With the help of adctrl while applying the patch ORS.

Similar Questions

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  Hi all

  I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.

  The version of the Weblogic Server is 10.3.6

  The version of RMS App is 13.2.6

  While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW

  After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3

  Checking for conflicts...

  No conflict detected

  Removal of the Patch ID: EJUW...

  Result: success

  [oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install

  Checking for conflicts...

  Detected A - conflict to solve and run the installation of the patch again

  Conflict condition details below:

  Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA

  [oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3

  Encountered unrecognized patch ID: ZLNA

  Any suggestions how to solve and apply the fix successfully Jan would be useful.

  Thank you.

  Hello

  Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.

  To designate a directory to download the hotfix, follow these steps:

  Start the smart update.

  On the Smart Update main window, choose file > Preferences.

  The Preferences dialog box appears.

  In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.

  https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm

  Thank you

  Aishwarya

• Problem with the patch download on MW version 2.18

  I using MW level 11i 12.1.1.
  In the "task: 11i Patching pre-staged at level 1 - Create: fusion 2 enemy of patch - part 1 (mandatory) 11i Rel" step fails with the patch of fusion.
  Script is not able to download the patch.
  I get the following message.
  
  Please let me know if anyone has experienced the same problem and has a solution for this.
  
  ###############################################################################
  Unique SUMMARY NŒUDS DETERMINE - based on the NŒUD, USER and APPL_TOP
  ###############################################################################
  forms of applications
  
  ###############################################################################
  ACTION: installation on the node: apps, patch = patches_PRE_1703_1.txt - Wed Jun 22 12:31:58 EDT 2011
  ###############################################################################
  Fixes downloading of the patch list file: patches_PRE_1703_1.txt, using the name of Patch: patches_PRE_1703_1
  File Patch_List=/dev8bkp/oracle/ORAMNTC/oramntcdb/10.2.0/eof/patches/patches_PRE_1703_1.txt
  
  Audit by downloading the fix: 4963569
  Check for free the current Applications and if hotfix patches_PRE_1703_1.txt is applied.
  Specified current output is 11.5.10.2 based on the fnd_product_groups table.
  
  ###############################################################################
  WARNING - seems that 4963569 has NOT been applied(ad_bugs/ad_applied_patches) or improper installation (cat 1-3)
  ###############################################################################
  ... Verification of the existence of the patch: 4963569 on the node local /dev8bkp/oracle/ORAMNTC/oramntcdb/10.2.0/eof/patches
  ... Not found, trying to updates.oracle.com ftp
  ... About to get patches: 4963569
  
  Download script get_from_url_1703_4963569.sh running in /dev8bkp/oracle/ORAMNTC/oramntcdb/10.2.0/eof/patches
  
  ################################################
  
  ERROR - looks like ftp failed, see ls-l p4963569\ * (see above) of EOF_PATCH_TOP
  EOF_PATCH_TOP=/dev8bkp/Oracle/ORAMNTC/oramntcdb/10.2.0/EOF/patches
  Journal of session: /dev8bkp/oracle/ORAMNTC/oramntcdb/10.2.0/eof/log/INSTANCE_1703/get_from_url_4963569\*.log
  ===================================================================
  (1) ask the administrator trying to run the ftp script manually.
  OR
  (2) HOME/.netrc value, then try to Script: /dev8bkp/oracle/ORAMNTC/oramntcdb/10.2.0/eof/log/INSTANCE_1703/get_from_url_1703_4963569.sh
  
  
  
  Kone

  This hotfix will be included in version 2.19 MW, which is out today.

  -Vikki

• Referred with the patch 5.5U3 excluded. After the connection, host said he has 5.5U3?

  I created a patch base and excluded patch ESXi550-Update03 because of concerns about KB2133118. I scanned a host and checked that this patch was not on the list that would apply. I've updated, installed and watched the host reboot. After it restarts, it indicates that the generation on this host is now ESXi 5.5 build 3029944, which suggests that there are currently on ESXi 5.5 U3, which I didn't.

  Once to test, I created a basis separately which consists only of this patch - if I fix the line base and analysis of the host in question, this shows that 5.5 cumulative U3 is not present... but the build numbers conflicts.

  Is this host on 5.5 U3, or not?

