With regard to the interactive report
I've created the interactive report, then I remove the function of adding/deleting/changing inside, because I put my function all in plsql package. I could handle the add and delete function changed, however, is totally giving me a headache. I create an anonymous PL/SQL (process) block when the click on the button Delete, then delete the button will trigger the javascript confirmation. and then in my anonymous PL/SQL block, I key inmyPLSQLpakacage.myDeleteProcedure(:p1_tableid);
When I run the system, the process got through, and the "success" message. However, registration is still there stay. I check my point, process and compare to that of the sample «Document Library 0.92» I just found out they got from the additional hidden (P75_RETURN), after the process, it will go to the Page (and P75_RETURN) which I don't understand.
Please help on this point, why my plsql did not, I try just to run the query in the anonymous pl/sql block as
declare
Identification number;
Start
ID: = v('p1_tableid');
delete from the table where tableId = id;
commit;
end;
but it's still not. So what's the problem with that?
Hello
BEGIN/END; It must be for all PL/SQL code.
However, your problem is actually on this piece:
0.01:... Process "reset page": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 52
0.01: removal of application cache "103" page: 52
You have a "reset page" process that runs immediately before your process - this clears the value of P52_TABLEID. This process is usually provided automatically when you create a form by using a wizard. Delete it or the Never value condition.
Andy
Tags: Database
Similar Questions
-
With regard to the output report
I developed the report XML can work successfully on the system but when I did that and the simultaneous launch then it is to show that 'Impossible to find the exit of the publication of this application' I checked several times but same error comes again & again.
Can someone help me on this
Thanks in advance...user13277628 wrote:
I developed the report XML can work successfully on the system but when I did that and the simultaneous launch then it is to show that 'Impossible to find the exit of the publication of this application' I checked several times but same error back & again.
Can someone help me on this
Thanks in advance...Hi and welcome to the forum!
I hope that your question relates to a specific theme and do not relate to the Oracle database
Please post your question under the appropriate heading -
Colon in link with the interactive report
Hello
I have two interactive reports which are connected by link column on one of the columns, the problem is that some of the values contains a colon
for example, the value is ABC: 123 , but the linked report a value = 'ABC' is generated in the filter
So I can see there are many sons and based on those I can escape the string using APEX_UTIL. URL_ENCODE so now I get Value = 'ABC % 3 A 123' in the filter that is still nothing.
So I think on the interactive report, I need to somehow convert the return value on the page so the interactive report can deal with it, but I don't see how to do this and I can not find all threads that deal with these.
I don't want to use an element on the page to filter the report the report is sometimes access directly and it would act/look different to other pages where we have it but don't have the problem that these values have no settlers. I can't remove the colon as they come from an external source.
We use the apex 4.1
Any ideas?WOWL wrote:
This isn't the real value, but I think that its close enough for users, if I were to create a dynamic of any idea action that she could do as my knowledge of dynamic action is limited.
Create dynamic Action to replace "_" with ":" when the IR is updated:
When
Event: After refresh
Selection type: Region
Region: IR / / whatever your areaReal Actions
Action: Run the JavaScript Code
Fire on Page load: Yes// Change 'Colon Val' in selector to heading of colon-containing column $("#apexir_CONTROL_PANEL_COMPLETE .fielddata a:contains('Colon Val like')") .each(function () { $(this).text($(this).text().replace('_', ':')); } );
-
link to the interactive report with filter
I tried to put in place a link to an interactive report in passing along a filter setting using the method described in the user guide. I've tried everything I can think of to make it work, but the report always ends by displaying as unfiltered. I don't get any errors, I don't see any filtering. I tried to directly modify the URL and adding the filter data (that is, add IREQ_ParentSeqID:2 to the URL) and I also tried to pass the filter data by creating a branch from another page and have the branch collar data. In both cases, I was unable to make it work. When I create the filter directly in the report, it works fine. Here is a sample
URL: / f? p123:1302:3440331697632217:no:IREQ_ParentSeqD:2
The URL takes me to the correct page but no filtering occurs. Here is the definition of the column in the interactive report:
Column name: ParentSeqID
Column type: NUMBER
I'm under APEX version 3.2.0.00.27Dale,
What happens if you remove the EQUALIZATION of the setting? Theoretically, it shouldn't matter, but I always send my equals as just IR_COLUMN and it works fine.You can try f? p = 123:1302:1023072115021841:NO:IR_ParentSeqID:25
and see if that makes a difference? Just a shot in the water.
