Windows xp unattended profilesdir programfilesdir

Similar Questions

• Analyze the error "C:\Windows\Panther\unattend.xml" after the recovery attempt (computer laptop gateway)

  I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.

  This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required

  "Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?

  NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).

  So yes, this is what he does now.

  It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »

  Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.

  I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.

  Ideas? »

  Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  Above is how the gateway recovery is supposed to work.

  Also, try this:

  Try using a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  To exclude software as the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install firefox to $OEM Unattended Setup $ WINDOWS XP

  I WANT TO INSTALL FIREFOX WHEN INSTALLING WINDOWS XP UNATTENDED

  not understand you exactly my question I want to integrate firefox my intallation bootable windows xp cd. but by the way, thanks for your response. I solved it by using google

• get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  Original title: Windows Media Center

  Whenever I try to add videos (or whatever it is) on my media center it will not add and I get this pop up message "a necessary component of the Windows Media Center has not started properly. Restart Windows Media Center.

  And I restart it, but it still gives me the same thing whenever I'll add things. I also have the Extender for my xbox 360 and video flies never show there either. A few moments ago, I got this working with my xbox and everyhting showed, now it gives me fits. Can someone please help

  Try this for me:

  Task Scheduler (Local)-> library of Task Scheduler-> Microsoft-> Windows-> Media Center-> MediaCenterRecoveryTask

  If this does not work, try this:

  1. open regedit by clicking on the start menu and type "regedit" in the search box and clicking on the link of the regedit program that opens.

  2. go in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  3. click on the file --> export and save a copy of this portion of the registry where you can find later if you need IT.

  4 Note the values in the column of data to "ProgramFilesDir" and "ProgramFilesDir (x 86(). (If you have only one of those that, don't worry. I think that only users of Windows 64-bit will have both, but I don't know.)

  5. If you have a standard installation of Windows, the right for "ProgramFilesDir" column should read "C:\Program Files" and the right column for "ProgramFilesDir (x 86) ' should read"C:\Program Files (x 86)"." If they are not, try changing them to these values. To do this right click on the name in the left column and selecting Edit. Copy the 'correct' value of this message in the data value field in the box that opens. Click OK , and then do the same for the other (if you have two).

  6. RESTART. It will not work until you restart your computer.

  7. Open Windows Media Center and see if the problem is resolved.

• Is it possible to change the recovery CD?

  My question is used, I can change the contents of the recovery CD as I wish?

  I'm not happy with the recovery CD as it is full of tiny applications that do that my slower Tablet (even if I uninstalled software and tools, the registry will be always full and heavly loaded) so what I need is a new installation of the operating system with the necessary content (in fact, some drivers only).

  I have my own windows XP Professional CD and I managed to install it, but the touchscreen does not work because it is not a tablet PC edition.

  all ideas will be useful.

  /////////////*****************\\\\\\\\\\\\\\\

  I have an idea that works very well, but I'm stuck
  at any given time. There is a tool called nLite, it is
  It's work is to create a windows XP unattended and without
  Installation CD. There the i386 folder
  from the windows you have, and this is exactly my problem.
  How can I get the folder i386 Windows XP Tablet PC edition
  on the recovery CD?
  Is it a Ghost tool that does this?

  Hello

  > My question is the usual; can I change the contents of the recovery CD as I wish?
  No, the image of Toshiba which is placed on the recovery of Toshiba CD is secure and you will not be able to open this image.

  Regarding the tool nLite;
  I know that this tool and I used it to implement the XP service Pack 2 because my original CD of Win XP Pro was delivered without SP2.

  As you said that the files in the i386 folder are needed.
  This folder, I found on my XP CD and in Windows OD on the HARD drive.

  On my laptop it s placed in the folder.
  Cache C:\Windows\Driver-> about 109MB
  C:\Windows\ServicePackFiles-> about 490MB

  There is also another way to create a clean restore CD.
  You can remove all the tools is not necessary and utility of the operating system that is installed, and then create a clean image with Norton Ghost utility file.

  But please note that the laptop supports various features such as the i.e.FN. keys
  All Toshiba preinstalled programs are necessary if you want to use all functions of the laptop!

