With regards to the previous post

Similar Questions

• With regard to the previous discussion on the recent settings of the workspace page

  With regard to the post Re: recent files page , when I went back to answer, there is no way to reply to the post.  After trying the settings using the provided screenshots, page of recent files always came every time.  So the answers you have provided are not correct for my particular case.  Finally, I tried without any control in the preferences and that my custom workspace save as I wanted.  Here is how I had to define it.

  Thank you.

  

  It is doubly strange.  I just check and that the other thread is not locked and can be answered.  Someone else has a problem, you reply to this thread.

  Secondly, I turn off the settings described works for me and Photoshop opens without MRU and start work space.

  You did _uncheck_ these settings?  I like the new workspaces, so mine are checked, but it clearly says _Show_ at the beginning of each line.

  

• With regard to the total of a line

  Hi Experts,
  
  I have a report that the HS as a scheme where there is declaration of prod and date and the amount sold is there. Now my problem is if I want to display the sum of the total amount before a specific date to say(8/31/2009) for the year 2009 in a steamer.
  
  My reprot should show me the overall sum of the quantity sold before that particular date chosen for this year in a single line. the date that is selected is dynamic.
  
  can I reach through the MSUM functionality.
  
  
  Can someone help me...

  First of all, I agree with the previous poster: If you want to help your specific problem, describe it accurately (and briefly). Second, award points if it is useful. This shows the label forum. There are enough posts in this forum to explain what it means that I won't go into it save to say look at the high post by Justin Kesterly, one of the moderators of the RTO. Now about your problem...

  Yes, you will need guests and presentation variables dashboard for your (now more complicated than your question first, but still doable) goal.

  The first question is building correctly your report. Once this is done, you can basically follow the same procedure I gave above to get your total great line.

  What you need is a column that displays your measure for the "two months" and another column to view your measure "for the rest of the months of the year.

  Look at this link:

  http://oraclebizint.WordPress.com/2008/03/11/Oracle-BI-EE-101332-rolling-yearMonth-and-date-filters-moving-window-filters/

  Modify this to get the number of months (the blog is about years). (This blog gives the flexibility to the user to limit the report to the "current year" and "return of two months".) You can, of course restrict the scope of your report if required).

  Using the information collected from your guests, you can now calculate your two measure columns using the column filter (see filters on columns for details) and the PVs and TIMESTAMPADD function.

  This should give you enough to help you get started.

  Now, click in the top right of my two posts where you see 'useful' before you forget! ;)

• With regard to the application of Nook on the Surface RT. Is there a way to change the way that newspapers appear?

  With regard to the application of Nook on the Surface RT.  Is there a way to change the way that newspapers appear?  Like corners, they give a better way to navigate and get the overview for the different sections.

  Probably not "such what."  Next time you launch the application, make sure that the menu bar to it and see if there is a feedback icon.  You may be able to comment on what features you want and they can do just that.

• I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the same scale of assessment pr

  I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!

  Activation for CS is closed. Adobe provides you with a free replacement of CS2.

  Uninstall CS

  Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products

  Click English, download Photoshop CS2 and also copy the serial number that comes with it.

  Install CS2 and use this serial number CS2. There no need activation.

  Take your copy of the CS, it is no longer usable.

• With regard to the update of the locations of cards-oracle

  HII everyone,

  In my application, we using mapviewer, which was installed locally on our server, for map rendering and showing the locations of a client like pinball machines.

  Suppose that some places (address, City) is updated map... How mapviewer (which has been installed on our server locally) will update this site all in rendering...

  Thank you

  learner

  It depends on how you got the map features.  Mapfeatures are usually stored in the cache.  If a change in database may not appear in the card immediately.  If, however, given the characteristics of the map as a vectorlayer, then simple vector update updates map.  You should consider two options with regard to the update database process.  You can store the geometry as a function that is updated on the fly as change attributes of database, or you may use a database trigger to update the geometry when the attributes change.  Thus, using a combination of correct space architecture and mapviewer correct functions.

• With regard to the management of exceptions in coherence

  Hello
  I use c ++ connection of consistency
  
  try {}
  String::handle gridHandleCache = GridCacheName;
  
  if(hCommCache == null) {}
  hCommCache = CacheFactory::getCache (gridHandleCache);
  }
  else {}
  
  "cost < <" Info: "< < GridCacheName < <" Cache already in a State of assets "< < endl;"
  }
  }
  {catch (exception::handle Vex)}
  
  "' cost < < ' consistency exe;
  }
  {} catch (std::exception (e)
  cost < < e.what ();
  }
  catch (...) {
  cost < < 'unknown exception ';
  }
  
  
  When the error occurred (duration or other errors), I still get an exception unname. It will never enter the Exception::Handle part of vex.
  
  When he calls on Wrestling (Exception::Handle vex) {.} I want to separate the duration and connection error ecpetion sepeartyely.
  
  Can I know what would cause / or how to handle it separately.
  
  What are the mistakes is possible to connect / put/get/invoke (touchprocessor). serializable cast?
  