  Hi Nebben

  I'll try to give general information. 'ESXi550-Update03' is a winding newsletter. Which means that, if you have 55 GA version of ESX and if you wish to arrive directly at the 55U3 level, to create a baseline in this bulletin and install. It contains all fixes released from 55GA until 55U3.

  But Vmware publish individual newsletters (per each change VIB) also in each version. Which means that, for every update, there will be individual ballots and a rollup great newsletter.  Either you select all the individual ballots or the cumulative report card.

  From your question, I think that you have selected all the other ballots except this cumulative bulletin of "ESXi550-Update03. If you did that, you could have already included 55U3 individual bulletins in your base line (there are 13 individual newsletters published under 55U3 himself). So, your machine is already on 55U3.

  Please check if you have selected the ballots with the name 'ESXi550-2015092XX-UG"(replace XX with numbers) in your base line while patch. If so, you have already installed 55U3.

  Another way to find out if you have installed 55U3, is to paste the output of 'list of vib software esxcli.

  Please let us know of your final comment

• YES - 67619:Interim patch 8940108 collide with the patches [8833297]

  Hello
  
  I am trying to upgrade 12.1.1 to 12.1.3 in my RHEL4 server.
  
  From metalink doc
  Guidelines for preparation of database E-Business Suite Release 12.1.1 upgrade [ID 761570.1]
  for 11.1.0.7, required patches are (road E)
  
  * 7111245
  * 7211965
  * 7330434
  * 7486407
  * 7627743
  * 7639602
  * 7684818
  * 8199107
  * 8639653
  * 8940108
  * 9026927
  * 9066130
  * 9554727
  * 9743057
  
  Where we apply the latest 8 patches
  I just after the command. For there is a pre-req patch 8833297. patch 8199107
  I applied the two. After this completed applying the patch 8639653.
  During the 8940108 conflict patch application take place now.
  
  ==================================================
  ApplySession failed when due diligence: Prerequisites check "CheckPatchRollbackDependents" for self-catering patches failed.
  System intact, OPatch will not attempt to restore the system
  --------------------------------------------------------------------------------
  The following warnings occurred during execution of OPatch:
  1) YES - 67619:Interim patch 8940108 conflict with patches [8833297] in the House of the Oracle
  --------------------------------------------------------------------------------
  
  OPatch failed with the error code 74
  ===================================================
  
  What can I fixes restore 8833297 and 8940108?
  
  Thank you
  Kouadio

  Hello

  I just after the command. Patch 8199107, there is a pre - req patch 8833297.

  The Patch 8199107 README file says nothing about pre - req. so, how did you end up this fix?

  What can I fixes restore 8833297 and 8940108?

  I would say that Yes.

  Thank you
  Hussein

• I'm having a problem with the patch in PS:CC tool

  Please see this video, as it will demonstrate the problem more clearly than anything I could say.

  http://www.screencast.com/t/bVkNkapww

  When you use the patch tool, I select an area, then click on and drag to an area that I want to replace this content selected with. This replacement must be a direct replacement of 1:1 (WYSIWYG). However, when I release the mouse button, rather than fill the selection area with exactly what I've been, I get - good - stuff. Sometimes, it seems that it running a blur instead of a patch. Sometimes it appears like he is trying to patch, but pulling in the area. There is almost always a blur involved effect.

  I tried to ask on some forums and people stop me changing my brush settings, but the patch is a selection tool, not a Brush tool. There is no brush setting to change.

  I don't see any pen options, which could partially explain what I see. It looks like a setting high feather is enabled.

  I tried to reset the tool room, as well as all the tools and even deleted the entire PS config file (ugh, that sucked) but the problem persists.

  Any thoughts on what is causing this problem and how to fix it?

  Again, please see the video because it will clear up almost any question what the problem actually looks like.

  For the sake of clarity and to save people time, Todd wonders about the behavior of the hotfix when using it to repair the area next to the young boy the tool head.  Todd gets a fuzzy dark tone well enough regardless of the options he uses.

  

  IMO that is what I expect to happen due to the proximity of the other image that is the boy's neck and the lines of force of his shirt.  I would not choose to use the patch tool in this situation.  Content Aware Fill allows a better dagger shot it.

• The new update with the Patch for Camera Raw does not work. Code U44M1P34

  Hello

  I have a problem with the new CC update - including the patch for Camera Raw 8.7.1

  Error code: U44M1P34

  Photoshop CC (2014)

  After Effects CC (2014)

  Brisge CC

  The log file shows 1 fatal error:

  FATAL: Payload ' Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number that follows.

