Wireless integrated wireless active vs

I am looking to buy a Toshiba laptop and I want something with integrated radio, i.e. is not a card that comes out of the part. When I see wireless enabled in the description of the product which is different or the same integrated?

Thanks for your help

Ralph

Hello Ralph

I put t know what you mean exactly under permit but just for the record: many Toshiba laptops are WLAN ready units and internal delivered not with the card, but it can be updated any time. I also know that most new laptops have WLAN on board except some units to budget.

I recommend you to speak with your local retailer of everything before buying the unit. It is best to ask all later learning unit has not everything aboard you need for your work.

If you have questions about a specific model please write again and maybe someone can check very precise specifications for your favorite model.

Good bye

Tags: Toshiba

Similar Questions

  • Printing on a wireless active 8500 Pro from a desktop computer.

    So I'm wondering is, I can print to the printer pro 8500 wireless active even if the only wireless device is my router?  My office is connected to the router via ethernet cable.  The printing process of travel via the cable to the router and then to transmit wirelessly to the printer?   I hope that this issue has not been addressed; as I couldn't find the info at the end of 20 minutes, I decided to post.

    For get all answered in a post here is my situation. I have a desktop computer connected to a router via an ethernet cable, I have desktop computer connected to the printer via the usb port. I just bought a laptop. I want to set up a way to use the printer (8500 pro wireless) with the desktop and laptop, hopefully without having to connect to the laptop via a cable.  I know I have to remove the USB to use either a wired or wireless configuration.

    Thanks in advance.

    I short - YES.

    A router does not care how 'customers' are attached - wired or wireless - all devices can visit each other.

  • OEDQ integration with Active Directory - disable SSL

    Hi mates,

    I just installed OEDQ (latest version) on a Unix machine (deployed on WebLogic Server 10.3.6) but I have a few concerns:

    • SSL communications -> is mandatory? I mean, I tried to expose dndirector via a Server Web Apache OHS admin page. I am able to access the page from admin in raw mode, but every time I try to access a specific feature (dashboard, user management, server configuration, etc.) I am redirected to https://< web-server-hostname >: < wls-server-ssl-port > / dndirector, if this is not what I expect. What's wrong? Moreover, if SSL is required, is there a way to expose the console via apache (avoiding any redirect)?

    • OEDQ with Active Directory -> documentation- OEDQ integration with Active Directory - covers just Single Sign-on configuration (on the two Windows/Unix os). What about a simple configuration pointing to an external ldap? The documentation States the following statement:

    It is also possible to configure OEDQ to work with servers of different directory for authentication of users and the identification of the user. For more information on the alternative configurations, "see"contact us" "

    So, how can I achieve this?

    Pointers?

    Thanks in advance,

    Marco

    Marco

    Here is an example configuration that can be used to integrate with AD.  Create a folder called Security in your Disqualification configuration directory, and save the file in this folder as login.properties.  There are a few supporinting of documentation online this process in aid of the Disqualification.

    Here is the file, I'll add a few notes below:

    realms                        = internal, adgss                           = false
    
    ad.realm                      = EXAMPLE.COMad.auth                       = ldapad.auth.bindmethod            = digest-md5ad.auth.binddn                = search: sAMAccountNamead.ldap.server                = dc.example.comad.ldap.auth                  = simplead.ldap.user                  = [email protected]                    = testad.ldap.profile               = adsldapad.ldap.prof.defaultusergroup = testgroupad.ldap.prof.useprimarygroup  = false
    

    The kingdoms line indicates that the 'internal' (Disqualification internal users such as dnadmin) Kingdom and the Kingdom of AD should be used.  Once you are satisfied with the integration of ads you can remove the internal domain and use AD exclusively.  The domain property sets the name of the field AD - here I used EXAMPLE.COM.

    The server property sets the DNS name of the AD server.  If omitted, it is looked up in the DNS.

    The lines of the user and pw are used to connect to AD Disqualification.

    The defaultusergroup line is the name of a LDAP group that contains all users who will use the Disqualification.  The default value for this is domain users that contains usually much too many users.

    Once it is setup and working, you can go to Setup user Disqualification and see a link to external groups that attach ad with Disqualification groups groups to assign permissions to users.

    I hope this helps.

