With the help of first to make the DVD menu

I've been tinkering with Premiere Pro CS4 to make some videos for my site web and who's who. Now, I would like to try my hand at creating a watchable DVD TV. First stupid question... What do I need to make a menu?

My 'film' will be the three parts each part with many clips. I would like the user to be able to 'play together' or select one of the three categories, play fair (category) or open it and allow individual choices. (my film will be a selection of old ~ 1960 ish converted 8mm film)

That... any of the CS4 suite of programs can create such a menu or I need to get some more software? ... recommendations...?

Thanks for your time

Ralph

Go to the forum still help again

I also find it very helpful to read the Forum again. Most of the problems were settled there, already. At the same time (before the passage of the forum), I read every article in there. By the way, I got. Lots of good advice, "solutions and workarounds.

Hunt

Tags: Premiere

Similar Questions

Problems with the DVD on Pavilion dv6-2010sa

HP Pavilion dv6-2010sa laptop computer (under Windows 7 x 64), I bought less than a week ago.

I started the disk recovery software to back up my OS in the event of future disasters.

I used a DVD + disc, so it would take 3 discs to do the recovery disks.

First DVD completed successfully. Software asked me to enter the disk 2.

This is where I started to have problems.

Drive recovery software couldn't recognize my blank dvd +.

The drive makes a lot of noise, but then stopped making noise.

I tried a few other DVDs +, but to no avail.

I rebooted the computer laptop and tried but same problem.

So I tried to play a dvd movie to see if it was the disk recovery software or the dvd player.

He would not play a dvd movie.

I also tried to play an audio CD but the same problem.

The drive icon appears in Windows Explorer, but does not display any info (or open the CD / DVD) when I have a CD or a DVD in there.

So it seems to be a problem with the DVD-> grateful not any CD / DVD

If someone can advise?

PS. I searched the driver DVD (so I could Reinstall driver) but the HP Web site does not contain the driver for 2010sa (DVD software only)

Thanks in advance

Gary

Problem solved.

Uninstall the device dvd player:

-Device Manager > do a right-click post dvd/cd player > uninstall the device

Restart the laptop and OS will reinstall the driver and the DVD/CD drive should start working again (well this is what has happened to me)

Office restarts itself when it is stopped with the start menu and the power button.

Original title: stop problem

My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

Hello
1. Press (Windows key) + R and type "regedit" and press enter.
Find the following key:

Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

3. double-click on "PowerdownAfterShutdown.

Then,
Change it to '0' if it is '1' OR
Change it to '1' if it is '0 '.

And press ENTER.

Then reboot andtry to stop.

If this does not work, make sure that you change the value in regedit back to what she was original

Try this one:

Put the laptop to sleep then let it restart itself. Then run command prompt and

Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

During the phase of writing DVD from Movie Maker, if I have something or play a game, which will interfere with the DVD burning?

It takes several minutes or even an hour or two to burn the DVD, if I wanted to use MS Word or MS Access play a game while I'm waiting, my typing or the game interferes with burning DVDs?

It takes several minutes or even an hour or two to burn the DVD, if I wanted to use MS Word or MS Access play a game while I'm waiting, my typing or the game interferes with burning DVDs?

========================================
This is not an easy to answer question because to a large extent, it would be
depends on your system resources. However... the video coding
is a task intensive CPU and it is certainly possible that multi-tasking
the process could lead to problems.

Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Help with the Spry menu and templates

Hello. I'm still learning Dreamweaver and stumbling through this all on my own. I just discovered models today and I'm hoping to use them to update my menu2 spry navigation bar. Except that it does not work for me. Is it because you just can't do that with spry? The menu does not update correctly when a new file with the model is stored in subfolders.
I have the site set up with everything in the folder under the root except for the home page index.html file.
so it's like this example:
http://www
about/mission/index.html
When I go to new-page open-model the temaplte and save it in the folder... links from the template do not update correctly.
They look like this:
model is bound as follows in the models folder in my root directory:
.. / about us
.. / about / mission
the index in the all file page is linked to this:
.. / about us
subject/mission
The files inside the records change perfectly. But no matter what I do the topic of navigation does not update right. What's meaning? I can't understand how to post code here!