If this does not work, try to delete the alias for the moment and sending the column full name and see if that makes a difference. I wonder if its because your alias is in a specific case (per the "")
-
Link to the interactive report with filters
I want to put a link to a page that contains an interactive report. But the link must set up a filter for the interactive report.
For example, if I am looking at a customer, I want a link that sends me the reports, but filtered to show only this customer already.
Is it possible to do?
Thank you
Published by: user1415525 on September 21, 2009 07:34Hello
Set a parameter Anthony
to # #. Example: Set IR_ORDER_ID to #ORDER_ID #.
or for you
Set IR_CUSTOMER_ID to #CUSTOMER_ID #.(Of course you must change the column names)
Greetings,
Roelhttp://roelhartman.blogspot.com/
-
Filter delete automatically the interactive report
Hello world
We are seeing the question in the filter APEX. I applied the action filter-> filter. the filter is applied as expected. then we are navigate current page to another new page. When we return to the old filter page, we are not able to get the filter.
For example: we have the "amount" column I applied a quantity of filter > filter 0 on page 1, then page 2 accessing we. When we return to page 1 we are not able to find the amount > 0 filter
Let me know how to solve this problem.
Kind regards
Sushant
Hi LnTInfotech,
LnTInfotech wrote:
Hi Sunil,
Thanks for your information, but in my case, we do not save the default (primary) report. We have to got to page 1 to page 2 with any filter and return back to page 1 need to show the same filter.
Kind regards
Sushant
Are you compensation/reactivate the interactive link (button, breadcrumb) report? Reference: a link to the interactive reports
As clearing (CIR) /resetting (IRB) interactive report leads to clear the filters applied to the interactive report in the session active.
Note: Filters / other attributes of the action menu applied to the interactive report are specific session, user may choose to save it as a saved report interactive and developer can choose to save as the main report.
For more information about interactive reports see the Oracle APEX documentation and tutorials available on Oracle Learning Library like this:
I hope this helps!
Kind regards
Kiran
-
How can I rearrange the columns in the not displayed section of the interactive report.
Hello
My interactive report contains 185 columns and requieres users to build its reports with some columns, but he gets lost between this amount of columns, it would be easier if the columns in the do not display the interactive report section would be automatically sorted, is it possible?
Thank you very much
Hi Eva,
A solution would be to order the column names in alphabetical order. You can create a dynamic JavaScript action to manage the sort.
The shuttle of the attribute IR "Select columns" have the ID "apexir_SHUTTLE_LEFT" or hidden columns and 'apexir_SHUTTLE_RIGHT' to the displayed columns.
The function that you create might look like:
var options = $('select#apexir_SHUTTLE_LEFT option'); var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get(); arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; }); options.each(function(i, o) { o.value = arr[i].v; $(o).text(arr[i].t); }); var options = $('select#apexir_SHUTTLE_RIGHT option'); var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get(); arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; }); options.each(function(i, o) { o.value = arr[i].v; $(o).text(arr[i].t); });
You need to find the right timing for dynamic action to run, I suppose the click on the button "Select columns" would do the trick.
Kind regards
Vincent
-
Affecting a hidden page looking for the interactive report null element
Hi all
I'm a newb APEX and don't really understand processing and calculations very well yet. I want to do something fairly simple however.
I have a page with an interactive report and two hidden page items. I want to set the value of these two elements with the NULL value when someone search the interactive report. Any way to do it?
Thanks in advance.
Published by: darstar007 on March 25, 2010 16:31Kind regards
Shijesh
---
Please reward the answer if this was helpful or correct -
Initial value for the interactive report
I have an interactive report that has a where clause condition clause: where =(:P50_employeeName) used.
(: P50_employeeName) is a a list of selection without value null. When the page loads the selection list displays the value employee1, but the interactive report is empty. It's not until I select another value within the selection list becoems active report. How I can so when page loading the interactive report shows instead of being blank? I can't the values of hard employee-coding as each user can see only the user in their Department.
Hello
Since I don't know all your table structure, it was just a quick sampling of the approach.
I guess that your LOV would have the correct where clause to control its content, and you can add additional conditions to the IR where clause as well.
Here is an example of one of my IR where clauses
the case when: P200_DEPARTMENT = 0 then 1
When: P200_DEPARTMENT <> 0 and: P200_CREW = 0 and: P200_DEPARTMENT = c.crewdeptkey, 1
When: P200_DEPARTMENT <> 0 and: P200_CREW | " <> 0 and: P200_CREW = c.crewkey, 1
end if 0 = 1
Kind regards
Brad -
Filter column position of the interactive report
Hi all!
