Wireless doesn't even show. Help

I have a dell inspiron with Vista on it. I want to sell it but it's a little difficult to sell a computer that not to connect without a wireless connection.

Ive tried several ways to get the wireless to recognize my router but so far nothing worked... and in network connections, what is dsl and broadband services. I don't not even a wireless option. My router does not have a USB and my new computer does not have windows xp or vista. so I couldn't fix it. I made sure that the side had a sliding bar and slid toward the arrows that show a tower next to him.

My wireless card is bad? Can I fix it myself without dumping in money?

Try 1, updated the software of the chipset MB, it controls USB, network, video, etc., once done, edit add.

Remove Programs windows, gray boxes indicate the software is available, but needs to be approved.

Also, the router should have a download install, go to his web site for her. Once installed, you have the

data access numbers, for the operating system set up his way to him, again, the router mfg web would have. Last,.

modify the Firewall tab (with exceptions), you may need to activate some software...

Tags: Windows

Similar Questions

  • I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

    I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

    Hello

    You can try a system restore...

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    .. .choose time, until this problem (you may tick to show more older restore points).

    Tricky

  • No wireless networks detected even they are available and wifi is turned on

    Hi all

    I can't see the wireless networks available even they are available, and always I see red x mark on wirelss icon beside the clock.

    laptop: HP ProBook s 4540

    OS: windows 7 Ultimate

    WiFi adapter: Ralink RT3290 802.11bgn Wi - Fi adapter

    I installed the latest update by connecting computer laptop eithernet cable and search launch legacy manager, alwas says:

    "the best driver for your device software is up-to-date.

    Please any idea of help.

    Thanks in advance.

    Thank you very much for your quick response, actually this problem is solved by changing the country / region of the Device Manager wifi adapter, I tried more region until I had access to available networks.

    Thanks again

  • I want to change my MacBook, but I can not connect at all to my account. It won't even show the mask connection on page of adobes, safari keeps trying but fails.

    I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.

    Hi Rahel,

    Please see Creative Coud connection errors

    Hope that helps!

    Kind regards

    Sheena

  • Ip5 ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick

    Ip5 U.S. spec in Malaysia ios 9.3.5 line 4g doesn't have show just 3 g setting on hp 4g already tick

    This indicates that you purchased an incompatible version of your region. See below for the correct templates

    https://www.Apple.com/iPhone/LTE/#iPhone-5C-iPhone-5s

  • Huawei E160 DONGLE... DOING NOTHING NOT WORKIN AT ALL... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ???

    DONGLE NOT WORKIN ANY, DOING NOTHING... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ??? Download the updated softwear 4it sum... This does not work... keeps saying CANT FIND PC DATE Cardinal... an other updates--don't do anything... what no gud...

    http://support.Huawei.com/support/ForumCenterIndex.do?colID=ROOTENWEB | CO0000000175

    Contact their support at the link above.

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

    Windows Vista Compatibility Center

    First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

    See you soon.

    Mick Murphy - Microsoft partner

  • I have recently reinstalled Windows 7 and now I have no option for wireless connection and wireless adapter is not (wireless connections do not show up when I go to set the new connection)

    I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.

    So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.

    Thanks and + karma to one who can help me solve this problem.

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

    I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

    Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

    http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

    .. .also than that...

    http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

    Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

    See also this about WPA2 on the MN-700...

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

  • After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

    After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

    See this thread on the official Adobe feedback site: Lightroom CC 2015: objective metadata missing when importing field. Community customer Photoshop family

  • Wireless network tray icon shows yellow stars even if its wireless network.

    Hello

    The network icon used to display the star yello when wirless networks were available but not connected to wireless.

    These last days, it shows the yellow star even if the network is connected and the ToolTip, see connectivity.

    Hello

    You use Windows Wireless Management or another Manager?

    No matter what do not use that one, if there is a second turn it off.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Firefox does not load my yahoo mail, repeat me prohibited cycle and even when I reset my setings proxy, (I have no proxies) that doesn't work no-help!

    When I try to load yahoo, the Web site or my yahoo mail it continues to give me a page Cycle with: Description: could not process your request for the document, because that would create a cycle of HTTP proxy. Please check the URL and your browser proxy settings. I tried going in and reset my proxy preferences and while it shows that he recorded, it has not changed anything and I can't access my email. I really want to get rid of google chrome, but if I can't get mozilla to access my mail I will be forced to keep it just to my email. Help!

    Amber

    If you use a bookmark link, then go to the main Yahoo site and navigate from there to the page by e-mail.

  • Help, please! Pavilion 754n no display will not even show BIOS

    First, it has a 80gig HARD drive, everything worked fine initially, then I changed hard drives and put it in a concert 20, have all two XP on it, I wanted to see who was on the 20, after I plugged it in and pressed the power button there is no response, nothing on the screen. The power button is green, then he went to orange, the fans kicked on and other that that there was no noise, stay like that forever. So I thought (OK something wrong with the hard drive), which is weird, because I know that the HARD drive works (and I have tried since and it does not start on another PC). So I put the original, when I hit the power button is the same thing, it's been like that since, I tried two other HARD drives.

