With an average of lines in a multidimensional array

Similar Questions

• With an average through lines

  Hello community OR.

  I built a VI that basically output voltage of some maximum voltage to a minimum voltage to this maximum in n steps (any user specified) and measure a voltage at each stage. It is all contained in a loop for having multiple scans.

  I would average input voltages on all of the scans for each step and display it on a XY chart as the tracks VI *. My idea is to have a table built for each step and each time a sweep through this step, it adds to this picture. Then I can run it through a mean.vi and display it. I expect advice on how to impliment it. Thank you for those that you guys can give and let me know if there is anything that I need to clarify.

  * Each scan through twice the output voltages, but the input voltages will be different for scanning to the low vs place due to the physics of the experience if I'm not on average scans parts.

  I guess the steps are also spaced and the same for each analysis. In this case, a simple graph is sufficient, no need of a xy chart.

  Due to hysteresis, you create two tables, one for the top and one for the bottom. Initialize to zero and add new values for each of the steps that happens (filling from the rear to the scan from the bottom). Divide by the number of tests at the end in order to get the average for each.

  Of course, you can also create a single table for each pair of worms up and down and use an xy graph.

• With an average of a spectral waveform and view / save

  Hello world!

  I am currently on a University project that consists on the use of Labview to obtain data and spectra of atmospheric plasmas using a spectrometer Ocean Optics HR4000.

  After not not using Labview for almost a year, I managed to get most of my knowledge back and I managed to display the spectral waveform, that I expect to get. However, as this is a fairly simple design I get a lot of noise and I would on average it for a graphic display more smooth.

  I looked into a lot of messages from the forum, but I couldn't really find what I was looking for.

  I also had a problem when you try to save the data and Spectra: I can't find anything in the directory of my VI.

  In the attachment you will find the current VI I'm trying.

  Thanks in advance for your answers!

  Jeremy

  I wrote an example for you below. This is an excerpt from VI, so you can drag the .png in your diagram and it becomes code. Pretend that everything in the green box is your Subvi spectrum acquisition.

  -Place the Subvi in a loop to run as many times as you like on average there

  -Out of the loop For is a table 2D with individual spectra on the lines

  -Transpose output, so individual spectra on the columns

  -Enter the table another loop to take the average rank by rank (with an average of different Spectra togeter).

  -Output is 1 d spectra average table

  

• 5.6.1 pages: How to create a table with more than 999 lines?

  5.6.1 pages: How to create a table with more than 999 lines?

  The table on Pages v5.6.1 line selector is limited 3-digit, as it is in Pages ' 09 v4.3. Either use LibreOffice Writer, who does not have any constraint line on processing tables 3-digit, or any application spreadsheet for top 3-digit row needs.

• Covered wagon with an average of analog voltages DAQmx

  I searched through screws, I can't seem to find something that will automatically average numbers of boxcar fed into it. I am trying to create a feature of my software that will allow the dynamic configuration of the car covered with an average of some inputs. I would like to avoid hard-coding tables which are filled/rotation etc etc.. Any help is appreciated

  Thank you

  If you use a Functional Global to store the values and call that VI of two different screws, you will access the same data. You could use two Global in the functional shift registers and use a selector to place / extract data from / to the appropriate shift register. Only VI call access one commune VI at the time, so one of the caller of the screw will be 'blocked' until the first caller is done. This does not usually work for data acquisition applications high speed.

  You might consider using named queues instead of functioning overall. You might be interested in this thread on the forums of LAVA that deals with boxcar implimentations. You create a queue for each data stream and can perform functions such as "preview" queue to get all items without actually removing them from the queue. If you use a LabVIEW 8.6, there is a new feature called with loss of queues. You set an upper limit on the size of the queue and "lossy enqueue" allows to add items at the end of the queue. If the queue fills up, then the oldest data element will be lost.

• with an average of 5 minutes of data - is no way

  I need average 5 minutes worth of data, save this average and then again on the next 5 minutes of data, with an average of this data block.  I tried to use the average function pt-pt in LabVIEW, but who seems to take an average continuous market, I do not want.  I probably read data once every 0.1 seconds, so I can not used stacked registers at offset, because it would be not very economical. I thought to build a table, but I don't know how to remove all the data at a time on average to it in an efficient manner, and more I'm stuck on the concept of re - create the table/clear the Board after five minutes of data has been collected, averaged and recorded.

  Does anyone have a suggestion?  I would really appreciate any advice or suggestions on how to go about it.

  Keep a running total in a shift register.  When your 5 minutes have expired, divide the sum by the number of samples taken, the sum to zero and start over.

• "Several times I am receving the dialog box with" visual basic command-line compiler.

  "Several times I am receving the dialog box with" visual basic command-line compiler.

