Wireless fails & can't get wireless connection tab is displayed

Similar Questions

• I don't want to use the new tab Page. Is there a way I can just get my new tab automatically display Google? I'm sure this has been possible before.

  I already uninstalled the add-on NTP. I can't stand it. The question sums up exactly what I'm trying to accomplish.

  What page you want as the new tab page?

  If you want the website http://www.google.com for example then set the pref browser.newtab.url http://www.google.com
  
  The default value for the pref is built on: page newtab with the grid 3 x 3 mosaic.

  You can use change in the context menu or jut double-click the pref to change its value.

• but wireless connection can't get all web pages for display on any browser

  connected to a wireless connection but can't get all web pages for display on any browsersit is connected with good strengh but does not connect

  Hello

  What happens when you connect to the router via a wired connection?

  Method 1: Reset the Internet (TCP/IP) Protocol:

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you are unable to connect to the Internet, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility. Reference:

  Reference:

  How to reset the Internet (TCP/IP) Protocol:

  http://support.Microsoft.com/kb/299357

  Method 2: Reset the default Hosts file

  The "hosts" file is an important Windows system file which maps hostnames to IP addresses. Its a simple text file that is stored in the folder "%windir%\System32\drivers\etc\" in Windows NT, 2000, XP, Server 2003, Vista, Server 2008 and Windows 7 32-bit editions. In the 64-bit editions, it can be also stored in the folder "%windir%\SysWOW64\drivers\etc\".

  Structure of the hosts file is very simple. It contains lines of text containing the IP address, followed by the host name.

  Sometimes this hosts file is hijacked by viruses, adware, spyware or Trojan software and is changed to redirect your browser to various websites containing malicious code. It could also block security Web sites and the Windows Update Web site in your system so that you can not install virus definitions and security updates in your operating system.

  Reference:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• How can I get rid of tabbed browsing? I positively hate him and none of the choices in the tools to get rid of them.

  I was using an older version of FF because newer versions have messed up the private browsing and I had to decide if I wanted to navigation tab. I went to a newer version, because many sites does not work with the older version.

  I went to Tools - tabs and checked what I used to use do not get the navigation tabs. Does not work.

  Please tell me how to get rid of tabbed browsing and how to move back to a private and regular navigation without opening a new tab/window.

  If I can't get rid of tabbed browsing, I guess I'll mess with an older version.

  Digital_Gaia:

  Never heard of a case where you could do... However! I found an add-on rather orderly, that you can use to open a new tab in a private browsing mode.

  • https://addons.Mozilla.org/en-us/Firefox/addon/private-tab/

• How can I get the new tab to open all the way to the right when I use the link open in a new tab?

  How can I get the new tab to open all the way to the right of the tabs old when I use the link open in a new tab?

  Set the pref browser.tabs.insertRelatedAfterCurrent false on the subject: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• How can I get adobe connect to work?

  Can I get microsoft to allow me to post this without that he's trying to read my mind not knowing what I'll tell >?

  I can't get adobe connect at work and microsoft has recently updated and then he went to the pot. Any other suggestions that bring together out of all computers because they do not really work the way they should? I tried to restore but it did not work. I ran all virus programs I can find, but it does not work. Is there a setting in the firewall that will allow him to work? The program is on a computer of the College and when I try to set up a rule to the firewall, it asks as the executable, but I don't have that.

  Hi John,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I suggest you post your query on The TechNet Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Can not get the address book to display the email addresses of the contacts

  I moved BT mail using Thunderbird to access my emails. Everything went OK, until I tried to import my
  contacts. I can't get my address book to display the email addresses of the contacts. I will admit that I do not understand the menu you want to move the two columns from top to bottom after importing the csv file. Please can you explain what I'm doing wrong here. All I want is first name, last name and email showing in the address book. Thank you

  I tried to write a procedure to http://thunderbirdtweaks.blogspot.com.au/2013/03/importing-csv-files.html some time ago here. but the thing is if you change the columns in the CSV file in a spreadsheet, first match that Thunderbird expected (both in name and order), then you don't need to play with this terrible UI that aligns with the name of the field name of the field.