  Good bye

• Tecra S3 - freezes a few reboots

  During the installation of MS Windows XP unattended on a Tecra S3, post BACK as (copy of files) window, when he left, prepares to restart, the screen is black and nothing more. If turn off and on the computer, the process continues.

  On the screen of Windows installation, after installation, when it prepares to open a session for the first time, the computer is not to proceed with the Windows XP start screen.

  Any ideas?

  Hello

  Did you use a Toshiba Recovery CD or the original Microsoft Windows OS?

• Contained in the factory of recovery failure

  3000 N100

  Type: 0689 A42

  Vista Basic

  Background:

  I pressed the F11 at startup the rescue and recovery program in order to have a recovery (content of the plant).

  Then, the system has begun to preload the customization. However, in State of play (the sixth auto-boot), he came out an error message. I clicked 'OK', then it reboot. If the next boot in Windos, it asked me to restart the installation.

  The error message:

  Windows could not parse or process unattend answer file.

  [C:\Windows\panther\unattend.xml] to pass [auditUser]. The parameters

  When processing parameter for the component

  [Microsoft-Windows-Deploment}

  I have a ghost image and try to get it back again to the factory content. But I get the same result. What should I do? (Help)

  Thank you...

  you did a recovery media before starting this whole process? If you do, use it and reinstall the whole system with it.

• Installation of textmode XP without PS/2 keyboard?

  Hello

  I try to install XP (SP2 specifically) on a computer with no PS/2 port.

  I'm guessing that "slipstreaming" installation with usb textmode drivers disk solve the problem of installing windows without recognizing the (generic Dell keyboard) keyboard.  The BIOS doesn't have a Legacy USB keyboard option or similar.

  Thank you

  -Hedda

  Hi Hedd,

  I suggest you to make a Windows XP unattended installation.

  For more information, refer to this link: How to perform an installation without assistance of Windows from a CD-ROM

  Hope the helps of information.
  Please post back and we do know.

• Invalid response file

  I am trying to charge my cell phone and after all is finished and loads of windows for the first time that he comes up with an error "Windows cannot parse or process unattend [C:\Windows\Panther\unattend.xml] answer file in the answer file is invalid." The error was detected in the column of the row 9 222 of the answer file. "I replaced the hard drive and it wont let me go into safe mode as the installtion is not complete. Any help please

  You use an installation with an answer file to configure the system as you wish?  If there is a problem with the answer file, then you will need to do a normal installation instead of one without supervision and thus circumvent the answer file.  You have the means to do so?  How is made installation - on DVD or on a network?  You have another program for unattended Setup that you can use or is it only available?  Do you know how to fix the error in the answer file if you have access to and can make changes?  If you can not enter the system in safe mode or normal mode, the only way is through to boot from a CD/DVD.  I don't know if the command prompt on the drive of Installation of Vista will help, but it can be a way to access what is on the hard drive.  I don't know what you hope to accomplish with access to the system partially installed in any case.  It seems to me you need to do another installation using a NORMAL process, so not to interfere with the answer file.  If you still want to participate, here are two options that might work.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (using another computer).

  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (yet once done from another computer.  This should give you enough access to the system so you can be able to fix the problem with the answer file (if this will help at this stage - since I do not know how to restart the installation where he had failed.  You will probably need to reboot again, but this time you must correct the answer file before you start or do a normal installation without using an answer file.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Failures of deployment with systems - SCCM precision 2012 R2 using MDT to deploy Win7

  I managed to deploy several types of Latitudes and OptiPlexes using the driver cabins here to create packages of drivers.  However, I can't deploy precision systems - in this case, T3600s and M4700s are both in check at the same place - pilot phase of injection. The smsts journal and the dism log indicate that the first pilot injected image offline successfully but fail when you try to inject the second pilot.

