Wired E3000 for maximum transfer of 10 MB/s

Similar Questions

• Best options .vmx and config.ini for maximum security of the host

  Hello.  The most effective way to keep your private data is by keeping it on a separate computer that is not connected to the internet.  Better yet, only transfer files to and from this computer using usb flash drives, not network.  I would do the same thing with vmware player.  The guest would be used for navigation and connected to the internet via a usb cable rather than fill the host's ethernet card.  The host would be the private computer that has a connection to the internet.  It will have all the tcp/ip or other network completely removed features.

  The only means of communication between the host and the guest will be a usb flash drive.  The guest would be without a hard drive, a liveCD of linux, which would only have a disc temporarily when you connect the USB flash for it.  It goes without saying that you should not connect usb flash to the guest after navigation in a dangerous site.  Or even any site unrelated to download just one you want to record to the host.

  But I've heard there are always ways to invade privacy, something to do with the Clipboard, pagefile, exploits, etc., and most can be combated by configuring the .vmx or config.ini for maximum security options.

  Does anyone know what are the options in the .vmx or the config.ini file should be used for maximum security, to complete isolation of the host?

  It is good to hear Hat based project.

  The problem with the on-board unit is often a wrong configuration (such as keeping the default values). These devices can be operated directly from distance or indirectly via a host operated on the local network. Otherwise, the router is vulnerable directly from outside, a host on the local network can for example be targeted by an xss attack that targets more your router. SPI Dynamics from their publication a portscanner of javascript for the local network (search google for it). At www.gnucitizen.org, they have a lot of router base articles (some of them mention mesing with dns via upnp (scary stuff). Some links on this stuff;

  http://SecLists.org/fulldisclosure/2006/Aug/0097.html

  http://www.shoaibyousuf.com/2009/04/ciscos-Linksys-router-is-vulnerable-to.html

  http://www.packetstormsecurity.org/0801-advisories/HomeHub-UPnP.txt

  A misconfigured host on the local network can be devastating too. Remember a few years ago when the DreamBox became popular (it's actually a GNU / linux). No one hardly changed passwords by default and where wide open to the internet on port 21,22,23,80. Now connect to port 22 (ssh), meant you can use it as a proxy in the local network (to log into the router and do whatever, or target other hosts on the lan). Google search for it also.

  On MOA, it didn't is nothing other than a server stripped 2003 running as LocalSystem. It means that it is not patched and can be exposed to exploits more than servers entirely patches. It will, also, a pain in the back to add patches to such an MOU. Ulli you agree? However, given that the system is a version of server, there also fewer services that may be potentially vulnerable to exploits. If you have two vectors in the opposite direction, such a system could be on the vulnerability. To run patched systems entirely in the eye of the ram at http://www.disklessangel.com . By passing as LocalSystem, means that once exploitet, the operator can make preatty although, as opposed to less than a user of privilged in expoitet. Also ongoing execution in a State without drive, limit significantly impact the feat will do for your system (at least to vm (with bootkits in head)) that the malware disappeared on restart. However, if you where exploitet in ram, the attacker could still get all your personal information that you presentation while boot (just like as if you where linking the local hard disk (only difference don't have the disk in the next startup).) Once the network connection is cut off, even attach flash drives, will leave malware what what to do for your flashdisk, as always, there are in ram, expect that connect the disc (but is resolved naturally if reboot before you connect the flash). How would you be able to download and save a file in such a case?

  The next thing to worry about is the type of connection to your router. If through wireless it is a whole new world of expoits (xss for free/airpwn, breaking encryption, mitm, operator chipsets, etc.), so definitely go for ethernet cable.

  The decision of virtualized or not, my vote would go to non-virtual, as there is at least an attack vector less to worry about IE EP-mode pure diskless as MOA.

  BTW, what kind of project is this?

  Joakim

• Xbox 360 wired controller for PC

  Hello

  4 months ago, I bought an Xbox 360 wired controller for PC, I use it since a few games, but especially of the Fifa and recently, when I connect to 15 of Fifa, it detects 2 controllers instead of one and the controls were reversed as, as 2 controllers 1 controller-controlled and I can't fix it ,

  I already reinstalled the drivers, put it in the other USB Ports and I started to wonder if it's because of my windows, perhaps as an error that detects how, I would be very grateful if anyone knows a solution for this problem

  Thank you

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  With the help of the joystick Xbox 360 for Windows
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Info

  Set up your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-Setup

  Troubleshoot your Xbox 360 for Windows controller
  http://support.Xbox.com/en-us/Games/PC-games/Xbox-controller-for-Windows-help

  For most of the problems of Xbox:

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  Xbox - Feedback
  http://Xbox.uservoice.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Option for a transfer out of a direct number

  If we wanted to have a call handler and/or the option of voice mail for a transfer out of a direct number, is that possible? For example, the voicemail would push 1 if it is an emergency situation (which would be directly dial a cell phone outside) or press 2 to leave a message (which would be in the mailbox). If possible, how to reach us? We use unity 4.04.

