• I can't use windows update. I get an error when I try to use it.

  I can't use windows update. I get an error when I try to use it. Someone knows how to solve this problem

  Original title: I have a desktop pc with windows xp, I can't use windows update. An error when I try to use it. Someone has any idea how to solve this problem.

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28 (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3 http://support.microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  See also: http://support.microsoft.com/kb/2497281

  April 8, 2014, support and updates for Windows XP will be more available. Don't let not your PC not protected.

  http://Windows.Microsoft.com/en-AU/Windows/end-support-help

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• my player windows media "does not. It freezes when I'm clicking on the library. I can play songs when I double-click on them in my documents.

  my player windows media "does not. It freezes when I'm clicking on the library. I can play songs when I double-click on them in my documents.

  Hello

  1 how long have you been faced with this problem?
  2 have you made changes on the computer before this problem?

  Run the following article fixit tool and check.
  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.