  Copied from the logs:

  smsts.log:

  The content downloaded successfully to E:\_SMSTaskSequence\Packages\RD100068.
  Added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" to the Windows driver store.
  Definition of % SystemRoot % 'E:\WINDOWS.
  Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
  List element added with the value of the key "1"
  Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
  Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
  Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
  Calling the Package manager to add the drivers to the driver offline store.
  Command line for the .exe extension is '%1' % *.
  "" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  "" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  Process is completed with exit code 0
  DISM pilots successfully added to the driver offline store.
  Successfully added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" in the Windows driver store.
  Added "E:\_SMSTaskSequence\Packages\RD100068\0B458F91-49A9-41F0-948E-F69800676CA0" to the Windows driver store.
  Definition of % SystemRoot % 'E:\WINDOWS.
  Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
  List element added with the value of the key "1"
  Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
  Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
  Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
  Calling the Package manager to add the drivers to the driver offline store.
  Command line for the .exe extension is '%1' % *.
  "" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  "" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  Process is completed with exit code 2147500037
  uExitCode == 0, HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,548)
  DISM failed with return code - 2147467259
  AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
  AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
  Cannot add the store driver to driver. Code 0x80004005
  InstallDriver (iInstallParams-> sContentId, iInstallParams-> Usualssource, iInstallParams-> pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,557)
  ReleaseSource() for E:\_SMSTaskSequence\Packages\RD100068.
  number 1 for the source of reference before releasing E:\_SMSTaskSequence\Packages\RD100068
  Resolved source E:\_SMSTaskSequence\Packages\RD100068 output
  pDriverInstaller-> InstallDriverPackage (sPackageId, pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,380)
  Cannot configure the driver. Code 0x80004005
  Exit with return code 0x80004005
  Process is completed with exit code 2147500037
  !--------------------------------------------------------------------------------------------!
  Cannot run action: apply Driver Package - T3600 precision.
  Unspecified error (error: 80004005;) Source: Windows)

  DISM.log:

