Wireless mini PCI Intel 2200 bg work on Satellite 1410 303

After reading this forum, I decided to try the Intel 2200. I was ready to cover the PIN 11 and 13, as mentioned by many, if necessary.

Be a happy surprise, the map works! even without covering the pins. Be sure to connect the cables properly:

White-> HAND
Brown / black-> to THE

The driver on the CD has been installed everything first, using the typical option. Nothing else was installed.

The machine was purchased 3 years ago. Yes, the unit was delivered with the slot at the rear, but empty, with two tiny cables (white/black) inside. However, the switch and the light on the side of the machine do not work.

[Edited by: admin on 22 July 05 18:08]

Hi bobbao

It's very nice to know that the new Intel wireless card works properly. As you can see, that the antenna cable is properly connected should avoid any problems. Some of the 1410 series come with WLAN and the other units are WLAN ready as your.

I wish you much fun with your oldie ;)

Tags: Toshiba

Similar Questions

  • Wireless Mini-PCI card does not work after installing it in socket

    I have laptop satellite A30, it has a plug for a mini PCI card.
    I buy a (chipset intel) and install the driver on the PC.
    The problem that I can not power on the wireless?
    There is a switch for this perpose on the side of the laptop, but when I change nothing happen!
    Also press the Fn with F8 button but nothing is also happening.
    I discuss this issue with other friends, they told me that there must be something in the BIOS and activiate/deactiviate the wireless, but I can't find anything related to map wireless in BIOS?
    For this I need your help
    Concerning

    Hi guys,.

    THX starbucks for the post, but I must correct you:

    As the wireless card in the mini-pci card slot is the only one, there is NO onboard wireless card. So it can't be anything to be disabled except the pci socket.
    And regarding the problem: perhaps the card is not compatible with this machine. I suggest to buy a card based on the atheros chipset because they are known to work VERY well (in fact they work) in almost all brands without bigger problems and they do in computers laptop toshiba.

    If the card was not recognized then another card must be installed-> atheros and not INTEL chipset

    Welcome them

  • Pavilion dv2-1030ea, upgrading to N Wireless - do blacklist photo hp certain wireless mini pci-e cards?

    Hi, I just got a pavilion dv2-1030ea as a gift and I want to upgrade the card wireless to a version N (only comes with B and G compatible card), but on some sites, he pointed out that not all wireless mini pci-e cards do work with computers laptops hp.

    is this always true? If so what cards are supported? also if this is the case how can I remove this restriction? IMHO, I should be able to use my computer as I see fit, not how the manufacturer decides is acceptable.

    Thanks in advance for any info

    Harry

    OK I worked on how to change the bios to allow me to use any network card I like, for all those who would like to do this take a look at this page here >

    http://www.richud.com/HP-Pavilion-104-BIOS-fix/

    and here >

    http://forums.mydigitallife.info/threads/15808-HP-whitelist-BIOS-mod-mostly-worked-out-final-info-needed

    This should put you on the right track

  • Startup gets "Network cable unplugged" on (new) wireless mini-PCI card

    Repost in the previous topic was locked, but has not been resolved. Original post below, please see previous post for more details

    I recently installed a Netgear DG834GT wireless router and now have intermittent problems connecting my Tecra 9100. If the 9100 has been off for awhile (like overnight), when I restart I get always "Network cable unplugged" for the wireless connection. Reboot several times (anything from 3 upwards) I finally get connected to the router and everything then works fine for hours. Even a quick restart at this point (that is, once that the wireless adapter is connected) does not cause a problem, but as soon as I leave the stop of the machine during a time he fails again on restart.

    There are no errors in the event log.

    I am using wireless mini-PCI cards and have already updated to the latest version of the driver.

    Any ideas gratefully received, for now every morning is a 20 to 30 minutes of rebooting frustration trying to get my connection work.

    (Running Win2K professional)

    Hello

    I have the same problem if I stand for laptop and access point at the same time. If the access point is already in use, the connection is established shortly after. First the access point must establish a connection to the modem. Now the wireless connection is not available.

    I guess after the second reboot, the connection between the AP and the modem is already finished and you can use the network wireless successfully.