  It is in this dialogue if you have the family name next to the e-mail address of the family name is considered to be the email address.

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• How can I get my connection Wireless upward?

  I have a studio of windows with the touch screen and I just did a reinstall on my OS and erased everything and now I can't get my wireless I have no network available and it tells me to install wlan thing... I didn't do it before.

  go to your pc manufactuers website and find the drivers, you will need to connect an ethernet cable or download drivers and put it on a USB key to install.

• I can not get internet connection on my compaq Presario57! I must be close to my router!

  Me and my brother have a laptop. He can get internet anywhere in the House except me! I have to stay close to our router. Even if I get like 5 inches, I can't have internet connection! Someone help me please? I have a compaq Presario CQ5! This has happened since Christmas!

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  I see that the computer loses internet connection after a certain distance from the router on Windows 7.

  I suggest you to return the items provided to solve the problem with the internet connection.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=rifDdtscE7F

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For your reference:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

• Wireless connected but cannot display Web page

  Hi, I have a HPG7094 laptop with Vista 64 bit installed.

  I tried for days to fix my problem. My wireless connection has stopped working. It says it is connected to my wireless - excellent - but when I try to open the internet I get the error IE cannot open the Web page. I deleted my network and tried to re-login only to get the same error. I did a clean install on my laptop and downloaded the drivers on the HP site, but it's always the same.

  In the lower RH it says 'Unidentified network' (and the name of my network) access: Local only. If I connect the ethernet cable, it works fine and if I connect my mobile dongle orange it works very well.

  I have other laptops and desktop computers and all these connect wirelessly without problem. I have tried to 'fix' the wireless connection and not to renew the period of INQUIRY, still no joy. I connected on the router from my office and changed the channel from "auto" to "6" and "11", but this has no effect.

  Someone at - it ideas, what could cause this problem, any help would be highly appreciated.

  Gail

  Hello

  After a couple of hours last night looking through this forum, I came across a post by Paul Tikkanen, January 21, with a link to another driver for the Atheros wireless. I downloaded and now my wireless works!

  Thank you for all your help and keep up the good work!

  Gail

• How can I get the little tab of Firefox in the upper left corner of my browser window? He disappeared with the last update

  There is a little tab on the upper left corner of my browser window that says Firefox. I used to be able to hit that and have quick access to history, print etc. rather than working from the menu on the left three lines. How can I get that back?
  Thank you

  It has been replaced by the 3 lines on the side button. You can either use that (it's actually faster to access your frequently used objects) or customize Firefox How to make the new look of Firefox as the old Firefox

• How can I get rid two tabs to open when I first open Firefox?

  When I first open Firefox I get my home page in a tab, but also another tab opens. This one is set to Facebook. How can I get rid of the opening automatically second tab?

  You get two pages if you launch a new window using either:

  • CTRL + n
  • button '3-bar' menu > new window

  If Yes:

  Check the settings of your home page to see if you have several home tabs. A vertical bar (|) is used between the addresses. This article shows you where to check them in the Options dialog box: start-up, homepage, tabs and download settings. This article has more background on several tabs home: How to set the home page.

  If not, or if the Options dialog box is correct:

  Add-ons - can display tabs at startup or in a new window. If you check the address of the Facebook page, this is the URL to normal Facebook (https://www.facebook.com/) or to a different address?

  Do you have any extensions related to Facebook? You can view, disable and often remove the extensions on page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• How can I get rid of tabs that won't go away?

  I went to a website to make ongoing training. Now I am unable to get rid of tabs. I chose firefox to quit smoking, but they return time after time.
  How can I get rid of these tabs?

  Try this addon...

  https://addons.Mozilla.org/en-us/Firefox/addon/Hide-tab-bar-with-one-tab/

  This will stop tabs