  PID = 1624 TID = 1796 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
  PID = 1624 TID = 1796 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
  PID = 1624 TID = 1796 successfully loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
  DISM store provider: PID = 1624 TID = 1796 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
  DISM store provider: PID = 1624 TID = 1796 could not obtain and initialize the provider PE.  Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1624 TID = 1796 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1624 TID = 1796 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1624 TID = 1796 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM Manager: PID = 1624 TID is 1796 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
  DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1624 TID = 1796 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM. EXE:
  DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
  DISM. EXE:
  DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
  DISM. EXE: Version of Dism.exe: 6.3.9600.16384
  DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
  DISM store provider: PID = 1624 TID = 1796 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1624 TID = 1796 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1624 TID = 1796 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1624 TID = 1796 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1624 TID = 1796 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM. EXE: Got the provider collection. Now list to build the control panel.
  DISM. EXE: Try to add the provider controls: DISM log provider
  DISM. EXE: Attempting to add provider orders: FolderManager
  DISM. EXE: Attempting to add provider orders: WimManager
  DISM. EXE: Successfully recorded commands to the provider: WimManager.
  DISM. EXE: Attempting to add provider orders: VHDManager
  DISM. EXE: Attempting to add provider orders: GenericImagingManager
  DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
  DISM. EXE: Try to add the provider controls: Compatibility Manager
  DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
  DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
  [1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
  UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
  WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
  DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
  DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
  DISM store provider: PID = 1624 TID = 1796 get provider VHDManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1624 TID = 1796 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
  DISM imagery provider: PID = 1624 TID = 1796 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
  DISM store provider: PID = 1624 TID = 1796 get provider WimManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1624 TID = 1796 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  [1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
  UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
  WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
  DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
  DISM imagery provider: PID = 1624 TID = 1796 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
  DISM imagery provider: PID = 1624 TID = 1796 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
  DISM Manager: PID = 1624 TID = 1796 physical path: E:\ - CDISMManager::CreateImageSession
  DISM Manager: PID = 1624 TID = 1796 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
  DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
  DISM Manager: PID = 1624 TID = 1796 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5" - CDISMManager::LoadRemoteImageSession
  DISM Image Session: PID is 1944 instantiating the provider store. -CDISMImageSession::get_ProviderStore
  DISM store provider: PID = 1944 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM operating system provider: PID = 1944 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
  DISM operating system provider: PID = 1944 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
  DISM operating system provider: PID = default Windows from 1944 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
  DISM store provider: PID = 1944 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 failed to load provider: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
  DISM store provider: PID = 1944 could not obtain and initialize the provider PE.  Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1944 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1944 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM Manager: PID = 1624 TID = 1796 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5 - CDISMManager::CreateImageSession
  DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM operating system provider: PID = SystemPath started in 1944 E:\ - CDISMOSServiceManager::SetSystemPath
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
  DISM store provider: PID = 1944 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM Package Manager: PID = 1944 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  Transactions disabled in the registry, continuing without transaction support.
  The core transactions are disabled, continuing without transaction support.
  Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
  To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
  Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
  00000001@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
  Could not load SrClient DLL path: C:\windows\system32\srclient.dll.  Continue without the system restore points.
  00000002@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
  DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
  Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
  Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
  Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
  Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
  Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
  Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
  Loading offline registry hive: ntuser.dat in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat' path '\\?\E:\Users\default\ntuser.dat'.}
  Loading offline registry hive: schema.dat, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat' path '\\?\E:\Windows\system32\smi\store\Machine\schema.dat'.}
  Image offline is: writable
  00000003 CSI 18012584 (0x0112d9a8) store initialized
  Session: 1944_7162296 initialized by the client of DISM Package Manager provider.
  DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
  DISM Package Manager: PID = 1944 Loaded battery for use online only for maintenance. -CDISMPackageManager::RefreshInstanceAndLock
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM operating system provider: PID = 1944 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
  DISM driver manager: PID = 1944 other newspapers for pilot operations can be found in the operating system the target to %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM. EXE: Got the provider collection. Now list to build the control panel.
  DISM. EXE: Try to add the provider controls: DISM Package Manager
  DISM. EXE: Successfully recorded orders for the vendor: of DISM Package Manager.
  DISM. EXE: Attempting to add provider orders: OSServices
  DISM. EXE: Attempting to add provider orders: MsiManager
  DISM. EXE: Successfully recorded commands to the provider: MsiManager.
  DISM. EXE: Attempting to add provider orders: IntlManager
  DISM. EXE: Successfully recorded commands to the provider: IntlManager.
  DISM. EXE: Try to add the provider controls: DriverManager
  DISM. EXE: Successfully recorded orders for the supplier: DriverManager.
  DISM. EXE: Try to add the provider controls: DISM Unattend Manager
  DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
  DISM. EXE: Try to add the provider controls: DISM log provider
  DISM. EXE: Attempting to add provider orders: SmiManager
  DISM. EXE: Attempting to add provider orders: Edition Manager
  DISM Transmog provider: PID = 1944 session current image is [offline] - CTransmogManager::GetMode
  DISM. EXE: Successfully recorded orders for the supplier: Edition Manager.
  DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM Package Manager: PID = 1944 node not found. Nothing to do. -CPackageManagerUnattendHandler::Apply
  DISM store provider: PID = 1944 get provider SmiManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM Smi provider: PID = 1944 SMI provider selected "offlineServicing" maintenance pass. - CSmiWrapper::ApplySettings
  00000004@2014/2/12:00:13:37.743 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x70dae316 @0x70dc0059 @0x70d9ae39 @0x70d9a9cc @0x70e81d6b)
