Windows XP VM recognises only 3 GB of RAM when administered 4GB

Similar Questions

• Why check a memory that I ran I have only 768 MB of RAM when the specs say I have 1 GB of RAM?

  Original title: why a check programi ram memory I have only 768 MB of RAM when the instructions accompanying it, say I have 1 GB of RAM

  Why a memory check I ran say I only 768 MB of RAM when the instructions and even the sticker on the computer I have 1 GB of RAM?

  It is devoid of 256 MB, if you have 4 sticks up to 256 MB each (total 1 = 1024 MB) means 1 stick could be dead. You can try to clean the slots or reinstall the sticks.

• Satellite Pro A60 - Windows XP shows / use only a part of RAM available

  Hello guys!

  I am facing strange problems with one of my two A60s. I just upgraded two of them with 1024 MB of RAM the same. One works perfectly, but the other will show me only 410 MBs in Windows. The BIOS indicates the correct size. I changed the RAM from one to the other, but this strange error is always present. The version of the BIOS has been updated to 1.90 and has Windows XP SP2.

  Do you have any suggestions or ideas? Is there an easy way to put the management of RAM in Windows?

  Thank you in advance!

  Ralf

  It s very strange.
  I found that an additional Satellite Pro A60 info has been delivered with a different hardware configuration.
  Some A60 Pro comes with an internal memory of 512 MB and others with only 256 MB internal memory.
  In addition, the internal memory modules cannot be deleted and there is only one slot for memory upgrade.

  But I put t know why the OS shows only 410 MB

  Oh, I forgot to mention that the graphics card, also use the part of the main memory and, therefore, the operating system of shared memory could indicates a value of different memory.

• Windows Media Player will only play a sound with no video .avi and .mov

  I started having a problem where the Windows Media Player will only play the audio portion of my .avi and .mov video files.

  These files were created by my FlipCam or my Sony Handycam.

  I never had problems until recently and think that it is due to some kind of Windows Update.

  Both my computer and my wife's computer had the same problem and we are both using Windows XP Home Edition.

  I apologize if this topic already on this forum.

  Thanks for any help and advice.

  CoDec = compressor decompressor.
  A program is used to compress the file. You then need to unpack the file to play, you need the codec used to compress the file to decompress it on your pc.
  You need DVD playing software installed to power the mpeg codec, or you can buy a codec to just run in media player.
  AVI is a wrapper and may well contain more than 800 different file types, it has 800 different codecs!  Thus, to read an avi file, you should know what codec was used to do and have that installed on your pc to read.
  DV.avi is made with the dv codec, divx.avi is made with the divx codec.
  Of course, that manufacturers make their codecs, you must make sure you have the latest being, to be able to read files made with it, so everything just because you downloaded the codec divx 12 months ago does not mean it will play files created with codecs of today!

  I hope this explains it is ok for you.

  It surprises me that you say that you have downloaded all the updates of altest, but are still running wmp9, where we are now on WMP11 for XP and 12 for win7.

  I would update my WMP version first.

  Here is a page that will tell you that the codecs are on your pc and who has access to WMP 11.
  http://www.myvideoproblems.com/tutorials/HowToFindCodecs.html

  Here is a page that will tell you how to know what codec was used to create the file that you are trying to watch and also if you have the right codec for it
  http://www.myvideoproblems.com/tutorials/AVIcodec.html

  It is generally accepted that the codec packs adding is a bad idea, so if you need a codec to read a certain file, google it's manufacturer and just install the one you need.

  I would work just on the pc at the same time when you found what the problem is, you can fix on the other 2.

  Need more help with this, just ask.

• Windows Sidebar is the only open part

  Original title: windows sidebar

  my windows sidebar is the only open part how to reinstall the sidebar?