  Hello

  1. This occurs when you use a specific application or all applications?

  2 did you a recent software or changes to the material on the computer?

  3. have you installed all versions of Visual studio?

  4. What is the finished message, that you have found?

  You can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

• How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  So I created a widget or a hosted form, and after finishing to complete to have a single view of signing, he puts another section or area below which requires another signature and send an article I don't want to have there. It creates another page as well because my original signature line is down.

  Then... How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  Hello

  By default the Widget to always an email and if you have not added field which, E-Sign would put a signature block (which consists of Email field) at the bottom of the document.

  Kind regards

  -Usman

• Find paragraphs with fewer than 2 lines

  The following is a script request...

  
  

  Anyone who wishes to create a script for me who find all paragraphs in a history selected with less than 2 lines and change the style of the paragraph.  It would be for use in a magazine for styling all body headers in a story.  It would be necessary to limit the changes only the text inside the selected story.  I would also need to be able to customize the name of the header of the body paragraph style.

  That's what you want and more...

  http://in-tools.com/plugin.php?p=6

  Substances

• How can I control mouse click event (properly) in a multidimensional array?

  Hi all!

  I have a question about the use of the events of mouse clicks in a multidimensional array (or a '2D' table that we refer to them in Java and C++).

  Background

  I have an array of objects of each with a corresponding mouse click event. Each object is stored in a place between [0] [0] and [5] [8] (so a 9 x 6 grid) and has the specific column and thus associated line number (i.e. tile [2] [4] has a 2 line number and a column 4 number, even if it's on the third row, fifth column). With each click of mouse, the tile that is selected is stored in a temporary table. Table is disabled if a tile is clicked that is not a value line or column equal to, less than or more 1 with the currently targeted tile (i.e. clicking tile [1] [1] clears the table is there are no stored tiles bearing the number of row/column)

  [0] [0] [0] [1] [0] [2],

  [1] [0], [1] [1], [1] [2],

  [2] [0] [2] [1], [2] [2]

  (or any column/line contiguous with another tile stored in the array, which means that the newly selected tile must only be sharing a border with one of the tiles of the temp table but not necessarily with the last tile stored).

  Question

  What is somehow clean and tidy this programming in AS3? Here are some parts of my code (although the mouse click event is not finished/working correctly):

  service public tileClick(e:MouseEvent):void
  {
  var tile: Object = e.currentTarget;
  tileSelect.push (uint (tile.currentFrameLabel));
  selectArr.push (tile);

  If (tile.select.visible is false)
  {
  Tile.Select.Visible = true;
  }
  on the other
  {
  Tile.Select.Visible = false;
  }
  for (var i: uint = 0; i < selectArr.length; i ++)
  {
  If ((tile.rowN == selectArr [i].rowN-1) |)
  (tile.rowN == selectArr [i] .rowN).
  (tile.rowN is .rowN selectArr [i] + 1))
  {
  If ((tile.colN == selectArr [i].colN-1) |)
  (tile.colN == selectArr [i] .colN).
  (tile.colN is .colN selectArr [i] + 1))
  {
  trace ("jackpot!" + i);
  }
  }
  on the other
  {
  for (var ii:uint = 0; ii < 1; ii ++)
  {
  for (var iii:uint = 0; iii < selectArr.length; iii ++)
  {
  selectArr [iii].select.visible = false;
  }
  selectArr = [];
  trace ("Err!");
  }
  }
  }
  }

  so, no matter what tiles are clicked, you only added to selectArr?  That is to say, if someone clicks on tiles randomly contiguous or not, what they added to selectArr?  If so, let the way you have it but change contigF().

  If you want to add a tile of selectArr if selectArr is empty, and when the user click on a tile adjacent selectArr, move the push() method to run If contigF() returns true and change contigF() to:

  function contigF(tile:DisplayObject):Boolean {}

  {if(selectArr.Length==0)}

  Returns true;

  }

  for (var i: int = 0; i<>

  if(Tile!=selectArr[i]&&math.) ABS (selectArr [i] .rowN - Tile.rowN)<2&&Math.abs(selectArr[i].colN><>

  Returns true;

  }

  }

  Returns false;

  }

• Table of elements - multidimensional arrays

  Need:

  I need a multidimensional array that I want to use through several workflow.

  Detail:

  The information for each of the 10 + child tables are attributes of static information of VC:objects as VC:sdkconnection, VC:DatacenterFolder, VC:NetworkFolder, VC:Datacenter, etc.

  Direction:

  My idea was to create a configuration for each of the table element.  Then, create a Parent Configuration element with an attribute type of elements in the Configuration table.  To test this I wanted to make one for each loop through the array of items.