  DISM Smi provider: PID = 1944 list components defining the following substitutions:-CSmiWrapper::ApplySettings
  DISM Smi provider: PID = overload parameters 1944 successfully applied to the component [Microsoft-Windows-PnpCustomizationsNonWinPE, Culture = neutral, Version = 6.1.7601.17514, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = amd64, versionScope = NonSxS] - CSmiWrapper:ApplySettings
  DISM Smi provider: PID = 1944 end of list. -CSmiWrapper::ApplySettings
  DISM store provider: PID = 1944 get provider DriverManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1944 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM driver manager: PID = 1944 ENTER InstallDriversOffline (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = path of the Windows directory offline parameter 1944: "E:\Windows" (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 setting the system to reboot drive offline: "C:" (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Offline Image has "PROCESSOR_ARCHITECTURE_AMD64" (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 user has administrator privileges. (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = SOFTWARE Offline 1944 hive located in the: E:\Windows\system32\config\SOFTWARE (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Found "1" button (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 '1' treatment... (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 path = "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 without credentials provided (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = the SYSTEM offline 1944 hive located in the: E:\Windows\system32\config\SYSTEM (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SYSTEM (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = Search for 1944 for drivers to 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5 '... (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 locate the INF files in "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Found lead oz776x64.cat (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Found lead oz776x64.inf (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Found lead oz776x64.sys (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Found lead release.dat (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 found 1 driver package (s) to "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5". (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' driver Package (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 installation driver 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the operating system currently offline... (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 Imported 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the driver store offline to "E:\Windows\System32\DriverStore\FileRepository\oz776x64.inf_amd64_neutral_0b0c9ec4be8306ad\oz776x64.inf". (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 installed "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf" driver package! (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 devices marked with success to reinstall! (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = drivers Installed "1" of 1944. (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944 RETURN InstallDriversOffline (0) (HRESULT = 0 x 0) - DriversCallback
  DISM driver manager: PID = 1944, trying to remove [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
  DISM driver manager: PID = 1944 successfully removed [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
  DISM Image Session: PID = 1944 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
  DISM store provider: PID = 1944 finalize (DISM Package Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat, the customer can always need open.} [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat
  DISM Package Manager: PID = base CBS finalization of 1944. -CDISMPackageManager::Finalize
  DISM store provider: PID = 1944 cutting provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1944 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = provider sectioning of 1944: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = provider sectioning of 1944: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 found the provider PE.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1944 finalize maintenance provider (DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 cutting provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 cutting provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1944 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = provider sectioning of 1944: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 finalize (Edition Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 cutting provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1944 freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = provider sectioning of 1944: OSServices - CDISMProviderStore::Internal_DisconnectProvider
  DISM operating system provider: PID = 1944 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
  DISM store provider: PID = 1944 freeing the local reference to the DISMLogger.  Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
  DISM. EXE: Session of the Image has been closed. Reboot required = no.
  DISM. EXE:
  DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
  DISM. EXE:
  DISM store provider: PID = 1624 TID = 1796 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1624 TID = 1796 sectioning supplier: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1624 TID = 1796 sectioning supplier: WimManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1624 TID = 1796 sectioning supplier: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1624 TID = 1796 sectioning supplier: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1624 TID = sectioning provider 1796: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1624 TID = 1796 freeing the local reference to the DISMLogger.  Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
  PID = 2016 TID = 1564 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
  PID = 2016 TID = 1564 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
  PID = 2016 TID = 1564 correctly loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
  DISM store provider: PID = 2016 TID = 1564 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
  DISM store provider: PID = 2016 = 1564 TID failed to obtain and initialize the provider PE.  Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 2016 TID = 1564 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 2016 TID = 1564 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 2016 TID = 1564 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM Manager: PID = 2016 TID is 1564 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
  DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 2016 TID = 1564 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM. EXE:
  DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
  DISM. EXE:
  DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
  DISM. EXE: Version of Dism.exe: 6.3.9600.16384
  DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
  DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
  DISM store provider: PID = 2016 TID = 1564 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 2016 TID = 1564 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 2016 TID = 1564 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 2016 TID = 1564 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 2016 TID = 1564 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM. EXE: Got the provider collection. Now list to build the control panel.
  DISM. EXE: Try to add the provider controls: DISM log provider
  DISM. EXE: Attempting to add provider orders: FolderManager
  DISM. EXE: Attempting to add provider orders: WimManager
  DISM. EXE: Successfully recorded commands to the provider: WimManager.
  DISM. EXE: Attempting to add provider orders: VHDManager
  DISM. EXE: Attempting to add provider orders: GenericImagingManager
  DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
  DISM. EXE: Try to add the provider controls: Compatibility Manager
  DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
  DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
  [2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
  UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
  WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
  DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
  DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
  DISM store provider: PID = 2016 TID = 1564 get provider VHDManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 2016 TID = 1564 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
  DISM imagery provider: PID = 2016 TID = 1564 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
