Virgin Media Superhub

Similar Questions

• C4580 connection with Virgin Media Superhub - how to do it please?

  I'm on a mac. The printer was fine until the Virgin gave me a superhub. I've been on a netgear router before. Now it says the printer is offline.

  Oh, you are using the CD that came with the printer?  Don't do this - it is old.

  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• F4580, printer: unable to connect F4580 to wireless network after the upgrade of Virgin Media nowhub

  My printer HP F4580 was connected to my network without wire from Virgin Media Superhub. Then I upgraded to the latest Supehub2 of VM (150 MB/s) but the printer does not now connect. We have 2 Macbooks that connect ok for the SSID of 5 Ghz and a cell phone that connects ok for the SSID of 2.4 Ghz. The printer is WPS enabled and therefore the network. I tried to add the printer to the network using the two WPS push and entering the PIN for Client in the VM Supehub Wireless Manager, but neither work. When I get the F4580 to print the wireless network test report prints a WPS PIN and details for the VM in 2.4 GHz network (auth WPS - PSK, AES/TKIP encryption) sees it. The report includes the SSID for my previous network in the configuration summary. I don't seem to have another way to connect elsewhere WPS push or PIN customer WPS.

  In Manager machine virtual Supehub mode wireless 2.4 GHz network is defined as up to 144 Mbs, but it makes no difference if I put it up to 54 Mbit / s. The Security Mode is set to Auto WP, it makes no difference if I put it to WPA2-PSK (AES).  WPS is activated, and push the WPS button on the Supehub flashes when I use WP Push or enter the PIN code of the customer. In both cases, the I pressed the F4580 wireless button so that the indicator wirelss light flashes then than the VM, push the button flashes. Can anyone help?

  I solved the problem of (re-) install the printer on a Windows PC on the same network, using the CD for the printer. The installation allowed me to select the network, and set up the printer for wireless use.

• Can I use Virgin Media email and gandi mail net on same Thunderbird set up?

  Having problem for Thunderbird at the second address Virgin Media email see (new) and webmail not much better. If I create a Gandi net account will both my V Media address 1 and new address Gandi be available the same Thunderbird set up?

  Regards, Phil

  I fear for you that if webmail of problems, normal email might be not the best (and could do a lot worse!) You have a particularly slow or intermittent connection?

  This isn't a bad price and it's a little less to pay for my. org.uk domain and its accounts. But then my provider is in the United Kingdom and I am in terms of name with exceptionally competent technicians they employ.

• How can ensure me that Safe Search of Virgin Media is enabled in the settings of Firefox

  My service provider to wide band in Virgin Media. They have Safe Search, which blocks all pornography, hate, Crime, Violence and self-harm and suicide websites, but it does not work when searching in Google. They say I should make sure 'Safe Search is enabled in the settings of your browser search engine' I can not find how do.

  Thank you very much

  Barry Hughes

  IMO, if it's a feature offered by your ISP - Virgin Media - I think that the controls for which would be available on a page of Virgin Media website. Or there should be some type of addon.

  -What are you talking about? Safe Web
  http://my.virginmedia.com/my-apps/websafe.html

• How can I change the settings of cookie/javascript since the last update of mozilla tools icon has disappeared and I can't access my email from Virgin Media account

  I tried to connect it to my Virgin Media email account and get the message on the activation of cookies and javascript. When I followed all of the options (which are set out in all your help pages) I can not connect on my email account. Other Web sites that use user names and passwords seems to be affected. The only problem I see is the site of Virgin Media. How can I access my email account now.

  To change the setting of cookie

  Go to the Firefox Panel its on the far right last button.
  Go to options and then go to privacy
  and make sure that it says Firefox will: remember the story

  If it still does not work, I would recommend reset firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Virgin Media hub great connection

  Hi all, just to upgrade to a new super hub Virgin Media-150 200mbs - everything works fine.

  However, my Airport Express (used for streaming music) refuses to connect.

  EI appears in Airport utility, but when you try to connect by using the SSID name of the network and the router password - he wrote himself in the AE OK but then disappears and cannot be located by the Airport utility longer?  You must reset the AE and start over, but still does not recognize the SSID or password?

  I used the AE for many years on my old router VM without any problems, but it is causing a lot of frustration!

  That I am, I am doing wrong or else is AE compatiable with the new plate rotating super VM?

  Any advice would be appreciated.

  Thank you all...

  Plug it into the computer and do the installation via ethernet.

  Wireless configuration by wireless looks like sawing off the branch to that which you are sitting.

  The original express N is very old, but if she worked on the old router it should work on the new... but you need to give me more details.

  For example the new router for VM... It is dual band? Could you try to configure the Express to join the wrong group.

  A lot of problems when you try to match wireless of different brands.

• Nighthawk R8000 to Virgin Media Super Hub 2 connection problem.

  My R8000 does not connect to the hub super Virgin Media 1.0 Gbps. I have a line across the R8000 and 150 meg, I get only 96 Mbps.

  My LAN is defined as follows:

  Speed = 1.0 Gbps.

  I made the default settings and that it has not cured the problem.

  If I connect the VM 2 super hub directly to my PC I get 158,2 Mbps when the speed of local area periphery is 1.0 Gbps

  I'm on Windows 10

  When it is connected to the VM via Wifi hub, I get 157 Mbit/s on the % line GHz.

