wireless network help

Similar Questions

• Install the Mini PCI wireless network card. Need help!

  Hello
  I have laptop Toshiba 5200-701 which is upgradble of wireless network, so I bought the mini PCI card Philips wireless brand. The reference is PH12127-E/PH11107-E and support 802.11a/b/g network address MAC 00 4F 05 43 88 F4.
  When I inserted the card in the laptop it shows new hardware found and then I downloaded website IBM software since I was told that this card is basically designed for laptop IBM, however, my laptop is unable to install the software and still facing problem... so please could someone help.
  Thank you very much.

  Moral salvation

  Well, in my opinion, you bought a bad wireless card. I don t think that your game can works with your device. Before you buy some hardware components, you need to check the compatibility of these parts. Toshiba service partners always have information about the units on the right. However, I found a wireless card that is compatible with your laptop. It's a PA3212U-1MPC.

  Good bye

• Equium A60 - 157 HELP Card/PCMCIA wireless network!

  Hi all!

  This problem has been frustrating me for at least 2 months.

  OK, I recently bought a Belkin Wireless G Notebook Card (wifi card).
  The first time I installed the wifi card it worked perfectly. I powered
  extinguish your laptop (after I had finished working on it). The next day
  When I turned the laptop on, you guessed it, the wifi card was not
  work. I did not remove the wifi card for the power off/power on stage.

  When I went into Device Manager, a yellow exclamation point was
  above the wifi card. When I looked at the properties of wifi cards, I found the
  following message appears:

  This device cannot find enough free resources that it can use. (Code 12)
  If you want to use this device, you will need to disable one of the other devices on this system.
  Click Troubleshoot to start the troubleshooter for this device.

  I tried unistalling and reinstalling the wifi card. I tried to use the latest Belkin drivers for the wifi card. Sometimes it works, but when I have the power turned off/turned on the laptop it s not go.

  One of the ways I got the card to operate was removing and inserting the card several times
  until he finds resources and finally worked. I put t use this method as, obviously, I might damage the cardbus slot and the card. In the meantime I ve been using a Belkin Wireless G USB network adapter. I had no problems with the USB adapter, but I prefer to use the wifi card. This is because the majority of the wifi card is housed inside the laptop, so it s not easily evicted. The USB adapter is great for wireless networks inside, but too risky for roaming outside.

  I had this problem of 1.70 at 1.8 ° C bios version, and I still have it with revision 1.90. I intend to return m wifi card in the store for an Exchange, but I have a really bad feeling that the same thing will happen with the replacement of the card. I m not convinced that the current wifi card is defective, because it works perfectly when he gets the resources.

  I tried to manually configure resources on the devices, but I have a major problem. Windows seems to be LOCKED in the automatic settings. The automatic settings check box is grayed out completely, it is impossible for me clear the checkbox. I did not take anything in the bios that can help me solve this problem.

  I noticed that there are many devices running off IRQ (interrupt requests) 19, when you view resources by type in Device Manager. These devices are:

  Standard enhanced PCI to USB Host Controller
  USB host controller standard OpenHCD x 2 (two entries)
  Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  Controller CardBus Texas Instrumetns PCI-1410

  When the wireless card works she also runs IRQ 19, but as I said before Windows is locked in the automatic settings and do not manually configure the hardware resources.

  Equium A60-157 is not provided on board, but it has the potential for. WiFi L.e.d. on the front panel, physical location for wifi turn on side panel wireless icon and F8. Someone know if Toshiba offer an upgrade service, or can I install wifi on board myself?

  ANYONE, PLEASE HELP ME WITH THESE QUESTIONS!
  Thanks for your time!

  Hello

  I found this for you:

  Both devices have received a same ports of entry/exit (e/s), the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller does not get a break in the BIOS because of a damaged MPS (Multiprocessor) system table).
  You can use Device Manager to determine where the conflict is and turn off the device in conflict. On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
  Try disabling the features of conflict. It will be interesting to know if the problem will occur again.

  In my opinion, you should contact the Service partner and ask them if the unit is ready for the Wi - Fi module. Sorry, but I'm not sure about that and I don't want to give you a bad information about it.