  DISM store provider: PID = 2016 TID = 1564 get provider WimManager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 2016 TID = 1564 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  [2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
  UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
  WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
  DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
  DISM imagery provider: PID = 2016 TID = 1564 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
  DISM imagery provider: PID = 2016 TID = 1564 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
  DISM Manager: PID = 2016 TID = physical path 1564: E:\ - CDISMManager::CreateImageSession
  DISM Manager: PID = 2016 TID = 1564 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
  DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
  DISM Manager: PID = 2016 TID = 1564 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176" - CDISMManager::LoadRemoteImageSession
  DISM Image Session: PID is 1608 instantiating the provider store. -CDISMImageSession::get_ProviderStore
  DISM store provider: PID = 1608 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM operating system provider: PID = 1608 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
  DISM operating system provider: PID = 1608 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
  DISM operating system provider: PID = default Windows from 1608 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
  DISM store provider: PID = 1608 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
  DISM store provider: PID = 1608 failed to obtain and initialize the provider PE.  Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1608 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
  DISM store provider: PID = 1608 get provider DISMLogger - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM Manager: PID = 2016 TID = 1564 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176 - CDISMManager::CreateImageSession
  DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM operating system provider: PID = 1608 setting to E:\ - CDISMOSServiceManager::SetSystemPath SystemPath
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
  DISM store provider: PID = 1608 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM Package Manager: PID = 1608 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  Transactions disabled in the registry, continuing without transaction support.
  The core transactions are disabled, continuing without transaction support.
  Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
  Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
  To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
  Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
  00000001@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
  Could not load SrClient DLL path: C:\windows\system32\srclient.dll.  Continue without the system restore points.
  00000002@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
  DISM Package Manager: PID = 1608 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
  Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
  Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
  Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
  Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
  Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
  Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
  Failed to open the registry root: n/a, key: Microsoft\Windows NT\CurrentVersion\ProfileList. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  Cannot query for path in the user profiles directory. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  Could not load the default user profile registry hive. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
  Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
  Unable to load the store currently out of the startup directory: directory '\\?\E:\ '. "and windows: '\\?\E:\Windows\' [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
  Failed to initialize the store with the boot drive settings: E:\ and windows directory: E:\Windows [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
  DISM Package Manager: PID = 1608 failure initializing the session - CDISMPackageManager::RefreshInstanceAndLock (hr:0 x 80070002)
  DISM Package Manager: PID = 1608 making internal initialization - CDISMPackageManager::Initialize(hr:0x80070002) ├echec
  DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
  DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
  Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
  DISM operating system provider: PID = 1608 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
  DISM operating system provider: PID = 1608 could not open the Microsoft\Windows NT\CurrentVersion key. -CDISMOSServiceManager:DetermineBootDrive(hr:0x80070002)
  DISM driver manager: PID = ├echec 1608 to get the boot from the operating system services provider drive. -CDriverManager:Initialize(hr:0x80070002)
  DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
  DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 provider has not been met.  Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
  DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
  DISM store provider: PID = 1608, cannot call the Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80004005) method
  DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
  DISM. EXE: Got the provider collection. Now list to build the control panel.
  DISM. EXE: Attempting to add provider orders: OSServices
  DISM. EXE: Attempting to add provider orders: MsiManager
  DISM. EXE: Successfully recorded commands to the provider: MsiManager.
  DISM. EXE: Attempting to add provider orders: IntlManager
  DISM. EXE: Successfully recorded commands to the provider: IntlManager.
  DISM. EXE: Try to add the provider controls: DISM Unattend Manager
  DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
  DISM. EXE: Try to add the provider controls: DISM log provider
  DISM. EXE: Attempting to add provider orders: SmiManager
  DISM store provider: PID = 1608 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
  DISM store provider: PID = 1608 provider has already been initialized.  Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
  DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
  DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:390 - CUnattendManager::Apply (hr:0 x 80004005)
  DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:654 - CUnattendManager::InternalExecuteCmdLine (hr:0 x 80004005)
  DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:603 - CUnattendManager::ExecuteCmdLine (hr:0 x 80004005)
  DISM. EXE: DISM Manager Unattend dealt with at the command line, but failed. HRESULT = 80004005
  DISM Image Session: PID = 1608 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
  DISM store provider: PID = 1608 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1608 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 sectioning supplier: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 sectioning supplier: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 found the provider PE.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1608 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = sectioning vendor 1608: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 1608 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 sectioning supplier: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608, freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 1608 sectioning supplier: OSServices - CDISMProviderStore::Internal_DisconnectProvider
  DISM operating system provider: PID = 1608 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
  DISM store provider: PID = 1608, freeing the local reference to the DISMLogger.  Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
  DISM. EXE: Session of the Image has been closed. Reboot required = no.
  DISM. EXE:
  DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
  DISM. EXE:
  DISM store provider: PID = 2016 TID = 1564 found the OSServices.  Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
  DISM store provider: PID = 2016 TID = 1564 provider sectioning: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 2016 TID = 1564 provider sectioning: WimManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 2016 TID = 1564 provider sectioning: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 2016 TID = 1564 provider sectioning: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 2016 TID = 1564 provider sectioning: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
  DISM store provider: PID = 2016 TID = 1564 freeing the local reference to the DISMLogger.  Stop recording. -CDISMProviderStore::Internal_DisconnectProvider