  I tried to uninstall reinstall. Did not work at all, because the same problem appears.

  I have not installed in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw update.

  Are there other people with the same problem? Any ideas?

  Thanks in advance and greetings,

  Joerg

  Hi Jeff,

  It seems I found a dirty solution, but work for my problem on this site: Getting fatal exit Code 34 when installing an application

  To change these 3 names of folders and reinstall my programs worked fine without error:

  Adobe PCD-> Adobe PCDold

  backup-> backupold

  Caps-> capsold

  Now, the programs are on the actual status with all the updates that are included and everythings looks fine.

• Problem with the Patch Set 2 (11.1.1.3.0): suspendVisitingContext

  I use: JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
  Given that I've updated 11.1.1.2.0 to 11.1.1.3.0, I can always deploy my application to the WebLogic server integrated but not externally.
  I thought it may be caused by the use of an older version of WebLogic on the external server, so I installed the new version of WebLogic, but I still have the same error:
  
  < 3 May 2010 20:51:06 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "AdminServer" released on May 3, 2010 20:51:06 CEST. Details of the notification:
  WatchRuleType: Journal
  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' BEA-101020') OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))
  WatchData: DATE = may 3, 2010 20:51:06 CEST SERVER = AdminServer MESSAGE = [path of the module: mon_project ServletContext@13194766[app:MY_PROJECT: / mon_project spec-version: 2.5 version: V2.0], request: [weblogic.servlet.internal.ServletRequestImpl@18dd7c6
  GET /MY_PROJECT/faces/adf.login-success?_adf.ctrl-state=a4u3jtypb_4 & _adf.no - new-window-redirect = true & _afrLoop = 2160319053905063 HTTP/1.1
  Connection: keep-alive
  User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; Chrome/4.1.249.1045 en-US) AppleWebKit/532,5 (KHTML, like Gecko) Safari/532,5
  Referer: http://MY_PROJECT/faces/adf.login-success?_adf.ctrl-state=a4u3jtypb_4 & _adf.no - new-window-redirect = true
  Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
  Accept-Encoding: gzip, deflate, sdch
  Accept-Language: en-US, en; q = 0.8, en - CA; q = 0.6, en; q = 0.4
  Accept-Charset: ISO-8859-1, utf-8; q = 0.7, *; q = 0.3
  Cookie: ADMINCONSOLESESSION = xQCjLfTBfCvW65mvcTQFq1GvHbFQw5GcTVByT7gKkMrJpdLGGd2p! 1272577567; JSESSIONID = Y3KbLfbXJj12QlZHvvDX8nhyP2QlF1GKsf9xKfvC8p8C3pDlnQvx! 2063798385
  Root cause]] of ServletException.
  java.lang.NoSuchMethodError: oracle.adf.view.rich.component.fragment.UIXInclude.suspendVisitingContext (Ljavax/faces/context/FacesContext ;) V
  to oracle.adfinternal.view.faces.taglib.region.IncludeTag$ FacetWrapper.setupVisitingContext (IncludeTag.java:665)
  to oracle.adfinternal.view.faces.taglib.region.IncludeTag$ FacetWrapper.processFlattenedChildren (IncludeTag.java:601)
  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:160)
  at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:75)
  at oracle.adfinternal.view.faces.renderkit.rich.PanelSplitterRenderer._renderPane(PanelSplitterRenderer.java:1035)
  Truncated. check the log file full stacktrace
  >
  
  Where I replaced the name of our project by mon_project.
  
  I think it may be related to the use of the 'running the Application (11.1.1.2.0) development' which cannot be updated, downloaded from: http://www.oracle.com/technology/software/products/middleware/htdocs/fmw_11_download.html
  as explained in http://radalcove.com/blog/?p=34
  I can still deploy on the external server with the old version of JDeveloper.
  
  Any idea of solution?
  Do you think it is something that I can fix it, or it may need the intervention of a person of Oracle?
  
  Thank you
  JP

  Hello

  As far as I know the Jdev + libraries must correspond to the version WLS + libraries.
  If you need a WLS 10.3.3 with ADR 11.1.13 for JDev 11.1.1.3

  Take a look at this: 11.1.1.3 certification information

  HTH
  Paul

• Problem with the Patch CS6 tool

  When I use the Photoshop CS6 patch tool, it keeps the selected area selected after having patched. I don't know how do to change again to where he won't not selected area after the patch has treated? It is tedious to have to press Control + D to deselect if I'm doing several fixes quickly. Any ideas on how to change this setting? I tried to 'reset' of all the tools, but he didn't change.

