"WindowsUpdate_8E5E03FB" "WindowsUpdate_dt000"

Similar Questions

• 4 results for "WindowsUpdate_8E5E03FB" "WindowsUpdate_dt000"

  NEED SOLUTION TO INSTALL WINDOWS VISTA UPDATES. ALWAYS INDICATE AN UNKNOWN ERROR AND CANNOT INSTALL

  Hello
   
   
  Let us know what you have already done, the security software installed on the computer and the updates that are available for installation.
  
  Follow the steps mentioned below:
  (I) check if Windows update-related services are set to automatic and started.
  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.
  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update
  
  (II) rename the Catroot2 folder
  To rename the Catroot2 folder, follow these steps: 1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:
  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output
  3 remove all tmp*.cat to the following folder:
  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
  
  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.
  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
   
  (III) Re-register DLL files that are associated with Cryptographic Services
  To register .dll files that are associated with Cryptographic Services, follow these steps:
  1. start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  
  2. at the command prompt, type the following commands and press ENTER after each command:
  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  
  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output
   
  Note: Click OK if prompted.
  Restart the computer.
  
  (IV) empty the software distribution folder
  1. start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.
  Note by default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.
  Article number: http://support.microsoft.com/default.aspx/kb/822798
  
  (V) disable the security software
  Temporarily disable the security software and check.
  (VI) scanner SFC
  
  Please follow the steps below to the auditor of the filesystem as the first steps:
  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.
  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• updated computer then error 'WindowsUpdate_80072EFE' always rises, if that had for months now__and the update itself is "WindowsUpdate_dt000".

  updated computer then error 'WindowsUpdate_80072EFE' always comes if it had for months
  and the update itself is "WindowsUpdate_dt000" Please help me! :)

  Which edition of Windows and what level of Service Pack is now on?

  IF it is Vista or Windows 7, open a command prompt
  Click the start ORB, type cmd in the search box
  Under programs, click on cmd.exe and select 'run as administrator '.
  If a password is used to enter it and then click OK. If no p/w is used, click on the button continue
  At the command prompt type the following and press enter

  netsh winhttp see power of Attorney

  If there is a proxy used then it will show slot next to Server Proxy (s)

  Current WinHTTP Proxy settings:
  Server proxy (s):

  To remove the Proxy Server, at the prompt, type in the following and press enter

  netsh winhttp reset proxy

  Now type exit, press ENTER to close the command prompt.
  See if the system can update now.

  Proxy is sometimes used if a suite of security or the 3rd party firewall (not the native firewall on Vista/Win7) is installed or if the installed antivirus is configured to analyze incoming e-mails.

  MowGreen Services consumer safety update

• WindowsUpdate_80070643""WindowsUpdate_dt000"

  I use Office 2003 on my new Machine of Windows 7 and when I try to download 3 updates I get this error message. "WindowsUpdate_80070643" "WindowsUpdate_dt000"three updates are updated Office 2003. " I found a site that suggested the OSE Ofiice. Exe may be corrupted and need to be replaced form CD. I tried this but Win won't let me copy or paste the new file. Says I need administrator privileges to do this. I AM the administrator. Tried several microsoft suggested. so love my new machine and Win7 so far! Except f0r this hiccup. Help, please! My not be a big problem, but I'm a freak when it comes to everything working properly.

  Thank you!!!

  Hello Kbores,

  Thank you for using the Microsoft answers Forums.

  Solution for 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100
  http://support.Microsoft.com/default.aspx/KB/976982

  http://www.networknet.nl/apps/WP/archives/324

  Follow the steps in the web links above to solve the problem.
   
  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO. C

• "WindowsUpdate_8024200D" "WindowsUpdate_dt000"

  Set to automatic update tried 5 or 6 times (after restart) to install KB967723. It gives the error next "WindowsUpdate_8024200D" "WindowsUpdate_dt000"
  What I can do. Operating system is Vista Ulitmate 64

  Hello

  Download the KB967723 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b2930ff1-5f0a-4A5D-bf2a-9fb76dd8da63&displaylang=en

  Restart the computer in safe mode by pressing f8 at startup.

  Install the update in safe mode.

  Restart in normal mode.