  System.log("Total Number of array objects: " + ParentElement.length);
  for(var i=0; i<ParentElement.length; i++){
    System.log("Total Number of array objects name " + ParentElement[i].name);
    System.log("Total Number of array objects: " + ParentElement[i].length) 
  }
  

  I managed to print the names of the child element objects.

  I have been unsuccessful in obtaining listing attributes in the child objects.

  in the above code ParentElement [i] .length is undefined.

  Advice/guidance is appreciated.

  Even if your solution does not work, it gives me a new direction.  And ultimately a solution.  Without identifying each brick on the yellow brick road, here's what I came with.

  1. I moved all configuration items in a folder to create a category

  2 pulled all the elements (previous method began with an attribute of the element to set up an array of elements).

  3. by looping through the items looking for a match in the entry workflow a string to index into the items attribute

  4. once found populate the output of the workflow with the objects identified in this configuration item.

  It was exactly what I was looking for when I started this thread, but it gives me a dynamic solution for future growth.  If I need to extend my environment, I can do this simply by adding another element of configuration category and revisits not 100s of workflows.

  Thank you for your quick response, the expertise and the entrance.

  var class = Server.getConfigurationElementCategoryWithPath (categoryPath);

  If (category == null) {}

  throw "CI" "" + categoryPath + "' not found!";

  }

  var category.configurationElements = items;

  for (i = 0; i< elements.length;="" i++)="">

  If (elements [i] .name! = null) {}

  var attribute is elements [i] .getAttributeWithKey ("indexCode");.

  indexCode = attribute.value;

  If (attribute! = null) {}

  If (attribute.value == inputCode) {}

  attribute = elements [i] .getAttributeWithKey ("vc_sdk");

  vc_sdk = attribute.value;

  attribute = elements [i] .getAttributeWithKey ("vc_Datacenter");

  vc_Datacenter = attribute.value;

  attribute = elements [i] .getAttributeWithKey ("vc_hostsFolder");

  vc_hostsFolder = attribute.value;

  attribute = elements [i] .getAttributeWithKey ("vc_NetworkFolder");

  vc_NetworkFolder = attribute.value;

  attribute = elements [i] .getAttributeWithKey ("vc_DatastoreFolder");

  vc_DatastoreFolder = attribute.value;

  break;

  }

  }

  }

• AS3 multidimensional array

  Hello.

  I am new to AS3. I would like to know how I can create a multidimensional array (eg. 8 x 8) with for, or while. The values it takes only: red, blue, green, yellow and black.

  Thank you.

  If you want to choose the colors randomly, place them in a table and to randomly select one of them by using the methods of mathematics...

  var colorArray:Array = new Array ("red", "blue", etc...)

  for (var i: int = 0; i<8;>

  mArray [i] = new Array();

  for (var k: int = 0; k<8;>

  mArray [i] .push (colorArray [Math.floor (Math.random () * colorArray.length)]);

  }

  }

• Multidimensional arrays in apex

  There of multidimensional arrays in apex? I want to do is to display information in a table with 3 items... As a matrix

  I don't think it's possible in the APEX. APEX mapping has been implemented by AnyChart www.anychart.com.
  Oracle has not approved all types of graphics available in the Solution of AnyChart. Check here if they have multidimensional mapping solutions. You must purchase a license for the use of comprehensive charting solutions.

  Thank you
  Mehabub

• Generate multidimensional array strings

  I'm generating strings by concatenating the columns of multidimensional array. Let us look at this table. This table has actually 1000 rows and columns of 1000. It contains integers. I need to generate many strings by concatenating the columns for all rows. In this way I put it in a loop for. But my problem is that there are so many columns that I am not able to write these by hand because the number of columns to generate concatenated string has not been set and the number of columns to concatenate is returned by getNumberOfStringComponents().

  for(int i=0;i<array.length;i++){
  if(getNumberOfStringComponents()==1){
  string1=array[0];}
  
  else if(getNumberOfStringComponents()==2){
  
  string2=array[i][0]+"-"+array[i][1];}
  
  else if(getNumberOfStringComponents()==3){
  
  string3=array[i][0]+"-"+array[i][1]+"-"+array[i][2];
  
  //...
  
  else if(getNumberOfStringComponents()==1000){
  
  string1000=array[i][0]+"-"+array[i][1]+"-"+array[i][2]+"-"+......+"-"+array[i][999];}
  
  }
   
  As you see it is very inefficent to write string1000 because it needs  much manual processing. Could you suggest any good algorithm for composing these 1000 strings without writing if statement with 1000 branches by hand.
  
  Edited by: totalnewby on May 19, 2011 3:54 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  See http://download.oracle.com/javase/tutorial/java/nutsandbolts/for.html
  and http://download.oracle.com/javase/6/docs/api/java/lang/StringBuilder.html