  Once you select and then move anywhere, it should go away. If not, try one of these two ways to reset the tool:

  

• skyzero can I get your help with the patch windows 7 for AOE II Expansion Weird Graphics

  Hello sky zero, I read your messages for audio fixed for AOE II Expansion Gold edition. You seem to be very clear and well informed. So far, I can't know if there is a patch to fix my problem of graphics (compatibility issues) between this game and Windows 7. When I was loading win 7, they said remove AOG he had some compatibility issues with win7 and re - install after. Everything I did. The game works and has sound but the graphics are very weird like the water red and sparse grass. I tried a number of resolutions but got no response. My question is simple. Microsoft has a patch because they knew it was a compatibility problem or not. If Yes, where can I find? If unknown, then who should I contact at Microsoft? Could not find even a Department there. It's all about AOG III. It's a completely different game format. Can you advise me please?

  Hi and thanks. I tried both methods - for compatibility between vista and XP compatibility. None worked. However, two of them each listed twice with different service packs, so I can run this test through each for each service pack. I go to the game site, but could not find information on windows 7. I know it's an old game, but it's one we love.

  I check in the device management control panel. It does not say anywhere the words 'Graphics Manager. It doesn't have a category name adapters with a thing called Intel (r) G33/G31 Express Chipset Family under him. That he would.  Further to the bottom of the list is also a place called IDE ATA/ATAPI controllers. In this category, that it listed two channels 0, plus two channels of 1 listed plus two other things. They are: Intel (R) 82891G (ICH7 Family) Ultra ATA Storage controllers and also Intel (r) 82891 GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0. In the category ' computer, it says PC ACPI x 86. Other categories in the list include processors. In this category is two things. Both say the same thing - Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz Thre is a category called system devices and there are too many things to list. There is a category that says audio, video and game controllers. In this category, he said VIA High Definition Audio.  I'm sorry for the list of all this stuff. Any of these are the category that fits for agraphics card?  I'll also revisit the site of Microsoft for the game to check if they have a patch now.  Thank you.

• Flash CS6 continues to freeze the launch, even with the patch update or fontinfo.txt.

  Flash CS6 freezes as soon as he gets to work screen, if I open a file, or by the program itself.  It is after that I have updated Flash CS6 through Update 2... twice!

  I also emptied on fontinfo.txt, set the read-only... and when that does not work, I just deleted the file.  Nothing is changed.  The only way to get Flash for the 2nd time to work is to restart my computer again.

  What I am doing wrong?  I'd appreciate any help.

  Mini discharge suggests a problem with Java runtime environment. We try to understand the real issue. We will update the thread as we get more information.

  -Dia.

• Installed Yosemite on I fixed mac Java with the patch from Apple that Photoshop works on MacBook Air, but not on iMac

  I called Apple and they said call Adobe.  How do you call Adobe with a problem?

  I use Photoshop 5.1

  Reinstall Photoshop CS5 to replace damaged by the Mac OS 10.10 update files.

• Problems with the patch 11 1 2 2 300

  Hi all
  we are trying to install patch 11 1 2 2 300 on our 11 1 2 2 environment.
  someone at - he had problems after you apply this hotfix.
  your contribution is greatly appreciated.
  
  Thank you.

  .302 patch solves problems when files disappear if it is the bug you're talking about.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• associated with the patching of 11.1.2 to 11.1.2.1

  Hi Experts,
  
  I want to upgrade 11.1.2 to 11.1.2.1 (planning, EPMA, Reporting to end.)
  
  
  After installing and configuring using maintenance release which is still necessary to migrate to 11.1.2.1 relase.
  
  
  You need one no matter what the application/Essbase/EN of planning migration process. (as erlier 9.3.1 to 9.3.3)
  
  
  Please suggest.
  
  Concerning
  Kumar

  These steps look ok, shouldn't it need to import all data that already exist and that the products have just been improved.
  To upgrade a planning application you want to just get into it, I connect directly into it and then click upgrade.

  See you soon

  John
  http://John-Goodwin.blogspot.com/