Wireless connection P20 for PDA
Just bought a P20 & am tearing my hair out trying to connect my Axim PDA. Is not not a geek, I turned on the WiFi on the PDA and the PDA but not 'See' each other.
WiFi says Control Panel works fine
Does anyone know a good step by step guide that Toshiba/Windows Help is not help.
Thank you
Warren
Hi Warren
You already did link between P20 and PDAS using the cable? Before trying to make any kind of connection you have to the synchronization between the two units using cable. If this works correctly after that you can try to make a wireless connection.
Tags: Toshiba
Similar Questions
-
Lost my wireless connection yesterday for some reason any.
Lost my wireless connection yesterday for some reason any. I could add my router for my devices, but it keeps telling me that my computer has the wireless cut and I need to reactivate it. I can't find the place where on my computer to do. Frustrated...
It can refer to the key combination in the notebooks to turn wireless switch
Convenience store shows me "Turning on the wireless capability" when I disable wireless with the combination of keys and run the troubleshooter -
Re: Satellite S70T-A-016 - no option for wireless connection
Greetings,
Just picked up one new Satellite S70T-A-016. Everything worked very well last night and I had a wireless connectivity, but now, I have no option for a wireless connection. I pressed the button F 12, and the only message I get is ' airplane Mode on / off. I don't know if I pushed inadvertently something I shouldn't or not. Have connected by cable to Toshiba and updated the atheron wireless LAN and realtek drivers but still nothing. Troubleshooting only tells me to plug an Ethernet cable.
Starting at this, so any help step by step would be appreciated. Thanks in advance
Post edited by: jakobsprenger
Usually, if you turn off the airplane mode WIFI should work.
Check please follow option: move the mouse to the lower right corner and when you see options on the right, click settings. You will see the option for the WLAN. Click it and you will see the options networks. Make sure that airplane mode is DISABLED and Wi - Fi mode.You don't need to reinstall drivers. Laptop is preinstalled with all the necessary things and the reason for not working WLAN are bad options I think.
Please check it out and provide feedback.
-
I think I accidentally uninstalled my drivers for my wireless card in an attempt to "clean" my PC of the programs that I use is no longer without realizing that it was a crucial driver I needed for my wireless connection.
Where could I go to find the drivers to download and also how would approach I re - install the necessary drivers for my wireless connection?
Thank you.
-
My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why. The deskjet printer shows that there is a wireless connection.
Hi Mpsfeldt,
Thank you for using communities Support from Apple!
Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.
To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.
Best!
-
Hello
I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?
Thank you
Mouda.
You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC
-
Photosmart HP 5510 series: printer for wireless connection software installation CD
Hi all
I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!
Hello
Thank you for using the HP forum.
You can download and install the software COMPLETE features of HP printing for your operating system:
Please select your printer and win 10 OS before you download and install the FULL features software.
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
Hope that helps.
-
How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect)? I guess I have to be able to drop on my Google Cloud someway.
Thanks, I'll do the application of inkjet Canon a try.
-
Hello world. I, m Bengt from Sweden. Unable to connect wireless epson printer for my aspire m1. I tried the drivers of each possible site, epson, windowsupdate and more with no success. Can you help me?
Great! There is a material error in the printer! I'm going to usb it for now. Perhaps by a new printer, later! Best regards
Bengt
Thanks for a good and fast support! -
but wireless connection can't get all web pages for display on any browser
connected to a wireless connection but can't get all web pages for display on any browsersit is connected with good strengh but does not connect
Hello
What happens when you connect to the router via a wired connection?
Method 1: Reset the Internet (TCP/IP) Protocol:
One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you are unable to connect to the Internet, TCP/IP can be causing it.
TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility. Reference:
Reference:
How to reset the Internet (TCP/IP) Protocol:
http://support.Microsoft.com/kb/299357
Method 2: Reset the default Hosts file
The "hosts" file is an important Windows system file which maps hostnames to IP addresses. Its a simple text file that is stored in the folder "%windir%\System32\drivers\etc\" in Windows NT, 2000, XP, Server 2003, Vista, Server 2008 and Windows 7 32-bit editions. In the 64-bit editions, it can be also stored in the folder "%windir%\SysWOW64\drivers\etc\".