    Is troubleshooting I've done so far, reset the CMOS on the map, unplugged everything on the Board and reconnected it looking for the loose cords and the like, tried different riders on the original drive eventually return to that I started on what he did start from the beginning, tried to take all of the ram on resettlement try each stick in each slot try diff ram total, trying to start between each step, tried another CPU that I know works, I tried to start the original disc 80gig HARD on a Dell bios page, it says (error reading disc press F1 to re - start) I press F1, 5 - 10 times it will not start, something happened to this drive while it was initially on the dell HDD then I put the 20gig in the dell and it starts fine. If I put this concert 20 HP I get the same result as above, so I know it's not a hard drive issue, obviously because even with no DISK in the HP, I should get at least to the page of the bios that I can't.

    So I narrowed down it to the mobo, and my question is has anyone at - he heard a simple commutation of the HARD drives causing a mobo don't not working? Also any ideas on why the disk HARD original stopped working after spending the 20gig and then back? Can anyone think of stuff or procedures to try that I have not already?  Thanks for any help!

    Yes spend hard disk could negatively affect the motherboard if connected to ground or precautions rules were observed. Have you been paying attention to connect you to the case? Any discharge of static electricity on your part to the Board of directors could have killed the jury. I can only suggest you remove the MB and place it on a surface antistatic is to say cardboard and connect only the 20/24 pin and 12v atx power connectors. If the jury does not appear now so it is safe to assume its dead. If it should power up you know now it is shorting out on the connections or the case. Good luck.

  • computer doesn't not have a wireless network adapter installed please help

    product # bt590aa #aba

    HP omni desktop

    Vista Windows

    Please help if possible I was wondering if I can install a kind of wireless adapter

    Hello

    go to your device manager and see you see some devices named "unknows".

    If Yes, then >

    Try a few steps

    go to your device manager > right click on the unknown devices > go to properties > then details tag

    Select from the drop-down called Hardware ID is.

    and search for it on google or any search engine, you will get the right drivers...

    Here's print process filming!

    I hope this helps!

    Your old dosent hard drive means with it. If you can install dirvers of your wifi device so it will work with any OS or any new installed HARD drive.

    I hope that helps!

    * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
    * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

  • Now, all the applications on my Mac air show the same icon and doesn't open, please help!

    I did a quick cleaning on my Mac and now all my applications show the same icon and does not open! TIA :-)

    "quick clean up"...

    It seems that you may have removed some system files, you shouldn't have.

    If your Mac is running v10.7 Lion or later, you can restore OS X using OS X Recovery.

  • G780 wireless doesn't work anymore; the networks are but cannot connect

    I have a G780 bought earlier this year. It came with Windows 8, which I still use. Everything was working fine until today. All of a sudden I can't connect to my wireless network (I have a router that can have a 'network of comments' in addition to normal and I can not connect to one of these). I had been fiddling with the settings last night, but everything was working well. I can connect with other devices, so I know that the networks work.

    Networks appear in the list of available networks, but every time I try and connect it just doesn't work. To make sure that I wasn't just typing the wrong passwords I tried to disable all security on one of the networks (so it was a totally open network without password), and the laptop still unable to connect. I tried to reboot the router wireless, by restarting the computer, update the driver for the wireless card, uninstall the drivers and reinstall them, activation and deactivation of the wireless card, by unchecking the option to disable card wireless to save energy and last computer ditch effort that I even did this "Refresh" of Windows 8 option that uninstalls all programs you install and resets the default options. Which included also to uninstall my antivirus program, so I tried to connect without that too. Nothing has made any difference.

    Edited to add that I also downloaded and ran the diagnostic tool on the Lenovo site for my laptop and the version of Windows for wireless network problems and it did not show anything.

    I'd appreciate really no indication as to what to do next. I'm good enough at the end of my mind with this.

    It's the weirdest thing ever. I decided to give it a try once again just for the heck of it and like magic it works all of a sudden. I can now connect to two networks very well. I have nothing after my last try yesterday evening except put the computer into hibernation... I don't know how it works now, but I appreciate the help! I'll create a restore right now, just in case. Thanks for your replies!

Maybe you are looking for

  • replacement of xml child

    I have trouble replacing child xml inside the XML document (below). In order to change the value of the xml node, do I really need to replace the child or there is a way to change the value of the xml node?

  • Windows Photo Gallery hangs constantly

    Hey guys I hope that someone can help me! My Windows Photo Gallery crashes constantly... I can open it up and then after a few seconds a window opens telling me that "Windows Photo Gallery has stopped working". The same problem happened when you acce

  • Windows 7 activation key works on 32 bit and 64 bit?

    Hello, I bought an Ideapad U350, which came with a preinstalled copy of Windows 7 Home Premium 32-bit. Because I upgraded the RAM to 4 GB, but my 32-bit OS architecture use only 2, 84GB, so I want to install a new copy of Windows 7 Home Premium, but

  • ESXi Trial - what happens then?

    HelloFirst of all, what I am trying to build is a small laboratory at home that I can use to test some Microsoft server products. I already used vmware esxi but mainly used and installed Xen server for the last 4-5 years. I mainly use a NUC Intel and

  • Change default export for the whole of the sequence

    I got burned again.Someone at - there a way to change to 'whole sequence' default export settings regarding theincredibly stupid ' in/out sequence "?When you have a lot say 12 long sequences, you can't miss these stupid little in and out of the point