• HP Pavilion DV3t - upgrade of the wireless NETWORK card gets 105 error - please help

  I wanted to update my wireless NETWORK card, but after turning the power on, error 105 - unsupported network device

  I have the original is the broadcom wifi + bluetooth combo card and I intend to use a card Intel with 802.11ac ability and also has bluetooth onboard. Its also 2 x 2 if original antenna snap right in

  I'm on the latest firmware F15

  Is there a way I can install this other NETWORK card?

  Help is appreciated!

  Bericade.

  Chapter 3.

  http://h10032.www1.HP.com/CTG/manual/c01720761.PDF

  You can use these wireless cards.

  Regulations of the FCC sorry.

  REO

• Can someone help me with this problem of very strange wireless networking? (intermittent connectivity)

  So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.

  Thanks in advance:

  Justeroo

  Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Help! -Lack of software to connect to wireless networks.

  Hi all

  I bought an IBM Thinkpad T42 Type2373 (Made in 2005) WIPED for a young man named Andrew who I am a Mentor for. His family cannot afford it. I installed Windows XP Professional on this topic and went through hundreds of automatic updates from Microsoft. I also installed NIS 2010 and update this AND more still software too.

  Now, knowing he has a Pentium M Processor (1.7 Ghz), I should be able to connect to wireless networks. Right now I am connected to a router Linksys, this is how I'm connected to the internet.

  Obviously, Miss me some software to be able to do. I looked online on the Lenovo site and I saw so much, that I don't know exactly what I need. I know I need an icon to click that search networks wireless in the region, but there is obviously more software I have to install.

  Any help from any of you experts out there would be greatly appreciated! Thank you very much, and Andrew Merci you too!

  Tom

  
  

• Can you help me set up eprint on my HP7310 so my ipad will display on my wireless network?

  Can you help me set up eprint on my HP7310 so my ipad will display on my wireless network?

  According to this document:

  http://support.HP.com/us-en/document/c02814760

  The OfficeJet 7310 is supported using the application Mobile HP's ePrint and ePrint home & Biz app HP. Two of these applications have been replaced by the HP ePrint app, which is available on the Apple App Store.

  This should allow printing from your iPad via a wireless LAN.

• Unable to connect to the wireless network adapter... Help, please!

  Hello
   
  I recently reinstalled Windows Vista on my Dell Studio 1535. I put everything back on and I went to connect to my internet connection, and in the box "Connect to a network", he says "Windows cannot find any network." So I clicked on diagnose why Windows cannot find any network, and he tells me "this computer does not have an installed and configured wireless network card.

  I don't know what to do. I have a cd you put in after having reinstalled Vista for my laptop and it say the PILOTS AND of UTILITIES. When I set and run the cd, it brings up a bunch of stuff I don't know what to do.

  Please I really need help with that. If you need to know any information on the CD or my computer, I will gladly answer.

  Thank you.

  Install the drivers on the CD, or contact Dell as to what you need to install from the CD:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  GOLD:

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Please help wifi does not not ACER aspire 4710g (wireless network card problem)

  Please help me

  C:\Users\ali>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt #.

  2

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Network adapter on Broadcom 802.11 g

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 318775098

  DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-1D-72-1B-B7-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Anchorfree VPN #2 HSS

  Physical address.... : 00-FF-03-C6-CD-54

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card Anchorfree VPN HSS

  Physical address.... : 00-FF-EF-4A-57-34

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  C:\Users\ali >

  AWI

  There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

  I would start by removing the current driver of sifi and install the latest driver available.

  The IP address for the above connection is

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

• Wireless network adapter give messege error HELP ASAP!

  When I try to connect to the network wirelessly around me, it gives me the following message: "the ability of your network adapter does not match the requirments of this network". What should I do I have Windows 7 Enterprise and my network adapter's: D-Link DWL-G510 high speed 2.4 GHz 802.11 g PCI Wireless Network Adapter.What should I do how can I solve the problem please HELP ASAP! Thanks PSI HAD NO PROBLEMS USING the ADAPTER IN WINDOWS XP IT WOULD CONNECT to all THE NETWORKS BUT IN WINDOWS 7 IS THE PROBLEM!

