Wireless settings have been holding back me

Similar Questions

• Hi support team, in something so my mozilla settings have been changed and he baceme transprenet, now how to get back to normal?

  Hi support team, somehow my mozilla settings have been changed and it became transparent, now how to change, return to normal, because everything is transparent, menus, pages etc.

  This could be the same problem other users report as a white or black screen due to an incompatibility between 33 Firefox and some former card/chipset drivers graphic.

  Please disable hardware acceleration as a temporary workaround. Instructions step by step in this thread: https://support.mozilla.org/questions/1025438

  Does it work?

• WARNING: Your DNS settings have been changed. Accept changes or restore the original settings?

  WARNING: Your DNS settings have been changed.  Accept changes or restore the original settings?

  This is the error message that appears every 3 minutes.  If I click on accept and then I can't get back on the internet unless I reboot.  If I accept the restoration, so I'm OK for the other 3 minutes.  Why is that happening and how can I solve the problem?  (The computer has always been setup for obtain an IP and DNS address automatically.  I have checked the properties and that has not changed).

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• In the firewall, under the Advanced tab, have error that says: "the network connection settings have been corrupted. It is the last issue after problems with Windows Security Esstentials

  Essentials security Windows stop working and firewall has been disabled. Security Essentials showed a sirefe virus, I think. I was finally able to remove and reinstall security essentials and turn on the firewall. However, I have now several problems.

  Windows Update does not seem to work. It is said it is download and install the update, but the window keeps popping up saying I need to install the updates, and it's the same updates that have been installed just.

  Cannot run updates on financial software or other programs.

  Cannot run an automatic Microsoft patches to resolve firewall issues.

  Running Windows XP Media Center Edition, 2002, Service Pack 3

  A registry cleaner or any third party Cleanup utility was run on your system?

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare 5; Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. CCleaner,)?

  Moreover, these registry cleaner programs are snake oil.

  They don't help and can cause problems, so try to avoid them.

  When you open the firewall applet Windows (firewall.cpl) and click on the Advanced tab, the following error message may appear:

  Network connection settings have been corrupted. To resolve this problem, click default settings. This will remove all your Windows Firewall settings, and this might cause some programs to stop working.

  

  Resolution

  • Click Start, run. Type services.msc and press {ENTER}
  • Double-click Windows Management Instrumentation
  • Set the startup type to Automatic
  • Click Start to start the service.

  Then run these commands to start, run dialog box:

  WinMgmt/regserver
  regsvr32 "% Windir%\system32\netshell.dll".
  regsvr32 "% Windir%\System32\hnetcfg.dll".
  regsvr32 "% Windir%\system32\wbem\wbemprox.dll".
  regsvr32 "% Windir%\system32\wbem\wbemsvc.dll".
  regsvr32 "% Windir%\system32\wbem\wbemcore.dll".
  regsvr32 "% Windir%\system32\wbem\fastprox.dll".

  UTC/GMT is 18:39 Wednesday, June 20, 2012

• Found previously read Emails that have been deleted, back in my 'Inbox' and not marked read.

  Original title: Windows Live Mail 2011

  I found already read the Emails that have been deleted, back in my 'box' and marked unread.

  Also the subdirectories, I created my "inbox" which contained Emails for retention, disappeared.

  I was informed by Microsoft that Windows Live Mail is no longer supported by Microsoft.

  Can anyone help?

  Try asking in the Forum Windows Live Mail:
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=threads

• Your DNS settings have been changed. Accept changes or restore the original settings?

  After you have installed Spyhunter, I get this message every time I start up. If I don't "accept", I lose the internet connection. Is this just a nuisance, or some malicious software work?

  Hello

  Please refer to the suggestions of Vidyaranjan A V responded on 18 January 2012

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/your-DNS-settings-have-been-modifed-accept-changes/378654ca-f754-4425-b1af-152213df710d

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you still have questions, I would have you uninstall Spyhunter and check if the problem persists.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-CA/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• When my PC comes out of hibernation I get a message that "settings have been automatically changed to cause low-memory for operation Aero"

  * - Original title - Win7 settings

  This is related to other issues on Win7 Aero performance. I have a Core i5 processor 2310 2.9 GHz CPU and a videocard from ATI (AMD) Radeon HD 6570 (I don't know the exact specifications but minimum memory for this model is 512 MB). Well, this should be enough to use Aero. However, when my PC comes out of hibernation, I get a message that the settings have been automatically changed because of not enough memory for operation Aero. Why is it so?

  Hello

  1. have you made changes on the computer recently?

  2. is specific to hibernation question?

  3. What is the accurate and complete error message?

  Method 1.

  Open the Aero Troubleshooter: http://windows.microsoft.com/en-IN/windows7/open-the-aero-troubleshooter

  Guided Help: Troubleshooting Aero in Windows 7: http://support.microsoft.com/kb/976170

  Method 2.

  You can try to change the power settings and check if that helps.

  Power management: http://windows.microsoft.com/en-us/windows7/products/features/power-management

  Method 3.

  You can also update the display drivers and check.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-hk/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

  I hope this helps.

• Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my drive C:, the exported image n

  Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my C: drive, the exported image is no longer automatically appears in my Picasa files as it has for years. How can I fix this please?

  Hello

  Greetings!

