With regard to the mode of transport SYNC

Similar Questions

• protection tunnels works with the mode of transport only?

  Anyone know why protection tunnel works with the mode of transport only? If I change to tunnel mode, it stops working immediately.

  Thank you

  That's because Tunnel mode creates a new IP header that is modified when is coordinated, when the remote peer receives this new header which is concerned the Security numbers do not match what it generated. Using transport mode retains the original header and only encapsulates the payload.

• What are the requirements for the mode of transport san

  Hello

  I have a proxy physics vcb 1.5 (windows 2003 x 64), and I always use the command vcbmounter with san - m option.

  On the vcb proxy, I compile and run vixDiskSample on a disk to a virtual machine that is on the san lun, and I'm surprised that 'san' is not in the modes of transport listed.

  I don't have that:

  vixDiskSample-host vccenter-username username-password pass - vm "vmPath = / data center/vm/vm1 '-info ' [Storage1] vm1/vm1.vmdk.

  & gt;  Transport taken modes supported by vixDiskLib: file:nbdssl:nbd

  I installed this version: VMware-vix-disklib - 1.1.0 - 163495.i386.exe

  The virtual machine is power off.

  The SAN / HotAdd configuration you have for VCB should work without modification. Can send you the paper through a private message?

  Annick

• With regard to the application of Nook on the Surface RT. Is there a way to change the way that newspapers appear?

  With regard to the application of Nook on the Surface RT.  Is there a way to change the way that newspapers appear?  Like corners, they give a better way to navigate and get the overview for the different sections.

  Probably not "such what."  Next time you launch the application, make sure that the menu bar to it and see if there is a feedback icon.  You may be able to comment on what features you want and they can do just that.

• I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the same scale of assessment pr

  I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!

  Activation for CS is closed. Adobe provides you with a free replacement of CS2.

  Uninstall CS

  Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products

  Click English, download Photoshop CS2 and also copy the serial number that comes with it.

  Install CS2 and use this serial number CS2. There no need activation.

  Take your copy of the CS, it is no longer usable.

• With regard to the previous discussion on the recent settings of the workspace page

  With regard to the post Re: recent files page , when I went back to answer, there is no way to reply to the post.  After trying the settings using the provided screenshots, page of recent files always came every time.  So the answers you have provided are not correct for my particular case.  Finally, I tried without any control in the preferences and that my custom workspace save as I wanted.  Here is how I had to define it.

  Thank you.

  

  It is doubly strange.  I just check and that the other thread is not locked and can be answered.  Someone else has a problem, you reply to this thread.

  Secondly, I turn off the settings described works for me and Photoshop opens without MRU and start work space.

  You did _uncheck_ these settings?  I like the new workspaces, so mine are checked, but it clearly says _Show_ at the beginning of each line.

  

• With regard to the update of the locations of cards-oracle

  HII everyone,

  In my application, we using mapviewer, which was installed locally on our server, for map rendering and showing the locations of a client like pinball machines.

  Suppose that some places (address, City) is updated map... How mapviewer (which has been installed on our server locally) will update this site all in rendering...

  Thank you

  learner

  It depends on how you got the map features.  Mapfeatures are usually stored in the cache.  If a change in database may not appear in the card immediately.  If, however, given the characteristics of the map as a vectorlayer, then simple vector update updates map.  You should consider two options with regard to the update database process.  You can store the geometry as a function that is updated on the fly as change attributes of database, or you may use a database trigger to update the geometry when the attributes change.  Thus, using a combination of correct space architecture and mapviewer correct functions.

• With regard to the management of exceptions in coherence

  Hello
  I use c ++ connection of consistency
  
  try {}
  String::handle gridHandleCache = GridCacheName;
  
  if(hCommCache == null) {}
  hCommCache = CacheFactory::getCache (gridHandleCache);
  }
  else {}
  
  "cost < <" Info: "< < GridCacheName < <" Cache already in a State of assets "< < endl;"
  }
  }
  {catch (exception::handle Vex)}
  
  "' cost < < ' consistency exe;
  }
  {} catch (std::exception (e)
  cost < < e.what ();
  }
  catch (...) {
  cost < < 'unknown exception ';
  }
  
  
  When the error occurred (duration or other errors), I still get an exception unname. It will never enter the Exception::Handle part of vex.
  