No not really... list of default file name? I mean if I type in http://websitename.com/about/ it will go get the index.html file in this folder.

It will be? Then a similar link in your page should work.

What happens when I use this:
Mission
is that it does not change in the subfolders. The... / the rest when it should not. Now I have not downloaded with links like this. I know that it doesn't work on my computer but when I look at the code I can see that the code is wrong.

Look in the Site definition advanced settings > models > don't rewrite paths related document. If this is true? If so, uncheck the box.

I am not happy with the new menu bar. I made a mistake in the change. Want to use the button refresh or open a new tab when requested without

I made a mistake some how. I'm not the best a computer news as the new avg with the research changes. I want to return my old menu bar. I want to be able to open a new tab without going through an open search window. I don't like new tiny 'file above it don't help me. I want the option to click the Refresh button bit. How to get back to what I had before?

I don't know what happened to your menus and toolbars. Has this happened after an update of Firefox, or a change in your add-ons?

(1) you can switch between the Firefox button orange with its abbreviated menus and the classic menu bar, by using the following text:

ALT + v (open the menu Classic view) > toolbars > Menu bar

(2) in the new tab, you wanted it is empty? Are there currently AVG research? If you want to get rid of the search for AVG, you probably have to disable to remove one or more modules from here:

Orange Firefox button or classic menu Tools > Modules > category: Extensions

Does make a difference?

(3) the reload button is nestled at the end of the address bar, after the star icon and the drop-marker. If you prefer that your button to reload on the bar itself, you can do that using the personalization feature.

ALT + v (open the menu Classic view) > toolbars > customize

In order to avoid the button reload to slip into the URL bar, you can perform the following actions:
- Move the button reload for the left side of the address box
- Move another button between the address box and reload
- Move another button between the reload and stop buttons
- Reverse the order of the reload and stop buttons
You can get as you wish?

REGZA 37A3030DB menus come for a few seconds & disappear; works with the DVD

Saturday afternoon, TV channels stopped working. The TV works fine with DVD or laptop, but not with the channels (i.e. we cannot watch live TV) and the menu buttons appear on the screen for 2 seconds max before disappearing. It already happened but has himself set normally after 24 hours. It's almost 48 hours now, and I'm worried. If anyone can help or make suggestions, it would be great. My feeling is that this happens after an auto-update firmware, so once the TV is working again, I want to find a way to disable these automatic updates. Thank you. R

Just for you, everyone knows that, after 48 hours, television seems to have reset itself and now works again. R

change in value of ListBox on right click with the duration menu

Hi all

With the help of LV 2012...

I have a listbox multicolumn containing a single column of text values. I'm trying to implement the following features:

Right click on an item will cause a runtime menu to open... user select 'Settings' in the menu and a dialog box with the settings specific to the element appears.

The menu of the runtime has been easy. The problem is that the value of the listbox (line) does not change with a single right-click. I currently have to left click to change the value and then right click for the menu. Any way to change the value with a right-click?

Thank you!

Charlie

Rather than change the value, you can do something like this - use the mouse to the bottom? event for the listbox control. Because it is an event of filter, it must run everything first (although you will need to place a frame earlier in the structure of the event). Use the coords for this event and call Point to the method of lines of columns on the listbox. This will give you the line, now you can keep in a shift register. Do not throw the event, and this will cause the menu event, where you can now use the value of the line in front.

Webview from landscape orientation to portrait mode causes the font size to become smaller and a problem with the context Menu

Hi, I have a webview with inline html. It works fine except that when I pass in landscape mode, the screen fills fine and the police grows, but when I go back to portrait fonts are tiny, even smaller then when initially in the portrait. I am installing this on a Z10 with cascades 10.1 SDK. Is this a Bug somewhere in the SDK or BB10?

Another problem I have is in Web mode, the shortcut menu appears when I touch a Word. I is no need to use the context menu. How can I get rid of him. In the case where I would like to someday use this menu, I would need to add code to it. I can't find the code. Where can I find it?

Thanks for your help

Concerning

Roland

I' to propose taying far WebView as much as possible and using TextArea (with type HTML). There are still a few bugs present in WebView that make it unpleasant to use.