  If information is needed, please let me know.

  Thank you!

  Not sure what was broken, but I built another image captured with MDT 2013 and details began to Imaging without problem.

  The differences between the captured images were:

  • inscription on the installation of JRE 32 bit
  • change in the licensing model on the installation of Office (from MAK to KMS)
  • software updates since last build - which would have been patches of January and February.

  Still, I don't think that the differences above would have corrected the problem - but nevertheless, I'm now building systems of precision without problem.

• REBOOT LOOP AFTER UNTTEND. XML MESSAGE

  Hello

  I am in a desperate state. Problem is with Sony Vaio NR38S
  Two days ago, my windows crashed with a problem to dump memory (blue screen of death).
  So I decided to restore it to factory settings. The process has begun and formatted my C and then came the moment even where that it started to install software againg dump problem appeared and blue screen of death.
  Now whenever I try to restart my computer (so I can restore to the factory settings) guests following messag

  WINDOWS could not parse or process unattend answer file. [c:\windows\panther\unattend.xml]. The answer file is invalid.

  and reboots after you have clicked on the ok button.

  Please help me in anyway. I don't have a recovery disk. is there anyway to fix the problem?

  Hi Michael,.

  This seems to be a problem with the hardware. You may need to contact the manufacturer of your computer to this topic.

  http://Forum.NotebookReview.com/forumdisplay.php?f=8

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sysprep Answerfile question

  I'm trying to sysprep on the business window 7 64 bit using my answer file, but it gives me an error saying that "Windows could not parse or process [C:\windows\Panther\unattend.xml] unattended Setup answer file to pass [oobeSystem]. Could not apply the setting specified in the response gall. The error was detected when the parameters for component [Microsoft-Windows-Shell-Setup] precession.

  I have attached image captured on an error and my answer file settings.

  Please let me know where I am doing wrong.

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.msdn.Microsoft.com/Forum
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil

• Sysprep with the answer file

  I used sysprep/Imagex without problem.  You wanted to change the default profile, so I went to windows 7 in Audit mode.  I created an answer file.  After sysprep when the pc enters the installation program, I see an error message about could not find or process the unattend file.  I am including the below xml answer file and also the file from the directory of the Panther setuperr.log.  Any help would be appreciated.