  
  -Thank you
  
  Edited by: 882600 August 31, 2011 05:51

  There are several ways to achieve this. Perhaps the simplest is to simply catch Exception as std::exception const &, or one of its derivatives, then call what(). However, if you want to use the specific exception hierarchy richer consistency, you can get the equivalent of the what() result by calling getDescription()-> getCString(). With regard to the rankings largely what types of exceptions are "fatal", which would be RuntimeException and its derivatives, but the scope which it was caught in general is going to be more telling.

  Mark
  The Oracle coherence

• I have a problem with access to the previous page.

  Original title: confused in Alberta

  I know few things about my computer regarding terminology, etc. that I use only for info and email.  I have an Acer Aspire and run Windows 7.  For a while now, I was able to go to the previous screen with the arrow at the top left.  Any suggestions because it is only a disadvantage compared to several other questions that plague me now.  Thank you for taking the time to read this.

  Hi David!

  In Windows Explorer: you have folder options set to open in a new window? If so change to open in the same window (from the Explorer > tools > folder options)!

  Concerning
  Julia

• With regard to the mode of transport SYNC

  Version: 11.2.0.3
  Operating system: Unix/Linux platforms
  
  I'm new to Data guard
  
  It's that I understood on the SYNC mode after googling and read 11.2 doc. correct me if I'm wrong.
  
  SYNCHRONIZATION (synchronous Transport Mode)
  ======================
  
  With the transmission SYNCHRO mode, LGWR is not allowed to recognize that a commit succeeded until the LNS confirms that it again to retrieve the transaction was written to the Redo logs waiting in the standby.
  Until LGWR extracted this confirmation of LNS, the database is suspended and the validation operation is supported. That is to say. In the event of failure of a network between the (primary) production database and the standby database which prevents the
  again to be written in the newspapers waiting to roll forward, then the primary database will block.
  
  SYNCHRONIZATION method is also referred to as method "Zero data loss.
  
  But there is an attribute called NET_TIMEOUT for LOG_ARCHIVE_DEST_n parameter; Assigned (in seconds) decides how long LGWR should wait to hear from LNS on scripture to redo in Standby Redo Logs.
  
  The default value at 11.2 is 30 seconds. After 30 seconds, if LGWR cannot hear the LNS on a succesfull write to redo in Standby Redo Logs, process LGWR disconnects from the LNS and acknowledges the primary VERIFICATION and allow
  DB primary to continue treatment even if he can no longer communicate with the day before.
  
  This isn't strictly "zero data loss" as a VALIDATION has been recognized in the primary despite the entrance of again as a result of this change is not written for the eve SRL. Right?
  
  
  
  Question2.
  
  In all our Prod DBs, LOG_ARCHIVE_DEST_2 is set to the value below. No idea what type of protection is this DB in?

      MAXIMUM PROTECTION
      or
      MAXIMUM AVAILABILITY
      or
      MAXIMUM PERFORMANCE ?

  service="HEWRMS_DG", LGWR SYNC AFFIRM delay=0 optional compression=disable max_failure=0 max_connections=1 reopen=300 db_unique_name="HEWRMS_DG" net_timeout=30, valid_for=(all_logfiles,primary_role)

  This isn't strictly "zero data loss" as a VALIDATION has been recognized in the primary despite the entrance of again as a result of this change is not written for the eve SRL. Right?

  You'll only no loss of data if you have maximum protection. If the primary is unable to reach the day before, it stops after a fixed delay. Oracle recommend two standby mode if you want maximum protection.

  In available maximum primary will try to reach the previous day in the net_timeout value and whether it will commit the transaction and move. It will essentially drop down for maximum performance until it can connect to the waiting again.

  Check the mode of protection of data.

  select protection_mode from v$database;
  

  Should read: you only have the guarantee of no data loss with maximum protection. You have no data loss with maximum availability until your watch and network are correct.

  Published by: Freddie Essex on 5 June 2013 11:18

• with regard to the convening of the lov by the corresponding button and pressing f9

  Hi all
  I use forms [32 bit] Version 6.0.8.24.1 (Production).
  Let me explain my problem with an example.
  Consider a text element that is database required field (in which a LOV is attached to it)
  so to call lov, I wrote 'list_values' k-listval Trigger.
  so that every time you press the key corresponding to the LOV (say f9) the corresponding lov will be displayed.
  I have a requirement that I should show a button so that when the user presses this button the LOV must appear and values must be assigned when the user selects the value in the list.
  trigger of w-b-p wrote

  go_item('item_name');
  do_key('List_Values');

  In essence I provide an option that the user can bring the LOV by pressing f9 or by pressing the button said above.
  My problem is that I am getting error oracle when the user does not enter this field. (which I am trying to solve.)
  If I put 'required' to above said article property to 'Yes' then the error we can avoid, but it does not allow to select the list with the key.
  
  Note: i have set the property post in list to 'yes '.
  
  Thank you...

  Your article defined on mandatory, but when click on your button LOV - you try to navigate out of the element.
  Be sure to set your property of navigable mouse button = False

• Firefox can not deal with links to the Washington Post. Get the invalid URL error. Works fine on Safari, however.