You cannot get rid of the context menu, so it will disappear once you remove WebView. You can still share with other methods.

This may seem more work and it's probably, but it's going to do to improve the user experience and fewer headaches for you.

I have a problem with the DVD drive not detected on Windows 7.

I built a new PC (I've built a few of them). This time is not considered my ASUS BD player with Windows 7 DVD burner. It is not in either Device Manager just do not at all recognized. The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem. Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted. Please help me solve this problem :-)

Original title: optical drive not recognized...

Hello

Please contact the Microsoft Community.

You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

Please answer these questions-

(1) that you get an error message or error code?

(2) did you have performed the steps in troubleshooting?

(3) have you made changes on the computer before the show?

I would like more information about the issue.

Method 1-

I wish that you are running the fixit-

Hardware devices do not work or are not detected in Windows

http://support.Microsoft.com/mats/hardware_device_problems/en-us

Method 2-

Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

I would have you look at the article-

Your CD or DVD drive is missing or is not recognized by Windows or other programs

http://support.Microsoft.com/kb/982116#top

Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

Thank you.

problem with the spry menu bar
Hello. I'm having a problem with the submenu appears at the top of the page instead of the sub menu. I have added settings and changed % to the "ems", but still does not work. I think it has something to do with being right under the menu spry flash movie. Can anyone help? Thanks in advance.
Here is the link to the site:
link to the site
Hello

The problem is due to the
Tags that you added all through
the spry menu.
In IE, which not only align text Center but it also aligns the
- who owns.
  This changes things.
  
  First of all, change this:
  - Homepage
  - On
    We
  - href = "link_pages/services.html" > services
    
    Reservations
  - <>
    href = "link_pages/staff.html" > staff
  - Class = "MenuBarItemSubmenu" > news
    
    Events
  - Fido
    Friends
  - <>
    href = "link_pages/Resources.html" > Resources
  - Contact
    We
    
    Career opps
  To do this:
  - Homepage
  - About us
  - href = "link_pages/services.html" > services
    - Reservations
  - Staff
  - Class = "MenuBarItemSubmenu" > news
    - Events
  - Friends of Fido
  - Resources
  - Contact us
    - Career opps
  So, if you want your text aligned to Center:
  
  Change this in the sections file:
  
  UL. MenuBarHorizontal a {}
  display: block;
  cursor: pointer;
  background-color: #000000;
  Padding: 0.5em 0.75em;
  color: #FFFFFF;
  text-decoration: none;
  }
  
  To do this:
  
  UL. MenuBarHorizontal a {}
  display: block;
  cursor: pointer;
  background-color: #000000;
  Padding: 0.5em 0.75em;
  color: #FFFFFF;
  text-decoration: none;
  text-align: center;
  }
  
  I hope this helps.
  
  Take care
  Tim
  
  "rio333" wrote in message
  News:ft6src$RHS$1@forums. Macromedia.com...
  > Hi. I'm having a problem with the submenu appears at the top of the page
  > instead of the under the menu. I've added parameters and modified % to
  > "ems".
  > but still does not work. I think it has something to do with flash
  > film
  > under the spry menu. Can anyone help? Thanks in advance.
  > Here is the link to the site:
  > http:www.fidoandcompany.com
  >

Satellite L20: what DVD-DL is compatible with the DVD - RAM UJ-8415

Hello

could someone please tell me * who DVD Double-layer are compatible with the carpet * a DVD - RAM UJ-8415 * (of * Toshiba Satellite L20-112 *, * model No.) PSL2XE 00M00GGR *)? :| According to the specification, this carpet * a DVD-RAM supports the DL technology, although in reality, it is not as simple as that. It does not burn even all DVD of 'single layer '. I've already spent a lot hell of money just trying to find the right DVD DL to be used on the machine, but unfortunately without success.

I'd appreciate any help or advice on this subject!

Regarding most amiable of the Germany.

:)

Hello

I use a very simple freeware application called DiscInfo http://discinfo.rpc1.org/ of
to get information about the compatible CD/DVD and disc capacity.

Is it not all CDs & DVDs are compatible with each player. Usually, the Toshiba manual provides a list of compatible CD and DVD.
The mediums referred to in the user manual should work for sure.