First of all, sorry my English.
I have a problem with filters standart on the interactive report column heading. Version 4.0.2 APEX. It is interactive report based on the view. Nothing unusual - behavior and the default templates. I have also the region of filter on the page, and after user-press "apply" button my package variables to session state of filter. View used these values. It is worked and filtered interactive report. But when I try also to use the filters on the heading of the column that is nothing past. I have try the column type: report Standart column and display text. I have try the Filter Type column: by default based on the Type of column and the list defined by the use of... Contain. Nothing, as no filter exists at all. Filtering with worked as usual action buttons. I think that this problem in a SEPARATE implicit in this filter. I know that there are quantitative limitation of DISTINCT values with column header filter, but I have nothing in the filter. And even I have type the value and press ENTER, nothing happened. Columns with Date type is fine, but String and number does not.
There is no work around? Thank you.
Solved within "parameterized" view, remove and replace with SELECT with params.
-
Contains no column 5 added to the interactive report apex
Hi, I added a column in the query to the interactive report region and it does not appear in the designer of the Page, as it is not available when running in the list of columns through the action of the report menu.
In the 4 apex when the query was changed directly a message was generated with the details of the new or modified columns, but the Apex 5 when I change the query and save, nothing happens.
How to view the new column?
Thank you.
carlosjch wrote:
Thanks fac586, I already tried to use view of the component, when I modify the query the new column is added, a message appears: area update. No details of the new column appears in the message. The result is the same, the column is not available after that.
What happens if you create another IR with the new query?
-
Calculations in APEX 4.2 on the interactive report and the update form
Hello
I know that people have asked similar questions, but I was not able to do this work. I'm doing some fairly simple math (addition, multiplication) in an application. I have 2 fields (VALUE_A, VALUE_B). I can get the addition and multiplication work in the interactive report, but I also need that it works correctly in the form of update. I also need update form to work dynamically so that if the values are changed, the correction calculated response is shown immediately on the update form and then reflected in the interactive report. I tried the dynamic action, with and without javascript without result. Any help would be appreciated.
Request Express 4.2.6.00.03
model application:
https://Apex.Oracle.com/pls/Apex/f?p=82162:
username: guest
password: Peanut123
Thank you
Rachel
ADD dynamic action
After refresh of region
Set value
ELEMENT the VALUE to change
check the fire on the load
To source, use expression JavaScript
If ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2")! = null)
{
parseInt ($v ("P2_TEST_1")) + parseInt ($v ("P2_TEST_2"));
}
ElseIf ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2") == null)
{
parseInt ($v ("P2_TEST_1"));
}
ElseIf ($v ("P2_TEST_1") == null & $v ("P2_TEST_2")! = null)
{
parseInt ($v ("P2_TEST_2"));
}
on the other
{ 0; }
That add another dynamic action on change POINT P2_TEST_1 and set even with the same expression JavaScrit action. but NOT fire on the load
Do the same for the ARTICLE P2_TEST_2And the same for A times B but change + to *.
Here, I did samples for you with this code.
-
How to add the action button for each column in the interactive report
Hi all
I'm new in APEX, so pls forgive my question, if it's simple, but I am struggling with this problem for days now. I have interactive report and you want to add button in each row. What I want to do with this button is the following:
1. to execute some stored procedure in need of that particular line item values
2. returns a (id)
3. go in another page in the application by passing the value out of the procedure (id).
and I'm not find the way to do it. I tried now means:
1. If I add the link of the column, so I can refer to the value of the current row, I don't know how to call the stored procedure and perform actions of rest I need
2. If I add the button to the region, I do not know how to reference the values in column of a particular line of the interactive report...
and I'm stuck...
I just forms and global report and probably still think the "wrong" way .
Any help would be appreciated!
Thank you!!!
user3253917 wrote:
Please update your forum profile with a real handle instead of 'user3253917 '.
I request of the company: there is a customer who always orders the same standard product orders (always order the same products, fair amount is different). I want to make it simple for the user: instead of retyping the command (master and few records details every time yet) I want to copy selected command (copy of the master record and record details) so that the user will only change date order (in master record) and amount fields in record details).
So, in order to give him:
1. the user must be able to choose the order in which I would copy (at page 4), select it,
2. I need to make PL/SQL procedure to insert the new master record (order) and a few record details (order_items) (copy of the order/order_items chosen in step 1)
3. navigate the user to page 29, where the master account at stage 2 insterted appears, so that the user can change the date and quantities.
Any solution will be highly appreciated! Thank you very much!!!