  Any suggestions on how to get this sort would be very usfulll

  OK I'll look into that. Thanks again.

• Loss of connectivity with my Virgin Media's broadband package.

  I have a Virgin Media's broadband package

  Hi Maxine Brydges,

  I suggest you follow the steps in the article mentioned below and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

  Let us know if that helps.

• The security services do not start after upgrading to Virgin media - Windows XP

  I just installed an update for Virgin Media security - now I get a message that an error has occurred and to restart the Security Services - How to do that as it is does not start automatically at startup?

  See the answer of rhabdomantist in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/help-and-support-service-not-working-in-xp/5acbd8c6-dd69-e011-8dfc-68b599b31bf5

  And/or

  Contact technical support at Virgin Media: http://shop.virginmedia.com/broadband/help-and-support.html

• Cannot connect to Virgin Media Home Hub with Atheros AR5007EG wireless adapter

  My brothers computer has problems to our Virgin Media Home Hub wireless conecting. I contacted Virgin Media Services customer and they say that the driver is the worng version. The computer has a driver adapter G series and we need a driver to adapter N series. What is the difference between the two, and where I could get the adapter driver series N of for the Atheros AR5007EG Wireless Adapter?

  I hope someone can help

  Hi Williams,

  Thanks for posting to the community by contacting Microsoft.

  The drivers are developed by the hardware manufacturer. I suggest you to contact the manufacturer for more information about the driver and support:

  https://support.Atheros.com/

  Let us know if it helps.

• Unable to connect to the network using the super pole, Virgin media

  Original title: Wireless Connection, it connects, but you cannot use the internet laptop, acer 7520on

  Hi tried to connect portable to new super Virgin Media hub he connected but could not get on the internet all I tried sometimes hidden I have a laptop on the same system is not a problem I do following Phil

  Hello

  Do you have an error message when you try to connect?

  Perform the steps in the link and check.

  The Super hub troubleshooting blank media

  Hope this information helps.

• Very slow use of Virgin Media, scanning operation

  I have a HP with Windows 7 Professional and Virgin Media cable Office XT249EA to my ISP.  I had this computer for about three months.  I also use Virgin Media for my safety.  I recently decided to scan myself and found the remarkably slow scanning process.  I have now tried several times to complete an analysis but have failed to do so after a few hours.  It seems to me that the search starts off works well, but when the computer enters an idle period of no screen analysis seems to stop.  When I then open it up to the search starts again (or so it seems).

  All help to overcome this obstacle would be much appreciated.  I don't know if I can / should I delay the computer somehow, enter a phase of idling.  Otherwise I can I do or something that interferes with the scan is running.  Giving me advice I know you I'm not in my first burst of youth (!) and may not appreciate the finer technical points.

  Thank you very much

  Roger White

  RW100, welcome to the forum.

  According to me, it is a problem best solved by Virgin Media, Customer Service.  I don't think it's a hardware problem.  However, you might try setting different Power Options: Control Panel / Power Options.  Maybe it's that the system detects the analysis that the computer is idle and slows down the operation.  I had this happens when downloading programs.

  If your problem is solved, please click "accept as a Solution.

• Presario CQ60-212EM not able to connect to WiFi WPA Virgin Media

  I'm grateful for any advice. I'm pretty good with computers, but not an expert. My two daughters-in-law have Presario CQ60-212EM laptop and we first met a problem connecting with a new router at home. Finally, a spark to Maplins suggest change us the security from WPA to WEP, and worked well.

  The problem now is that one of my daughter-in-law lives in a House with a wi - fi of Virgin Media and they are not able or willing at this stage adjust security. Is there anyway that this laptop can connect to WPA? (Interestingly, she had this problem last year in a House different with Virgin and Virgin not couldn't even connect to it, but I'm always hopeful.)

  Yesterday I tried to connect him to the wi - fi in this new House. The laptop sees the router and asks for the password, but it can not connect. I don't remember the message, sorry. We were able to connect with our phones, so we know that the password is correct and the wi - fi works.

  It is running Vista. The computer was bought in 2009. I don't know if she did the Windows updates. I found some information on the update of drivers for Broadcom and Athereos cards, but I don't know what has this laptop. The specs seem vague:

  

  Thank you for advice or ideas!

  Hi Aimee88,

  Take a look at this document which contains all sorts of troubleshooting of networks.

  Please let me know if it helps.

• ePrint impossible to login if you are a customer of Virgin Media

  Basically, I have an hp printer that I can not access because HP wants to merge my account x with the snapfish account that has the same e-mail address.  The problem is that the snapfish account is provided by with my account virginmedia broadband.  I try to connect to hp eprint and he asks me to combine accounts, the problem is that the snapfish account has been created by virginmedia, I can only access the snapfish account to log on the site web virginmedia.  I have no password for the account, I can not change the password in the snap fish, I can't connect directly through snapfish, and if I ask a password of replacement of snapfish he points out that I can't do and gives me a link to Virgin media.  HP can you please provide an option to not combine eprint accounts with the accounts of snapfish.

  If anyone has found a way around it, any assistance received with gratitude.

  Concerning

  Simon

  Hello karnege,

  To print a new code, you must remove the Web Services, then re-enable web services and the printer then prints a new code.  Depending on your printer model, the steps vary slightly.

  You need to know before doing this as you will need to change the address ePrint, once you add the new code to the printer to printing Center.  Your old address ePrint will be locked out for 6 months for security reasons.