    Richard

  • Integration of Active Directory (AD)

    Hi all

    Let me know is there any related document on the integration of Active Directory with the AAU.
    If anyone with details of doc, please share with me.

    Kind regards
    Vijay T

    Hey Vijay.
    the guide of security management and access by the user for the content server available on the website of the documentation.

    see you soon,
    Sicard

  • Cannot get wireless active uisng Windows XP

    Hello

    one of my friends has a laptop, it was a gift, but he has a problem and he gave me the laptop to fix.

    The laptop has network driver, but it has no software of Toshiba in it.
    I don't know why he lost his CD and the problem is that I can't activate the network.

    The laptop has a small LED of the wireless card, but it is disabled.
    I tried Fn + F8, but the wireless is still off.
    The driver seems to work very well, but he says no networks detected.

    I know it needs a utility but I can't.
    The computer is running Windows XP.

    No idea how I can get active wireless?
    I know that you need Flash cards, but I can't find something similar for Windows XP.
    I tried a HotKey Utility but there only 2 options and they do not seem to work at all, but they are still irrelevant in any case Wi - Fi.

    You wrote long message but haven't posted info on the laptop you have.
    What model of laptop are you using exactly?

    > I know you need to Flash cards, but I can't find something similar for Windows XP.
    Flash cards are not available for Win XP
    As I remember in many cases the common Modules (software) controlled the FN Windows XP keys

  • Tecra M3 adapter wireless activated after login

    Hello

    Problems with the wireless card with integrated on an M3. Wireless adapter is not enabled until the user is logged on as a result logon script does not run but, if logon using the wired interface and remove the cable everything is OK.

    Any ideas appreciated

    Hello

    This article could apply to your question?
    Check the Cause-part somewhere in the middle...

    http://support.Microsoft.com/kb/873485/en-us

    BR

    Tom

  • Passport for blackBerry wireless active, but not used...

    Hello

    the strange situation is as follows:

    wireless - connected according to wifi for wireless LAN configuration, BBVE also recognizes that this wlan key is connected.

    But: slide down to quicksetup watch activates a Wi - Fi connection, but no wlan SSID name.

    tests of shows: one of the mobile network connection is used by the applications.

    Disabling the closed mobile connection shows under "WiFi" SSID and apps now use the wlan connection.

    later reactivate the mobile networks and the WiFi connection is lost for the apps again...

    sometimes restart fixes this, but then again this question comes backup upward.

    Any suggestions for one more permanent solution (other than reboot until both work)?

    Concerning

    HK

    seems, that I solved it now

    the problem is with a VPN set to automatic connection via the mobile network (only), this forces obviously BB10 to prefer the mobile connection on any wlan connection.

    activation of vpn autoconnect for mobile and Wi - Fi seems to correct this problem.

    Mixture of BB does unfortunately by Wi - Fi when a vpn is active, but that's another story, I guess that...

  • My wireless activation

    I bought a 15-p074tx here in China Chengdu Pavilion because my former lodge is to take a permanent cat NAP.

    The new computer had Winbdows 8 version Chinese so I had to install my Windows 7 Professional.

    Then, I got to come here and reload all the drivers for the hardware, including the NIC driver.

    Still I can't find out how to activate my wireless now. My Device Manager showed 2 network adapters drivers needed when I first started, now there's always a yellow marked with an indicator, but I can't seem to find any information about it (name, model number), so I can't perform an Internet search for the correct driver like that.

    Any ideas out there?

    Thank you.

    You are the very welcome.

    Here are links to the drivers you need...

    Wireless:

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

    You also need this bluetooth driver...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405371&SP...

  • How to make the bluetooth printer or wireless active

    I have a printer hp laserjet m1132. I have a wireless network in my house. How to use this printer through bluetooth or wireless connection. can I use a bluetooth or wireless cart to make this work. Please help me.

    Hello

    Its spaces, it must:

    Connectivity

    HP ePrint ability NO.
    WiFi functionality NO.
    Connectivity, standard Hi-Speed USB 2.0 port
    Connectivity, optional None

    To make this printer wireless, one option is to use a wireless USB print server, something like one of them:

    https://www.Google.com.au/search?q=USB+wireless+print+server&hl=en&TBO=u&rlz=1G1GGLQ_ENAU282&source=Univ&TBM=shop&SA=X&EI=R5vJUOjiEoqZiQfeuIDwBg&SQI=2&ved=0CEoQrQQ&BIW=1920&BiH=976

    My suggestion: buy a new printer, can end up better and not need to have headaches.