In simple terms:
- Add a link to column "Command copies" in the report on page 4, which sets the COPY request and passes the order ID on page 29.
- On page 29, create a process before header, sequenced to be the first process executed and conditional on REQUEST be EXEMPLARY, which creates a new order as a copy of the order with the ID from page 4 and returns the ID of the new order in the PK command ID of 29 page element.
-
Ideas for work around ORA-06502: character string buffer too small on the interactive report
Hello
It comes to Apex 4.2. We try to create an interactive report. The report is for something similar at a follow-up time. We try to concat a comments column as the sum of the hours. For example,.
Select TASK_NAME, sum (HOURS), to_char (XMLAGG (XMLELEMENT(E,E.COMMENTS ||) ' : ')). Extract ('//Text ()'). GETSTRINGVAL()) USER_COMMENTS of...
This query works fine if we seek only to a window of 1 week. The question that we live, when we expand the scope of the query to include data from 3 months, we hit ORA-06502 interactive report. If we remove this column from the interactive report, then the report works very well.
Anyone has any ideas on how we might be able to work around this problem? I'm guessing we're reached the limit of 32 k on the report. Ideally, we would show just the last X number of comments and then have a link to show all comments
Any help would be appreciated
Thank you
Mike
ListAGG raises an ORA-01489 for varchar2 > 4000 bytes
OP has an ORA - 06502--> IR is running within a limit of 4 k / 32 k.
quick fix: wrap USER_COMMENTS ListAGG in a substr (..., 1, 4000)
Longer solution, use a subquery to modify comments based on ROW_NUMBER() (IE after the nth line, change the null)
with -- simulating data t as (select task_id, sysdate - lv as date_entered ,round(dbms_random.value(1,24)) hours , '-*' || lv || '.' || task_id || '*-' as user_comments from ( select level as task_id from dual connect by level <=10 ), (select level lv from dual connect by level < 1000) ), -- modify data modified_data as ( select task_id, hours, date_entered ,case when row_number() over (partition by task_id order by date_entered desc) < 5 then user_comments else null end USER_COMMENTS from t) select task_id, sum(hours) total_hours, listagg( user_comments ) within group (order by date_entered desc) || case when count(*) >= 5 then '! MORE COMMENTS !' else null end as user_comments from modified_data group by task_id;
-
Move the 2 values to 2 elements in the interactive report via a url
Hello
I have it here's the url to pass the 2 values to 2 elements in the interactive report via a url
apex_util.prepare_url ('f? p = & APP_ID.:0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code, '1 year') in the form of url
The second value is not passed in, P000_DATE the interactive report item. "1 year" is the option in the selection list on . I also tried below and a combination of IREQ_, etc., but no worked
apex_util.prepare_url ('f? p = & APP_ID.:0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code,'| 1 year "")
Some advice on this one?
Thank you
Alexander
The code doesn't seem right for me
apex_util.prepare_url ('f? p = & APP_ID.: 0 00 :'||: APP_SESSION |':000:P000_STATUS, P000_DATE :'|| ccodes.code, '1 year') in the form of url
Ilyalieude modifierlereglement like this.
apex_util.prepare_url ('f? p = & APP_ID.: 0 00:' |: APP_SESSION |) ": 000:P000_STATUS, P000_DATE:' |" ccodes.code | 1 year") in the form of url
Kind regards
Maybe you are looking for
-
screen with the apple logo illuminated
Help! I have an ipod nano 7th generation. The screen stays on with the apple logo and will stay on until he dies. He died not even when I try to turn it off or restart. It turns off for 1 second and back on the screen turned on. It does no disk mode
-
Camileo H30 plays movies under Win XP
I recently bought a Camileo H30. I installed the AcrSoft software.I also installed a VLC Player. the MediaPlayer10 need to Windows is up to date.I run Windows XP Home Edition. When I try and play the recorded videos either directly by the Camileo or
-
Call a DLL in an integrated project
Hello world I created a Subvi, which returns the recognized audio devices and readers who are searched in a specific way. For audio devices I use lvsound2.llb functions. When I call these functions as soon as it works fine, but when I change the conf
-
Repeating the Excel 2003 security updates
This last Tuesday, downloaded Windows updates and installed a first series of 10 updates, then during the next hours downloaded and installed at least four or five more simple updates before finally obviously get what she wanted and that constant upd
-
Bluetooth: logitec wireless speaker adapter
HelloI try to install the speakers Logitec wireless adapter to connect my netbook to my audio amp. The device don't pair but then asks a pilot missing and win7 brings me to this forum. Support is much appreciated.Gustav