Just FYI; found this read/write properties maximum speed:

_ * Reading * _
24 x Max CD-ROM
DVD - ROM 8 x Max

* _Write_ *.
CD - R 24 x Max
CD - RW 4 x Max
DVD - R 8 x Max
DVD - R (Double Layer) 2 x Max
DVD - RW 4 x Max
DVD + R 8 x Max
DVD + R (Double Layer) 2.4 x Max
DVD + RW 4 x Max
DVD - RAM 5 x Max

Problem with the shortcut menu custom BB10

Hi all

I am currently trying to implement a context menu that is customized with my webworks app. So far I'm not creating a normal webworks / bbUI app, but I'm trying to add some features of bbUI. So to speak, I have a few different elements in my application, each of them triggers the context menu, as expected. So far so good. But now I have some problems to detect which element / div has triggered the call from context menu. How can I get this information?

I add the context menu like this:
```
var contexts = [blackberry.ui.contextmenu.CONTEXT_ALL];
var itemRead = {
    actionId: 'actionRead',
    label: 'Read Article',
    icon:'../assets/images/new/add.png'
};

blackberry.ui.contextmenu.addItem(contexts, itemShare, function(arg1) {
    console.log("itemShare: " + arg1);
});
```
But as I have already described arg1 is null, and I have no idea on how to detect the appellant.

Can someone help me, please?

I thank very you much in advance!

See you soon,.

Sven

You need the feature called custom context. This will give you that you the information on that DIV has been pressed. When you set your DIV, add a tag called:data-webworks-context

Thus your div would look something like this:
```
    1
    2
    3
```
```
blackberry.ui.contextmenu.addItem(contexts, itemShare, function(id) {
    console.log("itemShare: " + id);
});
```
You are passing a JSON for the CCM object and asking him to come back to you, the ID of the item that called the context menu, so you can do a job. Let me know if that helps

Problem with the start menu of windows 8.

So my type of computer is Windows PC. My windows 8 Start menu automatically brings me too my "Apps". Then I have to click an arrow button and it brings me to 'start '. I can't find a way to 'lock or PIN' from the menu 'Start '. So, whenever I push the menu button start it brings back me to the "Apps". Is there a way to solve this problem, so that the start menu button will lead me to 'start '?

Hi Sarah,.

Please contact Microsoft Community.

I understand the inconvenience that this may cause. I'll be happy to help you with that.

I suggest you to put the computer in a clean boot state and check if it helps.

Refer to this article how to perform a clean boot in Windows.

http://support.Microsoft.com/kb/929135

Note: refer to the section how to reset the computer to start normally after a boot minimum troubleshooting.

Keep us informed of the status of the issue.

Dynamic buffers / Dialog Box with the context Menu (or list box)

Hi people,
I did experiment with stamps dynaimc for awhile and I got pretty far with this topic. I can not make it work are the context menus (or list boxes) in dialog boxes. The context menu is displayed correctly in the dialog box, but there is no content even though its meaning. The javascript of the definition of content looks like:
It corresponds to a group of Popup in the PDF file named 'Test '.
popupGroup: 'Test ',.
listItems:
[
{popupItems:}
{
The list of items of the context menu, positive number indicates the default selection
'Test 1': + 1,.
'Test 2':-1.
'Test 3':-1.
"Test 4":-1,.
'Test 5':-1
}
}
]
You have no idea what's wrong with the code above?

I did a quick check of your code, and there is a problem with an exception that is thrown in this line: return Collab.user;

If you take this point, the code works correctly. Why do you use the Collab object?

What to do with the DVD files?

I have 3 elements of first, with Windows XP. I'll skip the details of the complete system as it is primarily an attempt to understand the DVD files.
If I burn to DVD PE3 records, what program or method to use to burn a physical DVD of these files?
Thank you
Mike

Mike,

When you burn the file, you should get a VIDEO_TS folder with the necessary inside IFO, BUP and VOB files. The entire folder is what you want. There will also be an Open DVD folder (think that's the correct name), but it is not necessary for the DVD-video, because it is pre only.

Good luck

Hunt

With the help of first to make the DVD menu

Similar Questions

Maybe you are looking for