  Hi JohnRobinson,

  1. you receive messages or error codes?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  You can read the following article and try the steps:

  How to restore the sidebar of Windows?

  http://support.Microsoft.com/?kbid=963010

  Step 2:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Can I use all 500 GB on a hard drive, I have install windows 7 and it only uses I think 466 around this amount, why is - this

  Can I use all 500 GB on a hard drive, I have install windows 7 and it only uses I think 466 around this amount, why is - this

  Hello Edtannjr,

  Thank you for your message.  Remember that the operating system itself takes place and many OEM systems contains a recovery partition which can take up to a space as well.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer button shows only libraries

  A few days in a new pc with new to me Windows 7 and the Windows Explorer button suddenly only shows 'Libraries' records and files recently viewed. How do I show the full c: / drive once again, with my Photos, etc., and usb drive E when you use)?

  1. first of all, you will need to open Windows Explorer shortcut properties. If you want to change the folder target of the shortcut in Explorer Windows that is pinned to the taskbar in Windows 7, press the 'SHIFT' key and right-click on the icon in the taskbar. It will open the Windows XP/Vista old style context menu where you should select the option "Properties".

  Alternatively, you can right-click on the icon that will show the jumplist. Now, even once with the right button on the entry of "Windows Explorer" presents in the jumplist and select the properties option:

  For the other shortcuts in Windows Explorer as a shortcut in all programs menu or in the office, you do not have to press the SHIFT key. Just right click on the shortcut and select Properties.

  2 once you open the properties of the shortcut, you will see %windir%\explorer.exe written text in the targettext box. You just need to change this text string to customize the destination for the Windows Explorer shortcut folder.

  To open the my computer when you click on the Windows Explorer shortcut, just add an blank space, and double quotes ("'") at the end of the text in the text box target as shown in the following screenshot:

  

  If the entire text string would become %windir%\explorer.exe ""

  That's all. Now whenever you click on the Windows Explorer shortcut, it will open the my computer window instead of displaying the default libraries.

  3 if you want to set the target to a drive or folder, do not add double quotes. Just add the path to the end. By example, if you want to open the C: drive on the target%windir%\explorer.exe C: text string or if you want to open a folder e.g. D:\Setup, then set the text string target on %windir%\explorer.exe D:\Setup

  You can see its very simple and easy to change the shortcut to Windows Explorer startup folder in Windows 7.

  NOTE: You can also use environment variables to change the folder target to the Documents folder, profile folder, etc. You can get the complete list of all the variables of environment here.

  PS: If you want to restore the functionality of Windows Explorer shortcut and want to open libraries once again, simply remove newly added text in the target text box strings and assign %windir%\explorer.exe again.

• Download Windows 7 Pro academic only OA - X 16-96076

  Hello

  I have the link download Windows 7 Pro academic only OA - X 16-96076 - on a Toshiba Satellite Pro C660 - 2 D 9 part No. PSC1ME-00S00R1G.

  Of course, I do not have data on the backup otherwise drive that he would have already reinstalled :(

  Can you help me find this link please?

  Thomas

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Windows Easy Transfer can only transfer files

  I created an easy transfer file in my previous installation of Windows 7 Ultimate 32 bit. After formatting and installing Windows 7 Ultimate 32 bit even once, I got the following error:

  "Windows Easy Transfer can only transfer files

  Your easy transfer file was created on a computer that is running a different language than this computer. Windows Easy Transfer only transfers files between computers with different languages. Settings will not be transferred. »

  The problem is that the two facilities were in English...

  -What can I do to solve this problem or my parameters are irretrievably lost?

  You can see your language here: HKLM\SYSTEM\CurrentControlSet\Control\CMF\SqmData\BootLanguages. Are the same in the two versions of Windows?

• Windows - zone - Les - update only not to + 4 h

  Hi, I installed a few copies of windows costs however the zone we have for Port-Louis is + 04:00 on the system but when updated with time.windows.com, time is only updated with + 03:00.

  I have to change it in Abu dhabi to get the correct time zone. I understand that it is a major issue however that I am a citizen of Mauritius and use many Microsoft products, I would be grateful if someone can review and amend the need or advisor.

