Can not put computers wired and wireless on the same homegroup

Similar Questions

• Wired and wireless at the same time HP Laserjet MFP M226dw Pro

  Hi all

  I'll put up an MFP HP LaserJet Pro M226dw.  Connected by ethernet with a static IP address.  I also want to connect to the wireless network but when I try I get the status message: not enabled.  Unplug the network cable in order to activate the wireless connection.

  To me, it sounds as if you may have either ethernet or wireless but not both simultaneously.

  Is this really the case?  AirPrint works however it is best to attach the printer to the wireless company.

  

  Thank you

  According to this guide "Getting Started", you cannot use both wireless and wired network connections at the same time with the LaserJet Pro MFP M225 or M226 models:

  

• Wired and wireless at the same time

  Printer: hp photosmart 6520; operating system: win7; router: linksys

  When I arrived to this printer, I have used the USB connection and everything was fine. Then I changed to wireless mainly to use eprint.

  This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  My question is: can I get the printer to function as both wired and wireless? If so, how?

  maxie987 wrote:

  .. This morning, I decided to go back to the wired USB connection - has been able to accomplish it, but with considerable difficulties - and now I have 2 printers in the folder of my printer (photosmart HP 6520 and photosmart hp 6520 (network).)

  Hello

  They are LOGICAL printers to separate the physical connections.  Before, you have made a conversion of USB-wireless (has removed the printer), but now you have TWO connections. Yes, we can use both connections at the same time, but when you send a print job to print your computer need to know how which.

  Kind regards.

• Bug. Can not put two edge animations animate on the same page

  Alrighty. Just thanked Adobe for fixation sensitive question scaling. Now, it seems to be a new. When I put two animations dashboard run on the same page, they both disappear completely from the view! Both in mode live view (or which saw fluid grid) and trying to get a glimpse into any browser. The responsive design works fine but if I put two animations on the same page that the two just disappear! GONE!

  Perhaps there is a code that I can use to prevent this. I did a number of tests during the last hour. My smile (from the reactive solution) is now again a frown. I can't keep working like that. Please let me know if there is something I am doing wrong. I have two animations on a page without worries prior to this version, but the delicate design did not work properly. The responsive design work NOW, but I can't have MORE than ONE ANIMATION on the same page. Thanks for your time. Best regards, Julian.

  The use, I did the modification required:

• Can my MG6320 to connect wired and wireless at the same time?

  I have a MG6320 on a wired / wireless internal - can he connect both at the same time, or what I have to choose one or the other?

  Hello.

  Only one network connection may be used at a time.  They cannot be used simultaneously.  This is the case even for one of our products PIXMA network with Wi - Fi and ethernet connections.

  If additional information is required, please call us at 1-800-OKCANON.

• I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  See:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the computer has windows 7 64 bit.

  IPEC software crashes and the error says that it has to do with the 3.5.1

  .NET 3.5 is part of installing win7

  .NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.

  Installing .net 4 does not .net 3.5

• CAN you have both wired and wireless enabled on HP Officejet 6500 CN557A

  We have an internal network where our HP Officejet 6500 is connected and working.

  We also have public wifi we would like the printer to connect to, so we can have clients to connect to public wifi and print to the printer.

  Box wireless and be active at the same time on this printer (and other Officjets with similar capabiltiies)?

  Greg

  Hi myitanalyst,

  JO 6500 supports one 1 type of network connection is to say either wired or wireless, but USB and network can be connected at the same time

  ex: USB + Wired or wireless + USB.

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• can not put a new tab to open the default google search

  I found these instructions:
  In case you need more than one step by step:

  (1) in a new tab, type or paste about: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

     Page thumbnails (default) => about:newtab
     Blank tab => about:blank
     Built-in Firefox home page => about:home
     Any other page => full URL to the page
  

  Press Ctrl + t to open a new tab and check that it worked.

   However as per the attached screen shot, I do not have a preference "browser.newtab.url"
  

  Hi, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• HP Pavilion Desktop Window Vista ultimate 64-bit. Failed to start. Can not put in safe mode, cannot restore the system.