  Yes, it is possible. Configure you another Manager to call with his other transfer rule enabled and configured it to dial the number (including the prefix outdial, of course). Then you must set the key ("1" in this example) user input to "attempt to transfer for" the call handler, you did. Then, the user can press "1" for your first call handler greetings and be transferred to the outside.

  I would set the transfer type to 'release' If you can - progress call for external phone systems can be sometimes fragmentary so supervised transfer is more annoying (but can be used).

  You can check the apper 'Applications of Audio text in unity' on the page of Documentation of www.CiscoUnitytools.com for much more on how to do things in the auto attendant of the unit - this article is a draft of one of the chapters of the book "Cisco Unity Solutions and Deployment Guide" fab - available in your book favorite store now...

• How to get a file for a transfer of license number?

  How to get a file for a transfer of license number?

  Thank you very much

  Kris

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• No server available for this transfer

  Hello everyone.

  I tested VMware View 4.5 with Local Mode.

  Environment:

  VCenter 2.5 and view composer 2.5 are installed on the same server.

  Connection to the Server 4.5 is installed on a Windows 2008 R2 (x 64) server. Sharing repository of transfer is open on this server.

  Transfer of Server 4.5 is installed on another server Windows 2008 R2 (x 64).

  Comments: XP SP3

  VMView with agent: XP XP3

  All servers are in the same domain. The network is good.

  Any client of this network can access VMware View desktop as the session remotely without any problem.

  When I try to start. I get this error at 88%:

  Local Mode operation StartTransfer failed for office xxx, ID: xxx. Error message: could not start the disk transfer: com.vmware.vdi.desktoptracker.MVDIOperationControl$ MVDIOperationException: no server available for this transfer. Please try again later or contact your system administrator.

  What is the problem?

  Thank you.

  Well... somewhere near the 88%, the forwarding server VM needs to mount the disk to the user access to the data store is necessary to the host that is running the virtual server computer transfer; When I look at the log files, you have posted, I see "no loan transfer server have access to storage to VM" and that makes me really thing that the user disk data store is not seen by the host that is running the server transfer.

  Can you try to login with the user set to the login server in vCenter and try to add manually hot a disc of the user on the server to transfer?

  -

• 2 GB WRT610N limit for file transfer

  I recently bought a WRT610N.  I have set up the binding of storage with a 16GB USB flash drive.  When tranfering the files on the drive among computers on a network, it gets to 2 GB exactly then the WRT610N stop the connection and file transfer fails.  I can mount the flash directly drive and the transfer of any size of file - then replace the drive on the WRT610N and it will allow this file to be copied off so I'm sure that's not the flash player.  I also tried several computers - and the transfer always stops at 2 GB.  FAT32 is a 4GB limit - so, I'm not hitting the limit of file system.  I use the latest firmware of the 21/01/2009 - who expressly mentions the solutions of the problems with the transfer of large files.

  Is anyone having the problem even ort know a fix for this?

  It is a problem of file system. FAT32 sometimes has a maximum file size of 2 GB.

  Try to reformat the drive in NTFS format, this will fix it.

  NTFS is unfortunately sometimes reliable and officially not supported according to the knowledge base (see answer id 17144), but sometimes you can operate

• on my MacBook Air how flip photo for Print transfer

  Please companion figure out how to return a picture to print on a sheet of transfer paper on my children's shirt?

  Is not a feature of pictures - export the photo on the desktop (menu, file == > export) and opened in preview and return the horizontal picture (menu Tools == > flip Horizontal)

  Or buy and install external editors for extension of Photos from the App store and use it to open the preview, then tilt the photo- Photo editing Extensions of Photos for Mac

  LN

• null for the transfer of text code

  When I click on transfer text message on my Iphone the message I get on my IPAD, when being invited to enter the combinaisonprincipale ' on this Ipad enter (null) code on your Iphone now!  What the hell is happening?

  After a long and frustrating day of fruitless troubleshooting problems of software that does not exist on my iPhone, I'm beyond frustrated with Apple. (It is the material, guys, is the material.  Once again.)