    Another option If your caught router supported (can be used) print server USB and in this case, no need to buy the mentioned above device.

    Kind regards.

  • I use a compaq 2002 esystem pc using windows xp home edition Pack 3 and having trouble understanding how to make my pc wireless active

    Sky was issuied me with an installation CD, which says that it cannot find a wireless function on my pc but there is a connection network wizard in my pc but do not know how to set up the connection, I am currently connected to the sky with a wired ethernet connection but would go wireless

    Hello

    Please see the links below.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_connect.mspx?mfr=true

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wireless_networking_overview.mspx?mfr=true

    http://www.sky.com/HelpCentre/broadband/set-up/set-up-wireless/

    http://support.Microsoft.com/kb/870702

  • Integration with Active Directory OraHome92?

    Let me first say that I have absolutely zero knowledge of all Oracle products, I don't know if I'm posting in the right forum, but I'm here, if I need to ask another forum please let me know.

    Question:
    We are Microsoft System administrators. We have a client that is running a very old application to the database on a Windows 2003 server. Currently they use a new database (Oracle, not), but the oracle database must accessible for research in history.

    The application works very well.

    We plan to migrate the domain existing (Active Directory) to a couple of servers R2 2012.

    The 2003 with oracle server is also a domain controller, and we do not want in our field of 2012R2 2003 domain controllers.

    Our question is can demote us this domain controller and Orahome92 will work after the demotion?

    Server 2003 is not the FSMO, the FSMO is a Windows Server 2008.

    In other words, how Orahome92 integrates with Active Directory? Or isn't there any Active Directory integration and may us just demote the server and leave it to run as a member of the domain server?

    Maybe you need more information about oracle, all I can say that the following services are running:

    OracleMTSRecoveryService
    OracleOraHome92TNListener

    OracleServiceORCL

    Oracle installed, but NOT running services:
    OracleOraHome92Agent
    OracleOraHome92ClientCache
    OracleOraHome92HTTPServer

    OracleOraHome92PAgingServer

    OracleOraHome92SNMPPeerEncapsulator

    OracleOraHome92SNMPPeerMasterAgent


    I hope sombody can give treatment of this or point us in the right direction.

    I would not be protected by an export created like this. It is not a full export, is an export of the only pattern and you may need more than that if it is necessary to rebuild the database. In addition, it is not a coherent export which may make it unnecessary. I was running export something like this:

    exp.exe System/[email protected]_w3 complete file=d:\directory\\file.dmp = compliance = y

    You may think it's all pretty awkward. The problem is that it is generally considered bad practice to install Oracle on a domain controller, unless you install as a member of the domain administrators group. I guess just like you do not have that, you can be able to downgrade the machine without affecting the database. But I don't really know, Windows security is a mystery to me.

  • ESX - integration with Active Directory: Kerberos?

    Hi all

    We set up the integration of ads for SSH on ESX 3.5 U3 accounts.

    esxcfg-auth - enablead works very well:

    esxcfg-auth - enablead - addomain = our.domain.com - addc = our.domain.com

    For some reason, there was already an additional line in the configuration script: esxcfg-auth - enablekrb5

    esxcfg-auth--enablekrb5--krb5realm=our.domain.com--krb5kdc=our.domain.com--krb5adminserver=our.domain.com

    Things go awry as soon as the last command entered.

    When you add a local account with this powershell command, we get this error:

    New-VMHostAccount: 12/05/2009-10:17:11 new-VMHostAccount 52976ebb - 2 d 24

    -f493-9aa3-bca7894ef581 a general error has occurred: passwd: Authenticate

    mishandling symbolic ion

    The local account is created, but the equivalent of Active Directory gets locked out, after several of these events:

    Failed prior authentication

    User name: USER-TEST

    ID: DOMAIN\TEST-USER

    Service name: kadmin/changepw

    Pre-authentication type: 0x0

    Error code: 0 x 19

    Customer's address: 10.10.120.16

    Now, I have two questions for you:

    1 - does anyone how to solve the problem of blocking

    2 East - -enablekrb5 necessary? What gives me extra in addition to enablead-

    Thanks for your help!