  Have you checked under the adapters advanced properties wireless?

  The network and sharing Center, click on change settings card, right click on wireless network connection and then go to properties. In the Properties window, click on the button set up and pull the top of the Advanced tab.

  You should get options here to set the mode (a, b, g) among others.

  You know the settings of the wireless network you want to join?

• Help: wireless network settings changed on the router but loss of hp install cd for pro8000 wireless

  HP Officejet Pro 8000 A809 Wireless

  Mac OS 10.6 and 10.7

  I changed my router wireless network settings and now I need to change on my printer so it can join the network.

  Problem is that I throw my installation CD and it seems that you need to change the settings?

  I connected via USB and downloaded the driver on the net and reinstalled but don't see an option or a chance to set the printer wifi options.

  I tried to reset the printer settings wifi with three taps of the paper button while now thought wireless button I'd see change options only when usb connected, but I did not.

  It seems weird and archiac you would need the physical disk to make the required changes.

  Any help would be appreciated.

  Hello

  Temporary connect the USB printer to a Mac.

  Applications > Hewlett-Packard > utility device, run the installation wizard.

  Select the printer and then follow the on-screen instructions to configure the wireless connection.

  Please let me know of any questions,

  Shlomi

• HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

  I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

  Hello

  Thanks for posting your question in the Microsoft Community forum.

  Refer to this article and let us know the status.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Thank you.

• Help: XP driver for 3000 G410 wireless network card

  Hi all

  My recently purchased g410 came with Vistra driver (only) CD, while I install Windows XP instead. I downloaded the drivers from the Lenovo Web site and everything worked except the driver winXP for "wireless network adapter" (all 3 of them: Gemtek, 3xxx and 4xxx), the adapter was simply not acknowledged.

  When I look at g410 spec, it says something like "Type of wireless network: InviLink 802.11bg", this means that there is another type of wireless network driver those available on the Lenovo site? ' " If Yes, where can I get this driver? Can someone, please?

  Thank you

  fitro

  Try to use the Gemtek driver comes with vista driver. It is compatible with XP. It worked for me.

• Help us to extend my wireless network!

  Hello world

  After reading a lot of Web pages on this topic and get very confused, I thought that post id here.

  I replaced my old separate modem and router yesterday for a Linksys WAG160N. All in all, im very happy with it

  Basically, my neighbor is pay their ISP a fortune and hardly uses internet at all. Ive offered for them to share mine (both to provide a total consent, im not doing something questionable!) that I have a very large download quota and this would save their money.

  Now the 2 houses are separated by an alley, but the distance between the router and the computer is about 6 m. Strangely, my WAG160N is not carried as far as my wireless network does not appear when they in their House on their laptop!

  So after reading about bridges wireless / wireless Extender range and all sorts of things im now very confused.

  I'm looking for essentially the most cost-effective way to extend the signal of my WAG160N, possibly through a second router in my garage) to allow the neighbor get a good signal. I cannot reposition my router/modem from its current location and also unable to connect a second router by an ethernet cable, do wireless.

  So, is there a way I can connect my WAG160N wireless to another wireless router in order to extend my signal for my neighbor to use?

  I was watching the Netgear WN2000RPT and the WRT160N that someone else had previous success with using it as a Repeater.

  Thanks for reading! I can't wait to hear any suggestions

  Alex

  UPDATE: Connecting 2 routers with a 10 m ethernet cable works. Is it possible to eliminate the use of this cable?

  Alex

• Unable to connect to the wireless network without help

  2 month old laptop dv7-3162 and it has now stopped working in terms of connection to the Internet wireless. The other computers in the House connect correctly (wireless). So I know for a fact that this isn't a thing of router (my router AND the motem is an all in one device). Now, IV ' e updated my drivers for the latest drivers (only the atheros adapter wireless if it matters) and nothing to fixxed the question. He sees wireless networks, that he just does not connect to them. IV ' e reset and power cycled motem/router several times without success. A ran a windows update and several reboots.

  Thanks in advance

  He worked, all you have to do is go in the device management and wireless network card driver, disable, restart, let it reinstall, and it should work. It did in my case.