Wiring and test of the Blackbird 002 video card fan

Similar Questions

• Re: Satelite L750-1MT - cannot see the Intel integrated video card

  Hello

  I have Satelite L750-1MT and Win 7/64-bit and I can see the integrated Intel video card in Device Manager, so I can't install the driver for it. The laptop works with dedicated map, but why I can't use built-in one card too?
  On the site I found the Intel driver only for Windows 7/32 bit and not 64-bit.
  What can I do to use the onboard too?

  Sorry for my English.
  Thank you!

  I can see on the Toshiba download page, all drivers for Win7 64 bit are available and display driver for your model mobile, you can find HERE.

  According to specification of mobile has your model of laptop NVIDIA graphics card so I put t understand why you need Intel display driver. Am I missing something?

• I have a HP Pavilion Elite e9250t desktop PC and I want to upgrade my video card

  I have a PC desktop, HP PAVILION Elite e9250t with the specifications below. What graphics card can I go to? I currently have the Radeon HD 4650 with 1 G memory in the form of video card. I want something more grand, better and faster to run Borderlands 2 on high ground. I'm burning my card at 1920 x 1080.   Help, please.

  Processor: Intel (r) Core i5 CPU 750 @ 2.67GHz

  Graphics card: ATI Radeon HD 4650

  Total RAM: 12.0 GB

  The Kinder answer is that you must decide what is important.  Go to this site and use the section "I can run." You can put in different maps and display the results. But the game you questions about the needs at least the GTX560.

• What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)

  What is a simple but effective update to the XPS 8500 video card? (Computer complete Newb)

  
  Hello Dell Community. I read through the sticky XPS compatibility and some discussions on upgrading video cards. However, I couldn't find something that fits my needs. If you all can help me with this, would be great!

  Characteristics of the computer:

  • Dell Xps 8500
  • Intel Core i7-3770 CPU @ 3.40 GHZ
  • 16 GB of Ram
  • 64-bit operating system
  • AMD Radeon HD 7570

  Needs:

  • Run newer games of 2014/2015 without lag on medium to high heat (GTA V)
  • Relatively easy to install (remove some screws and paste the video card in and voila!)
  • No need to upgrade the power supply

  Budget is $ 200-250:

  • Obviously the lower the better and if need be, the budget is flexible. Depends on if the gain is important for the payment of the sum.

  Look forward to your answers!

  Thank you

  Richard

  A card that I know works is $200 would be

  EVGA GeForce GTX 960 SuperSC ACX 2.0 + 2GB GDDR5 128 bit 02 G-P4-2966-KR that it comes with a 2 X 6 pin cable 8 pin Y so the stock power should be good.

  

  more than 2 GB will not improve the map and it will increase the price.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487091

  http://www.Amazon.com/EVGA-GeForce-dual-link-graphics-02G-P4-2966-KR/DP/B00SC6HAS4

  Don't get me wrong although it won't make a video full screen 4K.

  To 3-way SLI GTX 980 and a power of 1500W power supply in an area 51 triad.

• I want to return the product to stop the renovation and to remove the data from credit card

  I want to return the product to stop the renovation and to remove the data from credit card

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Video of s3100y scrolling problem and the addition of video card

  I have an intermittent problem with the screen scrolling on its own, especially as I move the mouse. I suspect it is the video card material which is integrated motherboard. Usually, I can restart and it works fine for a while. I wonder especially if it is possible to turn off the video and add a video card to my system which is a slimline s3100y desktop computer. I am running Vista Home Premium SP2. Or other suggestions to solve the problem. I haven't noticed mainly in the browser, the two current Firefox and knowledge

  Thank you!

  Hello

  You can try to reinstall or update the graphics drivers. This is an update to the Intel Expressdrivers.

  Have you tried a system restore point before the appearance of this problem?

  Another option is to save your data, you need and make a recovery of the plant using the partition recovery or your recovery disks.

  Finally, if all fails to correct the problem, you can add a discreet graphics card.

  He will need a card low profile capable of running on a 180 Watt power supply.

  Here are some discrete graphics card options, your PC has offered to purchase:

  GeForce 7300LE

  GeForce 8300GS

  GeForce 8400GS

  GeForce 7500LE

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• Wired and wireless at the same time HP Laserjet MFP M226dw Pro

  Hi all

  I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

  To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

  Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

  

  Thank you

  According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models:

  

• Wired and wireless at the same time

  Printer: hp photosmart 6520; operating system: win7; router: linksys

  When I arrived to this printer, I have used the USB connection and everything was fine. Then I changed to wireless mainly to use eprint.

  This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  My question is: can I get the printer to function as both wired and wireless? If so, how?

  maxie987 wrote:

  .. This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  Hello

  They are LOGICAL printers to separate the physical connections.  Before, you have made a conversion of USB-wireless (has removed the printer), but now you have TWO connections. Yes, we can use both connections at the same time, but when you send a print job to print your computer need to know how which.

  Kind regards.

• Aero and the on-board video card in PC Home Premium

  Recently, I tried to run the Aero to my system feature and found it does not work because the video card was not able to manage this feature, but it's the video card that was shipped with my purchase of the home edition Premium 64 bits of the system. I would like to know why this is so?

  Recently, I tried to run the Aero to my system feature and found it does not work because the video card was not able to manage this feature, but it's the video card that was shipped with my purchase of the home edition Premium 64 bits of the system. I would like to know why this is so?