  So when I had to reset all the settings of my iphone and redo the transmission of text, and I had THIS thing stupid "null" on my iPad mini, I had it pretty well.  Ready to just sit and cry.  And then get an Android.

  I AM happy to tell you, if annabel, than putting out my iPad mini and put back on the fixed power.  I tried again and got a code normal, digital that I could work with.

  It's the simplest solution I had with Apple throughout the day.  So try to disable your iPad and then turn on again.  Hope that works for you.

• Parameters of BT for the transfer of all the BT settings to another user

  Hello
  I have a computer here in my conference room with several users to work on it (MS Active Directory).
  For the Conference, I have installed a 'PolyCom VoiceStation 500' as a device of helmet on the Administrators account. There the unit works fine, but when I log in as a different user, windows seems to forget all the settings made before.
  How can I get windows to transfer all the BT settings to another user (for example "all users" - profile)?
  I'm running on Windows XP Pro SP2 on an Optiplex G620.

  Thank you very much
  Ingo

  Hi Ingo

  Sorry, but I don't see in your composition of validation between BT and Toshiba. Do you use a Toshiba designed BT Stack?

• My Macbook air does not appear in the list of available devices for the transfer on my iPhone text messages. How can I fix it?

  I'm trying to get my message text sent to my laptop on iMessage. I used to have this set up, but once I signed into my account icloud on a computer at work, message, offering to my personal computer has stopped. I tried to set up again, but for some reason, my laptop does not come as a potential device for transfer of messages. My personal laptop is recorded as a unit under my account iCloud but not iMessage. How can I fix this so I can receive messages on my cell phone again?

  Are signed in the Messages on your Mac application using the same Apple ID as on your phone?

• USB-6218 for PC transfer speed

  Hi guys,.

  I hope to be able to taste 10 channels 10 Hz for about 1 hour, in Labview 8, on a relatively new core dual desktop PC.

  First, I tried an Agilent34970a and concluded that, even if she can continuously scan quickly enough, GPIB in Labview transfer speed was too slow and the PC could not follow.

  So I intend to implement a continuous sweep on a USB-6218 and then read it via USB, time-stamped data in Labview.

  After reading about OR "sample streaming usb", my question is: approximately how long will be the transfer of data via USB? I'll be able to transfer time-stamped 10 channels at 10 Hz continuously in Labview, and still have cycles left processor above for other duties such as writing to the file .VI and update the screen.

  The reason for which I am aiming for USB and no PCI/PXI is because I am concerned about the interference of the computer that affect my signals.  I read only analog voltages in the range of +-10V.

  Thank you for your understanding.

  You can acquire and store at rates of several orders of magnitude higher than 10 Hz. A good way to make sure you can follow has a producer/consumer architecture so that the file writes are made in a separate loop. Backup to the binary is also much faster than backing up to the text. Thus, the design of the program is important as well as the material you use.

• MW1 enhance its orbit when it is connected to the pc for the transfer mode

  my smart restarts wireless when I connect to the pc and click on transfer mode

  can someone help, I have the latest firmware

  Please let me know if this problem continues after you have installed the latest update for MW1. You can update to 0.1.C.0.3, using SUS.

  http://www.sonymobile.com/GB/tools/update-service/

• Call the menu Handler for a transfer out to external number

  I'm completely hide on that's why I can't understand this configuration... It's pretty simple:

  The appellant takes the phone and he made a call to the Unit Manager... The message says to the press '1' to be transferred to the technical support.

  I can do this with extension 4-digit fine to a transfer of Subscriber.

  But my '1' in this example must be the transfer of a number of external... How is this work?

  Thank you!

  You map either the 1 button for "attempt to transfer for" a call handler configuration to dial the external number (i.e. "9,1234567" in the chain of transfer) - or you can have 1 go to the conversation of "transfer system" which allows users to "free dial" the transfer number themselves (if he spends gathering with the restriction for this table). This assumes you're on a newer version 4.x of the unit.

  the former resembles what you want...

• HARD disk for maximum support PowerEdge 2950

  Greetings,

  I have server PowerEdge 2950 with Six internal hard drive bays. How many maximum capacity of hard drive taken in charge in one Bay?

  Thanks for the reply and best regards.

  If you use a PERC 5/6, 2 TB is the maximum size of physical disks - this is a hardware limitation, and there is no way to use anything larger than 2 TB.

  If you use a SAS 5/6 in RAID mode, 2 TB is the maximum - it is a limitation of its limitation of RAID. I would never do that, but some said that grows to 2 TB will work on the SAS 5/6 in NON RAID (left unconfigured) mode.