  When he calls on Wrestling (Exception::Handle vex) {.} I want to separate the duration and connection error ecpetion sepeartyely.
  
  Can I know what would cause / or how to handle it separately.
  
  What are the mistakes is possible to connect / put/get/invoke (touchprocessor). serializable cast?
  
  
  -Thank you
  
  Edited by: 882600 August 31, 2011 05:51

  There are several ways to achieve this. Perhaps the simplest is to simply catch Exception as std::exception const &, or one of its derivatives, then call what(). However, if you want to use the specific exception hierarchy richer consistency, you can get the equivalent of the what() result by calling getDescription()-> getCString(). With regard to the rankings largely what types of exceptions are "fatal", which would be RuntimeException and its derivatives, but the scope which it was caught in general is going to be more telling.

  Mark
  The Oracle coherence

• With regard to the archiving of strength

  Hi all
  
  When I need to take the last log backup for archiving files, which controls of the below two is better
  
  1 ALTER SYSTEM ARCHIVE LOG CURRENT;
  
  2 ALTER SYSTEM SWITCH LOGFILE;
  
  The two commands give the same result?
  
  Kind regards
  Cherkaoui

  Hi Haran;

  alter system switch logfile--> switches to the following log file, regardless of the mode that the database is in ARCHIVELOG or NOARCHIVELOG mode. If the archivelog mode change system swicth logfile will generate the Archives of the redolog which was changed.

  change the current archiving--> oracle here log system passes current related to records and archives as well as all other newspapers not archived. It can be fired only the database that is in ARCHIVELOG mode.

  [http://download.oracle.com/docs/cd/B10501_01/server.920/a96519/backup.htm]

  Source:
  Diff between switch logfile and archive current log

  Respect of
  HELIOS

• With regard to the decode function

  Hi all
  
  I want to know abt decode function in sql-oracle
  I... e passing parameters to decode using decode using the ': ' bind the parameter
  
  Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) of EMP;
  I declared the variable j in sql environment
  VARCHAR2 (20) OF THE VARIABLE J;
  I have the query exec
  and had the clerk as an input parameter
  but the o/p as iam
  JOB DECODE(:J)
  --------- ---------
  MANAGER
  MANAGER
  MANAGER
  SELLER SELLER
  SELLER SELLER
  SELLER SELLER
  CLERK CLERK
  SELLER SELLER
  THE ANALYST ANALYST
  CLERK CLERK
  THE ANALYST ANALYST
  
  JOB DECODE(:J)
  --------- ---------
  CLERK CLERK
  
  12 selected lines.
  
  SQL > PRINT J;
  
  J
  --------------------------------------------------------------------------------
  
  im not getting o/p
  so please hlelp me only: should be used not &
  This is my first thread.
  execuse me if no errors
  
  tons of thanks in advance to all

  Hello

  We can try like this...

  Begin
  : j: = 'CLERK ';
  end;
  /

  then, we execute your SQL query as below...

  Select the WORK, decode(:j,'CLERK','MANAGER','ANALYST','EXEC',JOB) OF the EMP
  where JOB =: j;

  I think that this will solve your problem

  Kind regards
  Soak the Sevin rana

• With regard to the Transport of JCA

  Hello
  
  The JCA transport supports URI rewriting in a stream of messages of the proxy service. In what context the use URL rewriting?
  Any help with this would be really appreciated.
  
  Concerning
  Priya.

  Hi Priya,

  Rewriting of URI is used to identify a business service URI when running and it is generally used for content based routing. One of the examples of this kind are here-

  Oracle Service Bus - Business Service Endpoint URI - change during execution

  Kind regards
  Anuj

• With regard to the rules of container LDAP Sync

  Hi all
  
  I hold at the disposal of a user to the OU = organisation1 which is an organizational unit that I created in the OID.
  
  I have IOM installed and configured successfully with LDAP synchronization. I changed my file of container rules by default to:
  
  <>container-rules
  < user >
  < rule >
  act_key < expression > = 21 < / expression >
  UO < container > = organisation1, cn = users, dc = test, dc =, dc is com < / container >
  < / rule >
  < expression > default < / expression >
  UO < container > = roles, cn = groups, dc = test, dc =, dc is com < / container >
  < / rule >
  < / role >
  < / container-rules >
  
  
  Also, I added the act_key attribute and it mapped to OID using the LDAPUser.xml file and when I create the user before importing the LDAPContainerRules file, I see the attribute named 'organization' in LDAP is updated with the value 21 when I select my organisation1 as the organization.
  