  See you soon,.
  Raymond

• Error "WindowsUpdate_80070663" "WindowsUpdate_dt000" Windows 7

  I got this error

  "WindowsUpdate_80070663" "WindowsUpdate_dt000"

  When you try to install the new updates.

  I am running windows 7

  I feel totally blocked and I need help URGENT =)

  Thank you!

  Try resetting WindowsUpdate. If this does not help, try to insert your Office CD while installign updates. If this does not help, remove Office 2007 and install it again. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• WindowsUpdate_80070BC9""WindowsUpdate_dt000"

  I have a problem in this update it is not let me update and load. It is an update of the posting, but I am a partner with Microsoft and the computer is up to date... " WindowsUpdate_80070BC9" "WindowsUpdate_dt000"

  Hi Clexton,

  ·         This error occurs with a particular update?

  1. annotating the updates listed in the updated view. Steps to follow:

  i. Click Start, in the search box, type in update

  II. click on windows Update

  III. click view update history

  Try to download the standalone version of the update and I install in safe mode. You can download the stand-alone version of the below link with number: http://www.microsoft.com/downloads

  You can check the link for the procedure to start your computer in SafeMode below: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  2 disable any third-party antivirus installed on your computer temporarily protection software and check if this is useful, if the issue is resolved, then you will need to uninstall the antivirus software and install it or change the settings of the same return.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update, error 80200010 # WindowsUpdate_dt000

  The message referenced above is the error in trying to fill three 3 important updates to my computer, I received.  Two 2 updates installed correctly and completely, however, one (1) does not.  In chicking on icon troubleshooting he, I will put this error message "WindowsUpdate_80200010" "WindowsUpdate_dt000"  What does this mean and how can I fix this error and get this update loaded on my computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80200010

  If Windows Update error 80200010 during updates, this means that the Background Intelligent Transfer Service (BITS), cannot access the Internet. This service is used to connect to the Windows website and download updates to your computer.

  To fix this problem, make sure that your computer is connected to the Internet and check for updates again. To easily see if you are connected to the Internet, point to the network icon in the notification area and wait until you can see the status of your connection. You will see the name of your network or the service to which you are connected and the type of connection you have. If you are on a company or home network, you should see the message access: Local and Internet.

  I figured Vista in this case.

  For info: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  TaurArian [MVP] 2005-2010 - Update Services

• Could not update "WindowsUpdate_80070663" "WindowsUpdate_dt000"

  "WindowsUpdate_80070663" "WindowsUpdate_dt000" Why can't so far?

  This error translates as 'the patch package could not be opened. "

  The first thing I would say when troublehsooting this error is to run the following command from an Admin command prompt.  This is going to re - register the Windows Installer service.

  1. click on start / run and type CMD and press on enter
  -In Vista, press Start, in the search box, type CMD and right click on the command prompt that appears above, choose Run as administrator
  2. type the following command "MSIEXEC/REGSERVER" and press enter
  3. close the command prompt window, restart the computer and try the update again

  If it still fails, try the following solution below.

  I saw some people to solve their problem by using the Windows Installer Cleanup utility to remove the application in question (Microsoft Office, .NET Framework 3.5) then reinstall the application, then try the updates again.

  See the following article:

  http://support.Microsoft.com/default.aspx/KB/932857

  The article details that you must remove the Microsoft Office registry entries, and then reinstall Microsoft Office.  If you encounter the problem with .net Framework 3.5 updated partners updated, try to remove the .net Framework 3.5, then reinstall .net Framework 3.5, and then reinstall the update.

  I hope this helps.
  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• "WindowsUpdate_80242016" "WindowsUpdate_dt000"

  Hello

  I tried to install Vista SP1 three times and whenever it goes through the whole process to the point where it restarts and says '100% ' complete, he then said failure of the upgrade and unistalls all this. When I go in the update history it gives me the error message "WindowsUpdate_80242016" "WindowsUpdate_dt000", it's really me naffing off, can someone he goes outside for me please, my AVG is turned off during the process.

  Thank you

  Take a look at this thread, it discusses the error you see and has a solution. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WindowsUpdate_80072EFD""WindowsUpdate_dt000"

  "Problems with Windows Update for Vista update, continue to receive the WindowsUpdate_80072EFD error code" "WindowsUpdate_dt000." Can someone help me?
  I appreciate any suggestions.   Thank you

  See...

  • You may encounter temporary connection [e.g. 0x80072EFD] errors when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

• WindowsUpdate_8E5E03FA""WindowsUpdate_dt000"

  I can't get windows to install updates. I get the error "WindowsUpdate_8E5E03FA" "WindowsUpdate_dt000" head to the help and support that tells me absolutely nothing. How can I solve this problem?

  I already fixed it. None of your suggested courses of action worked. You cannot run the commands net stop Vista stated that I don't have permissions on the system. Strange, because I am a member of the Administrators group on the local computer? In any case, what I did to fix the problem, it was go into the MMC console and stop the cryptographic service. Then I renamed the folder Windows\system32\catroot2 \catroot2old. Rebooted the system and he forced windows to regenerate a new catroot2 folder. To restart that I forced windows update to search for updates, this can take a long time, up to 3-5 minutes in my case. Windows Update showed me the missing updates and this time they installed properly. Restarted again after updates.  It took a long time for the system to shut down, but must let it stop by itself. On reboot, everything works fine now. I suspect that it is a Windows Vista Service Pack 2 problem as I had no problems until after I installed it. I remembered some clients of mine had this same problem with Vista SP1, and this is how I fixed it.

• Cannot install the winodws updates! Really need help! ___Error code: "WindowsUpdate_80242014" "WindowsUpdate_dt000" _

  Hello! I'm not very good in English but I'll give a try!

  Yesterday when I tried to install som updates failed.

  They have the status 'pending' instead of 'done '.

  Windows Update can't find them if I find them again.

  I tried to install this update manually, and they said "this update is already installed"

  Error code: "WindowsUpdate_80242014" "WindowsUpdate_dt000"

  Please help me!

  I got a blue screen yesterday, maybe because this wherent updates installed correctly?

  Hi Molphyr,

  Let us know the edition of Windows that is installed on your computer and the error message you received on the blue screen.

  Meanwhile, try to reset the windows component update and check if it works.
  For more information about resetting the windows components Update, click here

  I hope that helps!

  Kind regards
  Abdelouahab

  Microsoft Answers Support Engineer

• "How can I fix this error of update > > WindowsUpdate_80070645" "WindowsUpdate_dt000"

  "How can I fix this error of update > WindowsUpdate_80070645" "WindowsUpdate_dt000"

  Hi Wesfay,

  1. what version of windows is installed on your computer?

  2. the updates fail with errors?

  If you are running windows Vista, you can try to reset windows update components. Open the link below and click theFIXIT .
  http://support.Microsoft.com/kb/971058

  If you run windows 7 try to run the windows update troubleshooter.

  Open the Windows Update troubleshooting tool by clicking theStart button, then Control Panel. In the search box, typeTroubleshooting, and then click Troubleshooting. Undersystem and security, click fix problems with Windows Update. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  In addition to the steps above I suggest you follow the suggestion provided by Sortiarius in the thread below link that addresses the same error code.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a3a127a3-2dc5-42B9-8cd7-87e750a5a442

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WindowsUpdate_8007371B""WindowsUpdate_dt000"How can I solve this problem

  "Windows Update installation error: WindowsUpdate_8007371B" "WindowsUpdate_dt000" how to solve this problem?

  Allan Storjord

  Hi Allan Storjord,.
   
  1. What is the name of the update?
   
  We recommend that you download the standalone update files and install in safe mode. To do this, try the following steps.
  Step 1: Run the system update tool
  a. connect to the computer as an administrator.
  b. see Update tool for Windows system
  c. download the just update package for your windows.
  d. install the update successfully, then restart the computer so that the changes take effect.
   
  Step 2: Check the history of installed updates
  a. see Windows updates that are installed
  b. check the number of the update.
   
  Step 3: Locate the stand-alone file of the update
  a. visit http://catalog.update.microsoft.com/v7/site/Home.aspx
  (b) in the search box, enter the update number, and search for the update.
  c. download the update just for your windows and save it to the desktop.
   
  Step 4: Start the computer in safe mode and install the updated successfully
  a. see start your computer in safe mode
  b. open the downloaded update file and install one by one.
  c. restart the computer so that the changes take effect.
   
   
  Visit our Microsoft answers feedback Forum and let us know what you think.