  HP vista ultimate: commissioning can not repair computer: Signature of the problem, Startup Repair v2; ongoing state: the disc problem signing 01:system; 02: 6.0.6001.18000.6.0.6001.18000 04:196611 03:05 6: registry corrupted 06: no causes 07:0 08:2 09:WrpRepair cause of root of ID:1033 local 10:0 found: c0000218 Bugcheck. papameters = 0x9046cc98, 0 x 0 0 x 0 0 x 0 Action required: System Restore. Result: Failure error code: 0 x 490 of this office that I bought as recently used pc, I have No Boot up, recovery disks. Please can someone advise? »

  I think that some malware has been inadvertently downloaded and deleted the entry of game and ran anti-virus and found no malicious software, again, I think that this has caused the problem I have now.

  Any advice appreciated,

  KatyK

  Hello

  Yes, you can create a repair disk.
  a. Click Start.
  b. click on all programs.
  c. click on Maintenance.
  d. click on create a system repair disc.
  e. Insert a DVD into the drive, and then tap on create disc.

• I can not run any .bat and cannot open the cmd prompt

  I can't run the files .bat and most horrible thing I've ever met is a missing cmd.exe. It's starts with me trying to play Assault Cube, which must run on a .bat instead of .exe like other games. But whenever I try to open a batch file, it keeps gives an error "Windowscannot find"file to the .bat file (directory)". Make sure you typed the name correctly and try again. "Each. Time.

  So, as everyone will do, they search the Internet. I would like to do is short.
  A virus? No, my laptop is clean after scanning with Malwarebytes. You have to open as an Admin? Yes, but I got an error saying "this file does not have a program associated with it for performing this action." Please install a program or, if such is already installed, create an association in the default programs control panel'.» Tried to do? Well I think that it is impossible for the command prompt to be included in the default values list. I tried open the command prompt by typing "cmd" and pressing on enter the Start Menu? So many times I've tried, but it's endless. Whenever I do this, the command prompt displays upward and 0.5 seconds later, it's farm/accidents/output by itself. Now 0.1 second.
  So, I thought on this subject and I typed in the start 'Command Prompt' Menu. When I see the icon, it's like the path or the file is missing of some sort. So I click right on the top that says "Command Prompt" and click on the option "open the file location, which made me feel weird as there should be no such thing as an option for a file that is part of the folder system32." I was directed to ' C:\Users\Acer\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Accessories'.
  I found a shortcut to the command prompt, but I checked the file in "position to open the file", the location of the file is not displayed (opens in a new window as every time it is done). Also the guest who said when every time the .exe is missing is not indicated where we gave options to remove the .lnk. But it shows same either. If the file should be there, but it seems that the cmd is absent when I searched in system32.
  So, I'm at the blunt end to try to do things and to rely on some other cmd work and one question remains to ask with your opinion, are there links to download Microsoft cmd or is it even safe to use the another cmd PCs or by downloading?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• m251nw usb and wireless at the same time?

  I'm about to buy a m251nw laser color printer, but I want to make sure that it can print both a wireless connection and a USB on my desk at the same time.  I read the manual, but we didn't on this point.  In other words, I want to be able to print from the desktop via USB while for example my wife prints from the iPad at the same time.  Thank you.

  Hello

  Yes, there is no problem.

  While that wired (ethernet) and wireless network connections do not work simultaneity, USB and Wi - Fi can operate and will not interfere with each other.

  Kind regards

  Shlomi

• wire Window 7 and wireless at the same time

  I was able to use both wireless and wire NIC on Dell Laptop M6600 window 7 64 bit well before, but lately the wireless is disconnected if the wire is connected.

  The without wire is connect to the router to access the internet and the wire is connected to my test unit private stand alone.

  I remember I go to Device Manager, right click on my wireless NIC card then there is an entry there for me to NOT turn off wireless when the wire is connected, but I can't find this option more.

  Help, please.
  Thank you
  Tom

  Hi thtran_usa,

  Welcome to the Microsoft community!

  From your problem description, I understand that you can not connect to the wireless network and at the same time. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-Ult-how-to-maintain-concurrent/87f639bd-0E41-406c-AABB-7200a08514ec

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.