  In the export dialog box change the export after option.

  

  Concerning

  Jitendra

• From the start, the display settings have been changed

  I woke up this morning my computer starts before a pretty bad storm. I fear something my have been struck by lightning, but I do not know? When I booted up... Windows appeared to be normal... but all my icons are huge, with all the rest... seems to work very well with the internet, etc. I have change the size in pixels and it seemed to normal size, but somethings just not good. It almost seems as if I'm in safe mode, but I'm not. As the fonts are different... I do not know.. does anyone know what I need to do?

  * original title - need help *.

  It could be that your video driver has been reset to some VGA default, rather than the specific card in your system. Check the properties of the display to see if it is correct for your telephone. (Right click on the desktop, properties, settings). You should see the screen and display adapter listed.

  Unlikely, but you can also visit Accessiblility (display) settings in the control panel to make sure that none of those who have been changed.

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner

• Have a popup that says that Brower settings have been changed. No responcse at all the choices.close and he doesn't come back.

  Can only close by rt click on firefox in the task bar.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• My settings have been changed I want to return original settings please

  I need help to get my original settings back my pc is windows vista

  Obtaining recovery Vista Media or use the computer for well Vista recovery Partition it back to factory settings...

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't allow an application through firewall - and security settings have been changed, but not by me!

  I can't download anything Mozilla Firefox - Finally I worked on that I need to change the settings of the firewall, and when I went in firewall, I found that all downloads of Mozilla entrants are blocked on the firewall. This was not the case yesterday and I'm not sure what the computer has done to cause this. I tried to click on the button for me to allow through the firewall, but it doesn't work - and I am the administrator and the only user of this computer. I can not get internet explore or google chrome to work so I'm stuck. I tried troubleshooting but nothing that requires an application to download does not work. It comes back with an error telling me my internet security settings do not allow me to download - but then it only allows me to change the security settings. Need help please, I really need my computer!

  Hello

  Thanks for posting your concern here at Microsoft Community.

  If you have changed some Windows Firewall settings and you want to cancel your changes, you can restore the firewall settings to the original (default) settings.

  1. Open Windows Firewall by pressing the Windows key + X , and then clicking Control Panel. In the search box, type firewall, and then click Windows Firewall.
  2. In the left pane, click restore defaults. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. In the dialog box that appears, click restore defaults. At the confirmation prompt, click Yes.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

  If the problem persists, I suggest you to create another user account and check.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows-8/create-user-account

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• All images are links (red x) but only on the user account of my husband on Windows Vista Edition Home Premium. The settings have been adjusted. Windows has been updated.

  My operating system is Vista Home Premium. We have two user accounts: mine (Administrator) and my husband.  On his account, all his images links are broken.  Images with assistance, the Explorer, Google (weather, calendar) desktop tools.  I did basic with verification troubleshooting settings, and the launch of Windows Update.  What is different on his user account?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. what browser you use on the computer?

  Method 1:

  If you use Internet Explorer and you should disable or hide pictures, then I suggest you to follow the following steps:

  a. open Internet Explorer.

  b. click on Tools.

  c. click on Internet Options.

  d. on the Advanced tab, check the option show the pictures.

  e. click apply and OK.

  f. restart Internet Explorer.

  Note: If the option to show images is disabled, you will not be able to see the photos using Windows and also supports.

  Reference:

  Images are not displayed on Web sites in Internet Explorer

  http://support.Microsoft.com/kb/283807

  Method 2:

  I suggest to optimize Internet Explorer and check to see if it helps.

  http://support.Microsoft.com/kb/936213/ro

  Note: Please note that reset settings Internet Explorer (IE) will reset all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Method 3:

  I suggest to create a new user account and check if the problem persists.

  Create a user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the new user profile resolves the problem, you can screw the corrupted profile and re - install the applications and programs.

  Reference:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if it helps.

• Carshes Firefox at startup and no settings have been changed. Latest version of FF. I just restarted the computer from the windows updates.

  After reboot and installation of updates of windows etc. FF suddenly crashes. No idea why. I deleted all the profiles completely, unintsalled ran ccleaner and reinstalled. nothing. Any ideas? I do not think that windows effect FF FF updates opens not even in safe mode and d rest not doing all I can do is restart and shut down.

  Thank you I appreciate someone who can help you. I have class anti malware and my pc is clean. Windows 7 64-bit. I use Webroot and who is temporarily disabled because I'm trying to solve this problem.

  We are sorry to hear that your Firefox seems to crash when you open it. Please perform the following steps to give us an ID of crash report which helps us to learn more about the cause of the accident.

  1. To get a window run the following shortcut: [Windows] + [R]. This should bring up a window that contains a text field.
  2. In this text field, enter %APPDATA%\microsoft\windows\sendto and press ENTER. Should open an Explorer window.
  3. From the Solution Explorer window, double-click on the Mozilla folder, then double-click on Firefox , then Crash reports. Double-click subject.
  4. Now you should see a list of files that contain reports. Go to view > rearrange icons by > change to get the latest files at the top of the window.
  5. Open the 5 latest files with a text editor and copy them ID.
  6. Paste each ID with bp - in the window of response on the forums.

  Thanks in advance!

  You can find more information and troubleshooting in the article Firefox plant - troubleshoot and prevent assistance fixing crashes .