Winmm.dll error on windows xp

Similar Questions

• Windows 7 Twain_32.dll error in Windows 7

  I put it under "Windows 7 Pro Twain error" but no answer - so I'll try again.

  I have a problem with a player wireless network Epson Twain_32.dll. With this scanner you apparently have no driver in itself if you seem to be impossible to remove the driver, you must remove the program from the list of programs and then re-load the Analyzer disk from the supplier program.

  Whenever I do and then try to scan, I get "missing or damaged Twain_32.dll".

  The provider insists that it is a Windows problem.

  According to responses to other similar topics in this forum I renamed (rather than deleted) the Windows/Twain_32 folder and there is also a Windows/Twain_32.dll file that I also renamed.

  I rebooted (cold) and get the same problem.

  I see that somehow a new Windows\Twain_32 file has been generated, but is no longer a Windows\Twain_32.dll file C:\Windows\.

  I am at a loss I can then do with this machine.

  Please help if you can!

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  Let's try the methods below and check.

  Method 1: Rebuilding the icon cache

  a. in Windows Explorer, open the Windows folder.
  b. remove all files starting with 'Twain' or "Twunk" (for example, Twain_32.dll).
  c. remove all files starting with "Twain" (for example, Twain_32).

  d. restart Windows.

  e. the icon cache has been rebuilt.

  Method 2: Try to run the installation in a clean boot state and check if it helps.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Run dll error: c:\windows\system32\werconcpl.dll

  My computer took a long time to start now, after I entered my password to log on, the screen goes dark forever and finally he said something about a Run dll error: error c:\windows\system32\werconcpl.dll conducting a paging operation and it still doesn't let me start the computer. What is the problem here and how can I solve this problem? Thank you!

  Your PC from a manufacturer of large surfaces, for example Dell/HP and if yes to the first startup, in the first screen before winning, is there an option to run this diagnostic to the?

• "ajiloruz.dll" error on Windows XP Startup.

  Original title: error at startup of Windows XP

  He also says at the start, error, ajiloruz.dll. What is c? Can someone help me get this resolved immediately too! I appreciate it. Thank you.

  I have download Autoruns and remove the element. It rises more. I have nothing else like you told me to do. Just downloaded Autoruns. Thank you!

• msvcp120.dll error in Windows 10

  I just upgraded to Windows 10 and now get an error "msvcp120.dll" when I try to open one of my Adobe products. Any suggestions?

  Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html

  or

  Win10 LENGTH https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679

• Run DLL error Windows 8 on laptops HP 2000

  When starting the laptop of HP 2000 using Windows 8, I get DLL error run there was a problem starting c:\\users\judy\appdata\local\conduit\backgroundcontainer\backgroundcontainer.dll the specified module could not be found.  I installed Norton Security software. I don't know what is this error or how to fix it! Any help would be appreciated! Thank you!

  DLL errors appear when the DLL is damaged, and it gets damaged due to the registry database. When the registry keys concerned is corrupt then it affects the DLL file and so that the error message appears. So to fix this error, you must set the registry key corruption. Apply any registry repair tool and fix DLL errors directly.

• DLL from the Windows API (user32.dll) causes a fatal error

  Hello
  On installation, we using a touch screen. LabView software is running in full-screen. I need to deactivage my Panel before if the screen saver is to warn the user start anyting. I use user32.dll SystemParametersInfoA and it works well, except, if I left the software. "myexe a fin a mistake and should be closed" (something like that my XP is in french).

  I have no issues in debug mode, this error happens in exe mode.

  I use LV 8.6.1. Do you have any idea why?

  Thank you

  CFiset wrote:

  Thanks, I'll take care of the details. But unfortunly, it does not.

  uint32_t SystemParametersInfoA (uint32_t SPI, uint32_t 0, uint32_t * value, False uint32_t);

  SPI = 114 = SPI_GETSCREENSAVERRUNNING

  If * value! = 0, screen saver, ON the other scresaver OFF

  Still have the fatal error of Windows.

  Thank you

  I noticed the node having a rather odd way of user32.dll on the initial load of the library call. You happen to have copied this DLL somewhere and SEO with full path to your VI?

  It is a very big NO-NO! User32.dll and several other Windows system dll weird for the system and are all bad behavioured if you try to load another copy elsewhere on the disk as the system directory. Just rename the user32.dll library only and let Windows choose the good DLL from the system directory.

  Another problem with specifying the full path to a copy of such a DLL, it of that LabVIEW you will think that you must have this built application-specific DLL and will include it in the build. However your user32.dll is almost 200% VERY incompatible to any other Windows system there, because of the Windows Service Pack version and upgrades of the correction of a bug, as well as different versions of Windows.

  Rolf Kalbermatter

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll

  After update my PC with the latest patches I started getting the following error message every time I reboot:

  Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll
  Entry: rundllentry

  I know it has to do with my Dell printer and I have uninstalled and reinstalled the printer, but keep getting the same error message. What is the cause and how to fix?

  Hello

  See this message from Dell - even if the models are different ago probably similar
  problems with your computer and your printer. http://support.Dell.com//support/topics/global.aspx/support/DSN/en/document?c=JM&DL=false&l=en&s=Gen&docid=28E393B4B4A5ADEEE040A68F5B2849AA&doclang=en&CS

  Check with Support from Dell and their forums.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  ------------------------------------------------

  These could help however check with 1 Dell.

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows root > \system32\hal.dll error on a laptop without cd player or cd when bought

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Fortunately, not all is lost here for you. You have several options. You will need to create a CD of the utility. (1), you can boot from a usb flash drive and run utility Cd or 2) you can buy a removable usb device cd rom and there. It's the best option, but instructions differ radically, so I need to know which is your choice of boot options to help you. You won't have a windows disk to perform the procedure.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• I notice on my screen when Windows XP starts, it reads: load the dll error, below him, he reads: Can t Load Res-dll, less than OK

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  Hi Mike... When the pop-up window appears at the top of the pop-up window, it should tell you the name of the software that is associated with the dll missing/corrupted. Please look and see if it is listed, and then tell us what software. Make sure that you list the full error message.

  In addition, do you use a Linksys router to connect to the internet? You should also do a scan with Malwarebytesmalware. It doesn't matter what other scanners you used. Scan with Malwarebytes. Thank you.

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• @ Startup error: < root Windows > \system32\hal.dll.

  A "highly recommended" malware free program apparently deleted a file system.

  After the reboot, I received this message at startup:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll.
  Please reinstall a copy of the above file
  So the question is... How do I re - install the hal.dll file when I can't start the computer... Download USB?
  Hi thomasm.
   
  Follow the steps listed in this article to resolve the problem:
  Error message: Windows has not start because the following file is missing or damaged

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

  original title:. Error loading windows

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

  Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

  First of all, download, install, update and scan with these two free utilities:
  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

  Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.