    Good bye

  • Card wireless Mini PCI for Satellite Pro has 10

    Someone at - it successfully installed the Toshiba PA3300U-1MPC or any other in Satellite Pro A10 (model PSA15E-01PJY) wireless Mini PCI card? This model already has the internal antenna, the switch and the LED
    mounted.

    On the site of Toshiba UK accessories compatibility table indicates that the wireless adapter is compatible with the Satellite Pro A10 series. When I called the helpline (0870 444 89440) Toshiba, we said that this wireless card was not compatible with my laptop and have been unable to provide any internal wireless card that was.

    Thanks for any help

    John Storey

    Hello

    @ drewlfths: I m not 100% sure where the wireless network card is placed on Satellite Pro M10.
    But in my opinion it s under the keyboard. I think the best way is to contact Toshiba service in your country for details.

    By the way: the Satellite Pro M10 supports only the standard Wi - Fi: 802. 11B. In this case I n t think you will be able to use a super G standard.

    In your case, I prefer to use an external solution such as a Wlan USB key.

  • Satellite 1410-303-new CPU does not work

    Hi all
    MI name Fabio, I'm an Italian boy, sorry for my bad English...

    I have a problem with my Toshiba Satellite 1410 303, I buy a new processor (Pentium 4 mobile 2 GHz 512 k 400bus) but it does not work.
    When I turn on my laptop, I hear the system Speaker beep contiunos that never stop until I turn off the system.
    I clear CMOS, and then I spend my BIOS with the latest 1.40 version.

    Do you have a solution?

    Thanks for the help

    Bye!

    Hello

    Have you installed the same CPU than before, or have you installed a different CPU?

    I checked the manual of the Satellite 1410 and he normally equipped with an Intel Celeron CPU processor and in my opinion, it is the reason why it doesn't work.
    Upgrading the CPU is not being official and it seems that the motherboard and BIOS don't support this CPU.
    Check this Toshiba document: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

    Welcome them

  • ? PRO/Wireless mini PCI card will switch

    This question has been posted before, but I have not found a solution

    I have installed a PRO mini-PCI card / Wireless 2915ABG in my A30. It is recognized as a card very well, but I can't turn it on. Not with the switch and or the software.

    Any tips?

    Hi rothirgo,

    As far as I know Satellite A30 series is built with Atheros and Agere wireless card. This means that Toshiba has been test machines with just these two cards and do not support another manufacturer of the WL card for this machine. If you have the Intel card and good driver, it should work too.

    Is in the device, a problem Manager? When your card has been properly installed, go to control panel > network connections. If there is Wireless Network Connection showed that it should be enabled.

    If you do this, you can now search for available networks in the wireless network connection properties.

    Just one last question. You have wireless on / off switch on the left side of your laptop? What Wireless Card on FN + F8 check if there is an answer.

    Please let me know what you have done and are there any error messages.

  • Satellite 5200 903: Mini PCI card does not work

    Hello

    I am a user of one:
    Satellite 5200 903: P4 - M 2.2 / 256 + 256 DDR/60 GB/15 t SXGA + / DVD - R - RW / nV FX 5600/SFP/WIFI ready/XP

    My computer is a Toshiba Wirless lan Mini PCI Card.
    I installed the card a few years ago - everything worked great.
    In early 2006, I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
    I installed all the drivers for the card of W - Lan, of course, the map worked in a good way (no driver incompatibility or other problems).
    But, and this is the reason of this topic here. It is not possible to connect my card to any hot spot. I tried with 2 different access points, but the result is the same. 'No connection Point found '.

    Does anyone have an idea of what to do or where I could look for failure? Is there maybe no special software required (I couldn't remember that I needed in my last installation special driver or software)

    If more information is needed, please let know me.

    (Sorry for the bad English, but it is not my first language.)

    THX for your help

    Hello Christian

    First your English is fine, and I'm sure that every user will understand what you want to describe.
    Back to your problem: the wireless card properly recognized and listed in the Device Manager?
    If so, please be sure that this card is enabled. Just that you should be able to see any wireless network.

    You n t need any special software. WIFI connection can be configured using settings in windows.

  • Satellite A30 - 303 install wireless mini PCI card internal

    Hello
    I am installing a PA3300U (Atheros) mini PCI WiFi internal card and have a basic question that I hope someone will be able to answer. There are two cables, white and black (under the cover of the wireless card on the case) which I suppose are for the internal antenna. The question is where do these attach to on the mini-PCI card (unfortunately I have no instructions for the card mounting)?
    I'll be very grateful for any assistance with this.
    Best regards, Dave.