  Thank you

  TJ

  You may need to update the time zone definitions (the dates of entry into force this time and back) in your copy of Windows.  A September 2014 update is available on the following Web site:

  "A September 2014 for the Russia time zone update is available"

  <>http://Support2.Microsoft.com/kb/2998527/en-us >

  If this does not help, you can manually change the zone data using the program "TZEdit.exe.  To do this, go to this site:

  "How to configure daylight saving time for Microsoft Windows operating system"

  <>http://Support2.Microsoft.com/kb/914387/en-us#m2 >

  Then go down to the "More information" section and expand the "how to configure the daylight saving time settings.  Then expand "method 2: change the time zone on a single computer settings.  At the bottom of this article is a link to the time zone Editor.  Then follow the instructions in "Method 3" or "4" method.

  HTH,

  JW

• How/where to buy the Windows 7 activation key only?

  How/where to buy the Windows 7 activation key only?

  Unfortunately, digital downloads of Windows 7 no longer exist. It was the only way you could have acquired Windows 7 as a key of product only.

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Version upgrade - Microsoft Windows 7 Ultimate Upgrade

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

• Windows says 6 GB usable only 4 GB of ram

  My bios says I have 6 GB of Ram installed and when I checked my ram under windows he says 6 GB usable I use windows 7 Home premium 64-bit only 4 GB of ram. Is there a setting to make it work with 6 GB of ram

  Hi Keefy1,
   
  On a computer that is running a 64-bit Windows 7 version, usable memory may be less than the installed memory (RAM).
  
  This is expected behavior on computers that are running Windows 7. The reduction in available system memory depends on the configuration of the following:
  1. the devices that are installed in the computer and on the memory reserved by these devices
  2. the ability of the motherboard to manage memory
  3. the BIOS version and settings
  4. other system settings
   
  To see how it is allocated the memory installed in Windows 7, follow these steps:
  1. click on start, type in the box resource monitor search programs and files, and then click Resource Monitor in the list programs.
  2. click on the memory tab and then view the physical memory section on the bottom of the page.
   
  There are several additional situations that could cause the usable RAM is less than expected. These issues and possible solutions are listed in this article: http://support.microsoft.com/kb/978610
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today and failed.

  I had a lic 3. copy of windows 7, I used only 2 lic. I tried to activate the third today (06/25/13) and failed.

  Original title: activation error

  It is not uncommon for users who have a 'Family Pack' of Windows 7 to find that the 3rd install does not activate.  You should be OK, but you will have to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Cannot install Windows on this disk selected disk.the has a MBR partition table. On EFI systems, windows can be installed only on GPT disks.

  Cannot install Windows on this disk selected disk.the has a MBR partition table.

  On EFI systems, windows can be installed only on GPT disks.

  When I try to install WS2008R2 in my turn lenovo G580 i5-3210 as a dual-boot option.

  Hello Pratap ReddyBh,

  As you try to install Windows Server 2008 R2, it would be better for you to ask your question in the TechNet Windows Server forums.
  Click on the link here for TechNet.

  Thank you

  Marilyn

• Windows 7 on Netbook Dell - memory-2 GB (1 GB usable) - why should I use only 1 GB of RAM? How can I make all 2 GB usable?

  I have a Dell Inspiron Mini 10v Netbook. It came with 1 GB of RAM and Windows 7 starter. Took me to upgrade to Windows 7 Ultimate and it's much better. Given that the memory was only 1 GB I installed a 2GB chip instead. The BIOS of the computer/is happy with it, but Windows 7 will use only 1 GB of it.

  Resource monitor scored the extra 1 GB has "reserved equipment." They have no reserved before the addition of the extra RAM.
  I want to use all my memory! Help!

  Hi pcstan

  I would like to know what version of the operating system are you using? It is 32-bit or 64-bit?
  You can try the following methods: -.
  1. change setting memory remapping in BIOS. This setting can have different names, look at the motherboard or computer manual.
  2. run msconfig.exe. Under Startup go to advanced options and change your maximum memory available.
  This can help you
  Concerning

  Vipul Taneja. http://www.vipultaneja.com