  The home page of the Washington Post works very well. But if I try to open a link on this page, I get the message:
  Invalid URL
  The URL requested ' / wp-dyn/content/article/2011/03/05/AR2011030500289.html?nav=hcmodule ', is not valid.

  Reference #9.243b543f.1299342316.143eddb7

  The URL above is not the one shown when you move the link.

  Look in your tools-addons-extensions & see if you have "https anywhere" extension. If so, that's the problem. Click options, uncheck "Washington Post. That's all folks.

• With regard to the UPDATING of the data in the warehouse of data using various incremental DAC

  My client is planning to spend some discoverer to OLIVIER but before need us answers.
  
  (1) my client requires data to be updated hourly (load using the CAD) because they use a lot of data in real-time.
  We do not have many data update (for example 10 bills in one hour + others). How long it usually takes to refresh these tables in data using the CAD wareshouse?
  
  (2) while the table is can getting updated we use this table to generate a report? If so, what is the State of the data? Stale or incorrect (undefined)?
  
  (3) how does updating of analytical work? It is a module at a time or it treats all 3 modules (GL, AR and AP) as a single unit of refreshment?
  
  I would appreciate if I can get an answer to all questions.
  
  Thank you

  So much for the answers:
  (1) should not be too much trouble for a such small amt of data. Depends on your implementation plan to the DAC that can always be created as new and can be customized to load the data for these tables... (Star Schema) - about 15-20 minutes, because it does so many things outside the loading table.

  (2) report to OBIEE will give the previous data because I believe that Cache will be (Shud be) turned on. You will get the new data in the reports after the update is complete and cache is erased using different methods (the favorite voting event)

  (3) once again to end analytics or any other module, you'll OOTB plans. But you can create your new plans and run. GL, AR, AP are also provided separately...

  Hope that answers your question... You will learn more about running through Oracle docs... especially for DAC

• With regard to the decode function

  Hi all
  
  I want to know abt decode function in sql-oracle
  I... e passing parameters to decode using decode using the ': ' bind the parameter
  
  Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) of EMP;
  I declared the variable j in sql environment
  VARCHAR2 (20) OF THE VARIABLE J;
  I have the query exec
  and had the clerk as an input parameter
  but the o/p as iam
  JOB DECODE(:J)
  --------- ---------
  MANAGER
  MANAGER
  MANAGER
  SELLER SELLER
  SELLER SELLER
  SELLER SELLER
  CLERK CLERK
  SELLER SELLER
  THE ANALYST ANALYST
  CLERK CLERK
  THE ANALYST ANALYST
  
  JOB DECODE(:J)
  --------- ---------
  CLERK CLERK
  
  12 selected lines.
  
  SQL > PRINT J;
  
  J
  --------------------------------------------------------------------------------
  
  im not getting o/p
  so please hlelp me only: should be used not &
  This is my first thread.
  execuse me if no errors
  
  tons of thanks in advance to all

  Hello

  We can try like this...

  Begin
  : j: = 'CLERK ';
  end;
  /

  then, we execute your SQL query as below...

  Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) OF the EMP
  where JOB =: j;

  I think that this will solve your problem

  Kind regards
  Soak the Sevin rana

• I need advice with regard to the installation of items 12 on MacBook Air. Previous purchase was on PC.

  I have 12 items installed on my PC. I now also have a MacBook Air and want to reinstall on the Mac using Windows key code bought earlier. Firstly, is it something I can do? In other words, when I downloaded on my Mac using my previous acct information PC, I get an exe file, and not a dmg file? Second, if not possible, then I can use the upgrade to a Mac download version, or should I buy as a new user and get a new key code? Previous chat with Adobe said I could use the old key code, but I do not see how to select Mac instead of Windows. Thanks in advance. I'm new to Mac. No new items. I always use items on my PC, but also want to use on my Mac while traveling. Do not buy if not necessary, because I don't feel that 13 elements is significantly different from what I have already.

  Never mind. For 13 current purchase price is cheaper than the upgrade from 12 to 13. In addition, 12 is a unique platform software, so that the option is a no-go. Solved.

• With regard to the post

  Hi guru,.
  
  I am struggling to view events for waiting way systamatic...
  
  Ex:-request doen't appear presentable format.
  
  SQL > select event.
  2 total_waits,
  average_wait 3,.
  time_waited_micro 4,.
  5 wait_class
  6 v $ system_event
  7 where a test of ("read by other session ',' buffer busy waits")
  8.
  
  EVENT TOTAL_WAITS AVERAGE_WAIT TIME_WAITED_MICRO WAIT_CLASS
  ---------------------- ----------- ------------ ----------------- ------------------------
  buffer busy waits 4818 2.07 99816991 Concurrency
  read by another session 164662030.1 1.6040E + 11 critical I/O
  
  
  Please guide me as to how can insert oracle organized information in the thread in the community of the oracle...
  
  How can I insert the screenshot in the thread?
  Thanks in advance
  
  Published by: user12000301 on July 22, 2011 04:49

  Type:

  \

  Your query results here\
  

  It displays as:

  Your query results here