    Hello

    I don't actually see one of the Atheros cards, but on other brands, there are two connectors that are marked with the HAND and to THE.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    BR

    Tom

  • Wireless LAN card Intel 2200 does not connect

    Hello

    I just bought an Intel Pro/series 2200 b/g.

    I installed the driver, and it detects the wireless network, but does not connect.

    I used the Intel and Toshiba drivers, but to no avail. My old card, the 2100 works fine.

    Can anyone help?

    Best regards

    George

    Hello George

    You cannot use Toshiba or Atheros driver for the Intel wireless adapter. This is known issue and I found an interesting topic about it.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4451

    I put t know what model of phone you are using, but it's obviously Intel and a 2200 wireless card problem.

  • Portege 3500-SP2: WLAN mini PCI card does not work

    Installed XP SP2 on P3500 and now the wireless is not working

    Hello

    As far as I know after installation of SP2 on your device, you need to reinstall Bluetooth stack and bur 3.00.32 WLAN utility should work correctly. Check if the card is properly installed in the Device Manager and activated correctly (FN + F8).

    And please give us more information on this issue. If you write just that card doesn t work the fastest and simplest answer is: your card is broken.

  • Replacement wireless Mini-PCI on PLL10E NB100-12 s

    Greetings from Barcelona!

    My question is, if this would be the replacement rate card Wireless miniPCI possible for Wireless-N. I mean if the motherboard support this type of card.

    The map in question is (in Spanish):

    Link: [http://www.ciudadwireless.com/ubiquiti_networks_ubiquiti_sr71-e_hi-performance_mimo_wireless_mini_express_atheros_ar9 280-p - 2765.html]

    Don't be fooled the image. It has nothing to do with the product.

    The drivers are also not a problem because the last Atheros chipset supports also this. No problem for disassembly, is not the first time that I deleted it. I tried to change the hard drive, and I find the card. My question is if the motherboard this card. I want to confirm before buying anything.

    A hug to everyone.

    EDIT: sorry! I have a Toshiba NB-100-12 s PLL10E

    Hello

    The mother need card WLan miniPCI.
    AFAIK there is no limitation of the motherboard.

    But the Draft N needs 3 son antenna the usual 802.11 A, B or G supports 2-wire antenna WLan. So, in my view, this could be a problem.

    See you soon

  • Equium L20: How to install a wireless Mini-PCI network card

    I just bought a wireless card for my laptop my laptop did not come with any what wireless I got it all, so buttons in it to the wireless do I need anteater, if yes, how can I install it and would it void my warranty

    Post edited by: welard

    Hello

    You write on your laptop. Maybe your laptop isn't ready to install a minPCI wireless network card.
    But if it of possible to install so generally the slot card WLan should be placed at the bottom of the unit or under the keyboard.

    Then there must be the card only into the slot and then connect the two WLan antenna cables. As far as I know to connect the white cable to the hand and Brown to the auxiliary voltage

    Sometimes the Toshiba ASP should install the WLan card because of the validity of the guarantee.

  • Satellite P300-23F-mini-PCI Wireless card Replace?

    Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

    The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

    Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

    Hello

    I think that this should be possible, but you must use Mini-PCI cards.
    The antenna WLan that is placed behind the screen provides two sons; black & white.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    Greetings

  • How can I activate the WiFi mini-PCI satellite 1905-S301 card?

    Greetz! I have installed a network card wireless mini-PCI in option in my Toshiba Satellite 1905-s301 specifications and turned on the power switch. MS Windows XP Home SP2 Pro edition recognized hardware and install its drivers - there is no cross or question mark next to the Atheros AR5001X + Wireless Network Adapter in Device Manager. However the connection of wireless network manager tells me that there is no current wireless network card. When pressing Fn + F8 a window appears saying that there is no build-in wireless LAN.

    What should I do to activate my mini-PCI Wireless LAN card? If possible, send your suggestions to my email, please!

    Hello

    You must activate the WLan switch on the side of the laptop!
    Additional select the WLAN card properties and check under the Advanced tab.
    There should be an option called turn on/off the Radio. You will need to fix on.

    Greetings

Maybe you are looking for