    Kind regards

    Harold

    enablekrb5 is not necessary.  The enablead will set up your kerberos configuration to talk to ad.  the krb5 option is used when you use a KDC that does not have active directory.  In addition, when you create an account on the side ESX, it's pretty much an account without password.  At least no password in UNIX file perspective shadow.  Authentication works by checking the files local to the user name (since the announcement does not serve for the Pb of the user, only authentication), then check the password in the local files, which do not have a password, so failure, and continuing to the announcement through kerberos, for a successful verification.  If you try to create an account with a password on the ESX system, then this is the problem.  You don't need to put it, in fact, it must be without password, so without posting, the user can connect to the system via ssh not effectively or console.

    -KjB

    VMware vExpert

  • Integration with Active Directory or SSO OID?

    We seek in our options of single sign-on integration with OBIEE Oracle EBS 11.5.10 on top. Currently we have MS Active Directory and Oracle Internet Directory with our users synchronized upward in both.

    Can anyone recommend which is better for the OBIEE LDAP/SSO integration and provide the pros and cons of each? Thanks in advance

    PTRAN2,

    If you have any OID then use with AD, you also an external table if you want to be able to define groups, CheminPortail etc. Groups and users can currently be imported, ad, only authenticated against it. It works fine but OID should be admin much more straightforward.

    Ed

  • Integration of Active Directory with telepresence - Jabber video

    Hello

    I would like to have a clarification on the integration of commercials with the existing infrastructure of TP.

    We have A VCS - C 8.x, VCS-E 7.2.2 14.3 TMS with TMSPE.

    We need to have our video Jabber users using their accounts and authentication of the user accounts existing on AD. All the other codecs authentication will be local VCS - c.

    Where can I configure the integration of ads?  The TMS only? VCS - C only? or both?

    Any document that clearly explain this configuration?

    Thank you.

    If you want to check the credentials on the control and Jabber clients video to send their requests for authentication to control VCS, where you have the setup of ADS, you must configure the default and traversal zones to check not the credentials on the highway.

    Regarding your comment on authentication to the highway, just to be clear, before the customer can actually create a record on the freeway, do you want to authenticate, meaning the subzone where they will register to check the credentials, if so, ADS a problem here.  As the video Jabber client will always use NTLM to send its credentials when ADS is used, the highway will be presented with the username/password user name field.  As the highway is not connected to the announcement of check these credentials, it will not allow recording.  Authentication of registration requests always happens on the local server, because that's where the record should be.

    Zac in the discussion below, covers this very well and how to get around it when using ADS and video recording Jabber to Hwy.

    Jabber-video-authentication-vcs-what

  • Passwords enable ISE device Administration (ACS) integrating with Active Directory

    I'm working on a standalone application ISE and running into a problem where the password to enable for a device is not shoot properly.  I have the original connection related AD and I policy conditions/results/sets all as they should be working.  My test run is a 2960 S.  I tried to set up ' group aaa authentication enable default Activate ', but the only way I could do a login enabled with which was if the user has configured locally in ISE identity management > identity > users.  Is there something that I missed that tie will enable passwords for a group active directory as I work for the initial logon?

    I see just a mistake with your failure to enable aaa authentication enable. You must specify the Group of Ganymede.

    Right now, I don't have access to my lab with ISE.

    Here's my config for switches used with ACS.

    AAA authentication login GANYMEDE-SRV Group Ganymede + local
    local authentication AAA Console connection
    Group AAA dot1x default authentication RADIUS
    AAA authorization exec GANYMEDE-SRV Group Ganymede + local
    AAA authorization commands 15 GANYMEDE-SRV Group Ganymede + local
    Group AAA authorization network default RADIUS
    AAA accounting exec GANYMEDE-SRV arrhythmic group Ganymede +.
    orders accounting AAA 15 GANYMEDE-SRV arrhythmic group Ganymede +.

    If you give me all out maybe we can understand why your GANYMEDE ISE works do not with the AD. I see no reason except a misconfiguration or another issue.

    Just to go to the mode, you need more aaa authentication command activate by default enable. This activation mode is pushed to the user if he gets the privilege 15. Your problem should be on the profile or politics. With the approval journal, we can see whether or not ISE pushes politics and why?

Maybe you are looking for