  -

  -

  -

  true

  2014-09-25 13:27:02, error CSI 00000001 (F) 8022000 b [error, facility = FACILITY_STATE_MANAGEMENT, Code = 11 (0x000b)] #6 # to CWcmEngineCore::GetNamespaceWithOptions (nsid = {name: Microsoft-Windows-Shell-Setup worm: lang: neutral arch: amd64 pkt: 31bf3856ad364e35 verSc: nonSxS}, iMode = 1, = 2 Iaccess, iOption = 1, target = NULL, context = NULL, namespace = {name: worm Microsoft-Windows-Shell-Setup: lang: neutral arch: amd64 pkt: 31bf3856ad364e35 verSc: nonSxS})
  [gle = 0 x 80004005]
  2014-09-25 13:27:02, error CSI 00000002 (F) 8022000 b [error, facility = FACILITY_STATE_MANAGEMENT, Code = 11 (0x000b)] #4 # to CUnattendDeserializer::ProcessComponentElement (...) [gle = 0 x 80004005]
  2014-09-25 13:27:02, error CSI 00000003 (F) 8022000 b [error, facility = FACILITY_STATE_MANAGEMENT, Code = 11 (0x000b)] #3 # to CUnattendDeserializer::ProcessDocument (...) [gle = 0 x 80004005]
  2014-09-25 13:27:02, error CSI 00000004 (F) 8022000 b [error, facility = FACILITY_STATE_MANAGEMENT, Code = 11 (0x000b)] #2 # to CUnattendDeserializer::Deserialize (stream = @0x3d6430, engine = @0x3af8f0, target = NULL, results = NULL, resultCount = 0) [gle = 0 x 80004005]
  2014-09-25 13:27:02, error [setup.exe] LoadSMISettings: failed to deserialize the workflow settings. status 0x8022000b
  2014-09-25 13:27:02, error [0 x 060433] IBS has encountered an internal error when trying to validate the unattend file. status = 0x8022000b
  2014-09-25 13:27:02, error [0 x 060566] IBS Callback_Unattend_InitEngine:Setup has encountered an internal error during loading/validation of automatic file [C:\windows\Panther\unattend.xml]; HR = 0x8022000b, hrSearched = 0 x 1, hrDeserialized = 0 x 0, hrImplicitCtx = 0 x 0, hrValidated = 0x8022000b, hrResult = 0 x 0
  2014-09-25 13:27:02, error [0x0600c2] IBS Callback_Unattend_InitEngine: an error occurred finding/loading of the unattend file. HR = 0x8022000b, hrResult = 0 x 0

  Hello

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Anwser file for HP OEM Installation OOBE does not.

  Goodday,

  I need to deploy 20 HP Workstation Z210 around my business.

  I have prepared an Z210 I like too. Then I did Sysprep on the Windows 7 Installation.

  With Windows deployment services, I took the image off the power.

  Now I have a good image for the 19 Z210.

  I had an answer for the OOBE file.

  But the problem I have is that the HP OOBE ask with Windows language I want.

  And I can not find the right answer for this in Windows System Image Manager.

  Does anyone have experience with this?

  I have no personal experience with sysprep and answer files without assistance for OOBE but this thread phpcs.com entitled "Windows 7: Unattended Windows OOBE after Sysprep", may be what you're looking for. ' "

• Customizing OS error

  I have a script that I run against my Production and development environments to automate the generation of servers from a template.

  The code is:

  $vcenter = to connect-VIServer $vcenterName

  $vHost = get-VMHost-name $vmHost
  Get-OSCustomizationSpec-name $osCustomization | New-OSCustomizationSpec-name "oscustTEMP" - Type not persistent
  Get-OSCustomizationSpec-name 'oscustTEMP ' | Get-OSCustomizationNicMapping | Game-OSCustomizationNicMapping - IpMode UseStaticIP - IpAddress SubnetMask - $subnetMask - passerelle_par_defaut $defaultGateway $ipAddress - Dns $dns
  $vTemplate = get-Template-name $vmTemplate
  $vDatastore = get-Datastore-name $vmDatastore
  $vFolder = get-file-name $vmFolder

  
  New-VM-name $vm - model $vTemplate - OSCustomizationSpec "oscustTEMP" - location $vFolder - VMHost $vHost - data $vDatastore store - confirm: $false
  Start-VM VM - $vm - RunAsync

  Disconnect-VIServer $vcenterName - confirm: $false

  When I run the present against the Production environment virtual machine builds fine, but when I run it against my development environment and after the vim.event.CustomizationSucceeded I get the following error on the virtual computer:

  "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file to pass [oobeSystem]. Apply the settings specified in the answer file ACITN. The error was detected when processing settings for component [Microsoft-Windows-Shell-Setup]. »

  However, I do a deployment of the model and select the same OS customization manually I do not get the above error and it works. It seems as if it may be a problem with the New OSCustomizationSpec?

  Any help would be greatly appreciate, please let me know if I need to provide more details. The two environments are vCenter 5.1, 1123961.

  I think I found the problem

  in the error screen if you press SHIFT + F10, you will go to the cmd there prompt access c:\windows\partner and unattended.xml. I found that the clear text password has been marked true but password was actually in encrypted form. the work was about. Export the custSpec change the clear text password and mark the header as true and execute personalization again. I hope this will solve your problem. It worked for me