  ===================================================
  Might be worth trying to contact the computer manufacturer and ask the question.

  The following link can be also worth a visit:

  Solve problems with Windows Aero
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can not put computers wired and wireless on the same homegroup

  I have a newbie question. I can't figure out how to put a computer cable and a computer in the same wireless Group of residential. Here is my configuration:

  I installed Windows 7 Pro on two computers, one connected to the LAN from my router (Linksys WRT610N) port and the other has a wireless-N card. Both can connect to internet just fine. When I click on 'Network card' in the window network & sharing, two computers appear and the diagram of the switches and router seems correct. However, since they are not on the same 'local' network, Windows 7 does not offer the possibility to join the homegroup and each other.

  Having partially abandoned on homegroup, I tried to use usernames and passwords to share files between 2 computers (instead of homegroup.) If I click on 'Network' of the computer wireless, wired computer appears, with the folder that I set to 'shared '. (Partial success). However, if I click on 'Network' of the computer cable, the wireless computer does NOT appear.

  All I want to do is to share data between the two computers. What is the best way to set up the network?

  Thank you!

  Don't know which question you answered, but you obviously did not read my question before you posted this reply directly from the windows help page. Fortunately, I answered my own question.

  After much reading, I suspected a firewall problem. I have reinstalled Windows on the computer before installing the same Norton security suite and wireless, I had used before, I tried sharing folders again and voila! It worked. So, I'm not going to install all _ which comes with security suite Norton and go instead for a simpler solution of an antivirus program like AVG combined with the firewall that comes with Windows 7.

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Stripes red and yellow on the monitors when videos are paused

  Hello!

  Since the update of OS X El Capitan, has developed a weird problem on my version of first Pro CC red and yellowish stripes appear on a few videos, only when the break. When these same videos play, scratches disappear (I want to just point out that this has nothing to do with the area of rendering). This happens only with specific codecs like H264 or ProRes (but possibly not limited to these), on the screens of the source and the program, independently of the timeline.

  

  If I get a box with a defective video clip, scratches remain while the video is playing.

  I tried to clean the cache, changing its location, change the calendar settings, creating new time limits and all new projects... That did not help. And when I import the same defective video clips in FCP 7, they work very well.

  What is a codec problem? If so, how do I go and solve it? Any idea?

  Thanks a bunch,

  Jonathan

  Hello

  Plese check the thread below.

  Problem in the public beta version of OS X El capitan

  Vinay

• When the latest EVGA video card will be approved for Mercury Playback Engine GPU acceleration?

  I built my system of video editing, Windows 7 Ultimate, EVGA GeForce GTX 570 graphics card and motherboard ASUS Rampage III Extreme i7 920 Mhz, 24 GB of RAM. I decided to update my video card for EVGA 660Ti with many more CUDA processors and 3 GB of memory, but when I made the video I got this message "the project last used with Mercury Playback Engine acceleration GPU, which is not available on this system." Software playback engine Mercury only will be used. "and it seemed that the rendering is slower. Even if the newer video cards EVGA have more memory and processor and power more CUDA cores and best score on Intex experience Windows, Adobe does not approve them and say that they use the GPU Merecury Playback Engine acceleration. Why? Quadro cards are much more expensive have less memory, less CUDA cores but are rated higher by Adobe for creating and rendering, why is - this? What gives? Why EVGA which seem more powerful and cheaper cards rated lower than cards Quadro? This will never change?

  These cards just have not been tested yet, is all.  But if you go in the program of the PP folder and just delete the cuda_supported_cards.txt file, you should be good.

• Pavilion Elite PHE 450 t PC: intermittent Desktop closed, noise from the video card fan.

  My office has developed a problem in which she stops 10-15 minutes after a cold start.

  I have a Pavilion Elite HPE 450 t running Windows 7 64.  I tried dusting and open the box, but it keeps happenings.

  In addition, my video card, an NVIDIA GeForce315 G 1 fan makes noise.

  I have 2 questions:

  1 ¿is this fan an item repairable, or I have to replace all?

  Can 2 how I check the power supply to see if it is not part of the problem?

  Is there there tensions I can measure to see if its OK?

  My query related to food, is that I run a couple of terabyte drives out of the office, and I wonder if I'm loading down the power.

  I would appreciate comments, suggestions, etc.  Thanks in advance.  Thank you folk being here to help that old man.

  Leon R.

  Greetings,

  It seems to be a possible thermal problem with the graphics card fan.

  The fan on the graphics card work? Remove the side panel to check. Yes, you can remove the side panel while the system is turned on.

  Do not touch internal components. Just inspect.

  The Geforce 315 is a riser. I've never replaced graphics card fans, but I guess it's possible.

  A power failure is always a possibility.

  Eliminate food, the more reliable is to temporarily connect a good diet known to the system.

  The system was stable before the thermal emission of fan noise and possible? That should remove a power supply problem.

  You can replace the graphics card. Your PC has many options that were available for purchase.

  Please see here. Select "Options of material", then scroll down to 'Graphics '.

  See you soon!

• NB200 - allocated for the 128 MB video card only

  Hello!
  in the specifications, we can allocate 224 MB of memory for the video card, but in windows, we can assign only 128 MB.

  Someone at - it a solution?

  Hello

  The video RAM is shared with the normal RAM (system memory). This means that you can get up to 224 MB of video memory to it of necessary, but if the graphics don't need of more memory, 128 MB are only.

  And, you can change or control by yourself. This is done automatically and it of really not necessary to change something.