Structure of the hosts file is very simple. It contains lines of text containing the IP address, followed by the host name.
Sometimes this hosts file is hijacked by viruses, adware, spyware or Trojan software and is changed to redirect your browser to various websites containing malicious code. It could also block security Web sites and the Windows Update Web site in your system so that you can not install virus definitions and security updates in your operating system.
Reference:
How can I reset the default Hosts file?
-
Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility
My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?Hello
This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.
-
I can't get my internet to open using my wireless connection, what should I check for?
I can't get my internet to open using my wireless connection, what should I check for?
Hi RosaSchiroo,
1. are you able to access internet via wired connection?
2. have you done any hardware changes or software on your computer before this problem?
3. you receive an error message or code?
You can follow this link and check if the problem persists.
In the Windows wireless network connection problems
Hope the helps of information.
Please post back and we do know. -
I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection. The printer is connected to a Dell XPS running Windows 7. Is there a way to do this?
Hello
Printers use a built-in wireless card and plug it into a power source, not your network or computer. After turning on the printer, you must refer to the documentation that came with the printer to set up a wireless connection for each computer.
I suggest you to download and install drivers from the link below
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182
Please use the links below.
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
Install a printer on a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network
Share a printer
-
Cable connection part for good - once I started using the wireless NETWORK card!
Hello
I went although all people in support on this issue, but now I have no other choice than to ask all you people here!
That is the problem. I have two computers with multiple network cards. One is a laptop computer with wireless Draft-N support and 10/100/1000 NIC onboard. The other is a desktop computer with an ASUS Wifi b/g edge and also dual GigE ports nVidia graphics card.
Whenever I try to use network wired for internet or local network even cards use, it died on me. It is impossible to obtain an IP address from the router to use and is unable to communicate with anyone at all. Not even with my local network or even directly to the router (192.168.1.1). If I turn on the wireless card, it connects and everything is groovy (except that I lost my GigE connection to my local network, which is most important!).
I havegone through the standard fare of cyclic power to the router and cable modem, reboot of my machines, etc. all the normal things, we are required to do.
After some hassles with the support of Linksys to get them to send me a new WRT330N, I finally received a new WRT310N and it shows exactly the same problem! Wireless connections work fine, but as soon as I disable the WiFi and wired go, Windows XP gives me nothing else than a message "limited or no connectivity" and let me out of the network.
This leads me to think it's some sort of network problem due to multiple MACs on the same host name. Does anyone know how to get around this problem?
Thank you!
Disable the firewall on the computer and then also try to connect the computer to the modem and check if the computer is able to connect.
-
original title: connect 2 pc set and used for wifi
Yes iam trying to conect my desktop pc to my laptop which gets very good WiFi and use it as a host you for my office and use the laptop computer wifi also to desktop PC is possible
Configure your router to allow the Office to have a wireless connection. And make sure your desktop has wireless capabilities.
Maybe you are looking for
-
Firefox does not delete browsing history in the address bar
No matter what you with Firefox in clearing the browser history by going to the history-> delete history, recent and all delete or reset FF by accessing information from troubleshooting, Firefox does not browsing history. The Web site you have travel
-
input analog trigger on the door of the meter to measure the frequency of generation
Hello I want to measure a frequency on the analog input, but it doesn't seem to work. I'm trying to work with DAQmx with the use of the ansi c standard. The first step, I've done was acquiring information on the analog input. With the use of a simula
-
Error Windows Update 8007371 B install KB2665364, KB2679255, KB2647518.
Greetings, Windows Update cannot install updates that I have listed below. I tried setting the tool to update and ran an Advanced System Care 5 to clean things up, but so far nothing works. Please advise on what to do next. Thank you. Nancy Update se
-
I live in England but would like 3 x HP Laserjet Pro M451 printers 110v version for a project on an industrial site. Where can I buy these in the United Kingdom. If I can can can I buy them anywhere in Europe?
-
HP Laserjet 8600 more, Windows XP, I don't see an option, but is there a way to change the order in which faxes print? Now he's back toward the front. We can print before backward but not for incoming faxes.