  Now, I import the XML LDAPContainerRules the correct path and it imports successfully. But when I try to create the user, an error is thrown. In the rear part, I see that the error is exception of null pointer for the generateAndValidateRDN of the LDAP synchronization method. What he is unable to verify the expression set here and that's why the container is not defined which explains why it does not work.
  
  I set this attribute act_key in the LDAPUser XML with type value number since that was the only one with which it was working properly.
  
  Now is the error that I'm facing because of the incorrect attribute name in the expression or is something different altogether?
  
  Please guide me still.
  
  Thank you
  $id

  I don't think you can do it on organizations, this looks like a limitation of the product at least until 11.1.1.5.1. Take a look at the following meta-link article:

  * IOM: LDAP container rules of Organization [ID 1461250.1] *.

• With regard to the update system - restriction of access to records admin app

  Regarding the system update in this thread to update system - restricting access to folders app admin , I can not answer in this thread because I'm not a mod and there is no reply button.

  My question concerns the public record, what we do with it?

  S ' there is a placed file in it can it use liquid?

  - I assumed that the front-end server can access this directory, but (from the front end) we won't be able to use the new API v3?

  - Other applications access to the updated files? That is to say. He says in public, it is that? It is not safe at all in other words?

  -Is the case more as a temporary workspace or the (public) long-term storage? Can other apps delete files there? That is to say. I might need to make sure that a file exists before you assume it's there.

  Hello

  1. The files in the folder admin app can run modules and liquid (if you do not use another library of client-side library which is in conflict with the liquid syntax)
  2. Yes, front-end can access files on this folder (you cannot list the contents of the folder of front end) and you can access the REST API using module_data; direct access to the API is not possible, because you will need to be authenticated
  3. Yes, other applications can access the files put there, same as possible that nobody knows the URL of the page
  4. It is a public storage for long-term applications. Apps cannot delete files in other folders for apps, but they can read;

  Cristinel

• What are the limits of size of virtual machine to use the mode of transport NBD in VADP?

  We have some problem to run backup VADP with EMC² Networker 7.6.2 with a virtual machine which, in total, amounts to about 2.3 TB of data.
  The configuration is the following:

  VM (file server) running on Windows 2008 R2

  The backup server (physical) is running Networker 7.6.2 and is also host to proxy for backups VADP.

  VMware vSphere, ESXi 4.1 Update 1

  When we make a snapshot of the file server ESX, no problem.
  When we try a support VADP through Networker, it fails with the following error:

  Creating a snapshot for ' vm-2153'...»
  Task is-1% complete
  Task is 95 percent complete
  Task is 95 percent complete
  Task is 95 percent complete
  Task is 95 percent complete
  74854:nsrvadp_save: VMware following associated error has occurred: cannot create the snapshot "_VADP-backup_" for VM: vm-2153.  Details: "an error has occurred for task"CreateSnapshot_Task".  Details: Operation timed out. ».
  80405:nsrvadp_save: could not create snapshot for VM 'PWVFILE05 '.
  The temporary "V:\backupvmware\PWVFILE05" for VADP directory deleted.

  Other (smaller) customer VADP backups are running thin.

  Someone told me that the business day following a certain limits on the size of the virtual machine.
  He said when he sized VM is equal to 1 TB or more, we should NOT use NBD.

  Anyone explain to me or provide me with evidence?

  Yes, I think it's the best option, visitors don't like the 'limits' much, then maybe look into the SAN transport mode

  Good luck!

• With regard to the peripheral area of authentication/authorization

  Hello

  We use the ACS 5.7 in our environment, I need to add a router to the authentication and authorization in this ACS.

  When I added the device, sound have authenticated and go to mode 'user Exec. No mode 'PRIVILEGED '. Please let me know how can we do that this device should be authenticated and go in privileged mode.

  Thank you

  Reverchon

  Hi reda,.

  With RADIUS we actually push Radius IETF-service type (6) attribute with an administrative value. Please check the screenshot: